Eizo DuraVision FDF2306W User manual

Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Guide
(separate volume) carefully to familiarize yourself with safe and
effective usage.
• Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC to using the monitor.
• The latest User’s Manual is available for download from our web site:
http://www.eizoglobal.com
Color LCD Monitor
User’s Manual

2
Location of Caution Statement
AVERTISSEMENT
WARNING
WARNUNG
<For USA-California Only>
CR Coin Lithium Battery contains Perchlorate Material - special handling may apply.
Refer to www.dtsc.ca.gov/hazardouswaste/perchlorate.
This product has been adjusted specically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.

3
Notice for this monitor
Notice for this monitor
This product is suited for displaying surveillance camera images.
This product has been adjusted specically for use in the region to which it was originally shipped. If the
product is used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
· Power cords provided with the product
· Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to
the composition of the rubber. Check the desk surface before use.
It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on, and then adjust the monitor.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and
maintain a stable display.
When the screen image is changed after displaying the same image for extended periods of time, an
afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for
extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer
to “Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may
appear on the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker,
please contact your EIZO representative.
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such
as interference patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage
your panel. (If the pressure marks remain on the panel, leave the monitor with a black or white screen. The
symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do
not attempt to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew
condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the
monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the
monitor.

4Notice for this monitor
Cleaning
Attention
• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet
or panel, and also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.
Note
• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.
The stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor
according to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

5
CONTENTS
CONTENTS
Notice for this monitor ......................................... 3
Cleaning .................................................................... 4
To use the monitor comfortably............................. 4
CONTENTS............................................................. 5
Chapter 1 Introduction....................................... 7
1-1. Features ......................................................... 7
1-2. Controls and Functions ............................... 8
●Before Using Remote Control ......................... 9
1-3. EIZO LCD Utility Disk...................................10
●Disk contents and software overview ............10
1-4. Basic Operations and Functions ...............11
●Basic operation of the Setting menu..............11
●Functions........................................................12
Chapter 2 Adjusting Screens .......................... 13
2-1. Compatible Resolutions/Formats..............13
●Analog Input (D-Sub) .....................................13
●Digital Input (DVI-D, HDMI: PC signal)..........13
●Digital Input (HDMI: video signal) ..................13
2-2. Setting the Resolution ................................14
2-3. Adjusting Color ............................................15
●To select the display mode (Color Mode).......15
●To perform advanced adjustments ................16
●Adjustable settings in each mode ..................16
●To adjust brightness .......................................17
●Adjusting the brightness and color of
black “Black Level”.........................................17
●To adjust contrast...........................................17
●To adjust the color saturation.........................18
●To adjust hue..................................................18
●To adjust color temperature ...........................19
●To adjust gamma............................................19
●To adjust gain ................................................ 20
●To set the enhancement ratio of
ContrastEnhancer ......................................... 20
●Enabling Overdrive.........................................21
2-4. Screen Adjustment ..................................... 22
●Digital Signal Input ........................................ 22
●Analog Signal Input....................................... 22
2-5. Screen Size Changing................................ 26
●Analog Input (D-Sub)/Digital Input
(DVI-D, HDMI: PC signal) ............................. 26
●Digital Input (HDMI: video signal) ................. 27
Chapter 3 Setting Monitor ............................... 28
3-1. Adjusting Volume........................................ 28
●To turn the volume up/down.......................... 28
●To mute the sound temporarily ..................... 28
3-2. Switching sound source for HDMI signal
input ............................................................. 29
3-3. To adjust the sound level ........................... 29
3-4. Enabling/Disabling DDC/CI
communication ........................................... 29
3-5. Locking Operation Buttons ....................... 30
3-6. Showing and hiding the EIZO logo ........... 30
3-7. Setting Language........................................ 30
3-8.
Compensating viewing angle deciency ...31
3-9. Changing the authentication method for
HDMI signal input.........................................31
3-10. Resetting the Monitor to the Default
Settings........................................................ 32
●To reset the color adjustments...................... 32
●To reset all adjustments to the default
settings.......................................................... 32
Chapter 4 Visibility Optimizer function.......... 33
4-1. Optimizing visibility.................................... 33
●Conguring “Visibility Optimizer” ..............34
●Conguring “Low-light Correction” ............34
●Conguring “Defog” .....................................35
●Conguring “Outline Enhancer” .................... 35
●Conguring “Noise Reduction”...................... 36
●Checking the setting status........................... 36
Chapter 5 Power Saving Functions ................ 37
5-1. Setting Power Saving ..................................37
●Monitor ...........................................................37
●To change the exiting method from the
power saving mode ....................................... 38
●Audio Output ................................................. 38
5-2. Setting Power Indicator.............................. 39
5-3.
Enabling/Disabling Automatic Brightness
Adjustment “Auto EcoView”
....................... 39
5-4. Reducing Glare “EcoView Optimizer”...... 39
5-5. Checking the power saving level .............. 40
Chapter 6 Connecting Cables ......................... 41
6-1. Connecting Multiple External Devices......41
●To switch among input signals .......................42
6-2. Connecting External Speaker ................... 42
Chapter 7 Troubleshooting.............................. 43
7-1. No picture .................................................... 43
7-2. Imaging problems
(for both digital and analog)...................... 44
7-3. Imaging problems (for digital only) .......... 44
7-4. Imaging problems (for analog only) ......... 45
7-5. Other problems ........................................... 46

6CONTENTS
Chapter 8 Reference ........................................ 47
8-1. How to Attach the Optional Arm ................47
8-2. Detaching/Attaching Stand Base.............. 48
8-3. Attaching/Detaching Cable Holder........... 50
8-4. Displaying Monitor Information .................51
8-5. Specications ............................................. 52
8-6. Preset Timing .............................................. 55
Chapter 9 Glossary .......................................... 56
Appendix.............................................................. 59
Trademark ............................................................... 59
License / Copyright................................................ 59
FCC Declaration of Conformity ............................ 60
LIMITED WARRANTY..............................................61
Recycling Information ............................................70
China Measures for RoHS Compliance in
ChinaRoHS...............................................................74

7
Chapter 1 Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• 23″ wide format LCD
• Supports a resolution of 1920 × 1080
• HDMI connector × 2
• A Color Mode function that provides optimal display modes for video captured by surveillance
cameras
Refer to “To select the display mode (Color Mode)” (page 15).
• EIZO’s unique “Visibility Optimizer” technology
- Low-light Correction function
Makes dark areas of images visible by analyzing the image and correcting the brightness.
This function is effective in situations such as when viewing images with dark areas that are not easily
visible, or when using the monitor in a bright environment.
- Defog function
Improves the clarity of images that appear blurred due to the effect of fog or mist, by correcting the
brightness and color.
Also, you can use the “Auto Fog Detection” function to adjust the level of “Defog” correction based on the
density of fog/mist in the image.
- Outline Enhancer function
Adjusts the perceived resolution of images.
”Skin Tone Detection” and “Text Detection” can be used to correct the effect of the “Outline Enhancer”
setting on skin tone and text color.
- Noise Reduction function
Reduces the blocking noise that occurs when compressing digital images.
Refer to “Chapter 4 Visibility Optimizer function” (page 33).
• Remote control enables easy operation, setting and adjustment of the monitor.
Refer to “1-2. Controls and Functions” (page 8).
• Standard VESA mounting holes
Wall mounting is also supported.
• Up View
The viewing angle is adjusted so that the screen looks like a front view when the screen is looked up.
Refer to “3-8. Compensating viewing angle deciency” (page 31).
• Displays HDCP (High-bandwidth Digital Content Protection) protected contents.
• A 2-year long-term warranty for 24-hour continuous use.

8Chapter 1 Introduction
1-2. Controls and Functions
Monitor
Setting menu*1
13
14 15
1 2 3 4 5 6 117 8 9 12
16
10
17
1. Auto EcoView sensor Detects ambient brightness (Auto EcoView function (page 39), EcoView Optimizer
function (page 39)).
2. Remote control
detector Receives the signal from the remote control.
3. button Switches input signals for display (page 42).
PC1 (DVI) → PC2 (D-SUB) → HDMI1 → HDMI2
4. button Changes the color mode.
5. button Switches “Visibility Optimizer” on or off.
6. button Turns the power on or off.
7. Power indicator
Indicates the monitor’s operation status.
Blue :Operating
Orange :Power saving mode
Red :Power off
OFF :Main power off
8. Main power switch Turns the main power on or off.
9. Power connector Connects the power cord.
10. Input signal connector
The following connectors are available on the monitor rear in order of left to right.
• HDMI connector × 2 (HDMI1, HDMI2)
• DVI-D connector
• D-Sub mini 15-pin connector)
11. Line input connector Connects external devices such as a PC. (Stereo mini jack)
12. Line output connector Connects a speaker with built-in amplier (page 42). (Stereo mini jack)
13. Headphone jack Connects the headphones.
14. Speaker Outputs audio source.
15. Security lock slot Complies with Kensington’s MicroSaver security system.
16. Stand*2 Adjusts the height and angle (tilt and swivel) of the monitor.
17. Handle
Handle used for transportation
Attention
• Firmly grasp and hold the monitor by the bottom while grabbing the handle, and
carefully convey the monitor so as not to drop it.
*1 Refer to “Basic operation of the Setting menu” (page 11) for how to use.
*2 An optional arm (or an optional stand) can be attached by removing the stand (refer to “8-1. How to Attach the
Optional Arm” (page 47)).

9
Chapter 1 Introduction
Remote Control
1. PC/HDMI
Switches input signals for display.
PC PC1 (DVI) PC2 (D-SUB)
HDMI HDMI1 HDMI2
2. MODE Changes the color mode.
3. MENU Displays/Exits the Setting menu.
4. MUTE Mutes sound temporarily.
5. POWER Turns the power on or off.
6. EcoView Displays/Exits “EcoView Menu”.
7. / / /
Provides the menu selection as well as the adjustment
and setting of a function.
/ Displays the brightness adjustment menu
(page 17).
/ Adjusts the volume (page 28).
8. ENTER Determines an item on the menu screen, and saves
values adjusted.
9. RETURN Returns to the previous menu in menu operation.
10. Visibility Optimizer
Congure the Visibility Optimizer function settings.
(page 34).
MENU Show/exit the “Visibility Optimizer” menu.
ON/OFF Turns the “Visibility Optimizer” on or off.
FOG DET Turns the “Auto Fog Detection” on or off.
●Before Using Remote Control
How to install battery
1. On the back of the remote control, slide the battery cover off in the direction of an arrow.
2. Insert a battery with the positive side up. (Battery model number: CR2025)
3. Reattach the cover.
10
5
6
9
1
2
4
7
8
3

10 Chapter 1 Introduction
Receivable Range of Remote Control
Use the remote control inside of the range as below.
5m
5m
20°
20°
7m
5m
30°
30°
7m
5m
1-3. EIZO LCD Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk
contents and the overview of the software programs.
●Disk contents and software overview
The disk includes software programs for adjustment, and User’s Manual. Refer to Readme.txt le on
the disk for software startup procedures or le access procedures.
Item Overview Windows
Macintosh
Screen adjustment pattern les Used when adjusting the image of analog
signal input manually. √ √
User’s Manual of this monitor (PDF le) √ √
A Readme.txt le √ √