EK-Quantum Reflection2 PC-O11D XL D5 PWM D-RGB User manual

USER GUIDE
DISTRIBUTION PLATE
EKQuantum
Reflection2ROG Hyperion D5 PWM D-RGB

The installation of the product is intended to be undertaken by
an adequately trained and experienced person. You are installing
the product at your own risk. If you are not sufficiently trained
or experienced or feel unsure about the installation procedure,
please refrain from installing the product yourself and contact
our tech support for assistance. We disclaim our liability for any
damages to the product and incidental, consequential, or indirect
damages incurred due to improper or inappropriate installation.
Before you start using this product please follow these basic guidelines:
Read this manual carefully before beginning the installation
process.
The EK-fittings require only a tiny amount of force to screw
them firmly in place since the rubber O-ring gaskets ensure the
liquid seal.
Corrosion-inhibiting purpose-made coolants are always
recommended for any liquid cooling system. EK recommends
EK-CryoFuel coolants for worry-free usage.

- 3 -
TABLE OF CONTENT
BOX CONTENTS 4
DISTRIBUTION PLATE DIMENSIONS 5
TECHNICAL SPECIFICATIONS AND PRODUCT PARTS 6
PREPARING THE CHASSIS 7
INSTALLING THE DISTRIBUTION PLATE 8
RECOMMENDED DISTRIBUTION PLATE CONFIGURATIONS 9
FLOW DIAGRAM 11
CONNECTING THE D-RGB LED STRIP 12
CONNECTING THE PUMP 12
TESTING THE LOOP 13
SUPPORT AND SERVICE 14
SOCIAL MEDIA 14

- 4 -
BOX CONTENTS
EK-Quantum Reflection2ROG Hyperion D5 PWM D-RGB
Screw M4 x 5 DIN7984 (7 pcs)
Allen Key 2.5 mm (1 pc)
EK-Loop Multi Allen Key (1 pc)
Mounting mechanism - Hyperion D5
PWM D-RGB ; EAN: 106748

- 5 -
DISTRIBUTION PLATE DIMENSIONS
130 mm
398 mm
28.5 mm
103 mm
56.5 mm
19.5 mm
47.5 mm
131.5 mm
152 mm
172 mm
201.5 mm
222 mm
242 mm
271 mm
298 mm
374 mm
28 mm
74 mm
35 mm
368 mm

- 6 -
TECHNICAL SPECIFICATIONS AND PRODUCT PARTS
4
12
11
15
13
2
3
10
5
6
9
7
8
Technical Specification:
Dimensions with the attached pump (W x D x H): 130 x 28 x 398 mm
- Reservoir volume: ~283 ml
- D-RGB LED count: 23
- D-RGB cable length: 500mm
- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)
Position EAN Description Quantity
1106667 Bottom plate (Plexi) 1
2106668 Top plate (Plexi) 1
3106671 Led cover (Black e.) 1
4104599 Mylar sticker 1
55154 OR 52 x 3 mm 1
63831109837597 EK-D5 PWM (12V SATA) Pump 1
7105913 Pump holder 1
8100663 EK - Badge 1
98311 Screw M4 x 20 DIN7984 4
10 8251 Screw M4 x 22 DIN7991 5
11 8312 Screw M4 x 16 DIN7991 43
12 106672 OR Set 1
13 102639 EK PLUG G1/4 12
14 100815 LED D-RGB strip 500/400 mm 1
15 3831109834282 Plug cover 12
1
14

- 7 -
PREPARING THE CHASSIS
Before installing the distribution plate, carefully read the
PC case manual.
STEP 1
First, remove the PC case’s back, top, and side panels.
STEP 2
STEP 2
After removing the panels, the inner radiator mounting bracket
cover also needs to be detached.
STEP 1

- 8 -
STEP 2
Secure the distribution plate from the backside with six (6) M4 x 5
DIN7984 Screws and Allen Key 2.5 mm.
STEP 2
INSTALLING THE DISTRIBUTION PLATE
STEP 1
Before installing the distribution plate into the PC Chassis,
it is recommended to install the side radiator with fans.
Otherwise, placing the distribution plate into the final
position is harder.
Carefully insert the distribution plate into the PC Chassis. The bottom
shield can also be removed before placing the distribution plate.
STEP 1
DISTRIBUTION
PL ATE
BOTTOM SHIELD
SIDE RADIATOR
WITH FANS
For this step you will need:
Allen Key 2.5 mm (1 pc) M4x5 DIN7984 Screw (6 pcs)
M4 x 5 DIN7984
SCREW

- 9 -
RECOMMENDED DISTRIBUTION PLATE CONFIGURATIONS
GPU OUTLET
SIDE RADIATOR OUTLET
SI DE R AD IATO R
INLET
To complete your loop, all ports must be used as marked in the
image.
All remaining unused ports must be closed with supplied plugs,
using the EK-Loop Multi Allen Key.
If one of the prescribed components will not be installed
(ie. side radiator or GPU block) then one INLET and one
OUTLET port must still be joined together in order for
this distribution plate to function!
Only one INLET and one OUTLET port for the GPU
connection can be used, while all other INLET and
OUTLET GPU ports must be closed with G1/4 plugs.
TOP RADIATOR
OUTLET
CPU OUTLET
CPU INLET
TOP RADIATOR
INLET
DRAIN
GPU INLET

- 10 -
FILL

- 11 -
FLOW DIAGRAM

- 12 -
CONNECTING THE D-RGB LED STRIP
Plug the 3-pin connector of the distribution plate D-RGB LED light
to the D-RGB HEADER on the motherboard. The LED will work if the
pin layout on the header is as follows: +5V, Digital, Empty, Ground.
D-RGB Header
RGB Header
CONNECTING THE PUMP
The EK-D5 PWM pump has two connectors.
1. SATA Connector: It must be connected directly to your PSU at all
times as it is used to power the pump.
2. 4-pin PWM fan: It can be connected to your motherboard’s
CPU_ Fan or designated water pump header. It can also be
connected to a controller. This cable is used to control and report
the rotational speed of the pump. If it’s not connected, the pump
will run at maximum speed (100% PWM).
SATA
CONNECTOR
4-PIN PWM FAN
CONNECTOR

- 13 -
To make sure the installation of EK components was successful, we
recommend you perform a leak test for 24 hours.
When your loop is complete and filled with coolant, connect the
pump to a PSU outside of your system. Do not connect power to
any of the other components. Turn on the PSU and let the pump
run continuously. It is normal for the coolant level to drop during this
process as air collects in the distribution plate.
Inspect all parts of the loop, and in the eventuality that coolant leaks,
fix the issue and repeat the testing process. Ensure that all hardware is
dry before the system is powered on in order to prevent any damage.
TESTING THE LOOP

In case you need assistance or wish to order spare parts or a new
mounting mechanism, please contact:
https://www.ekwb.com/customer-support/
For spare parts orders, refer to the page with “TECHNICAL
SPECIFICATIONS AND PRODUCT PARTS” where you can find the
EAN number of each part you might need.
Include the EAN number with quantity in your request. Mounting
Mechanism EAN can be found under “BOX CONTENTS”
Thermal pads are readily available in the EK shop
EKWaterBlocks
@EKWaterBlocks
ekwaterblocks
ekwaterblocks
EKWBofficial
SUPPORT AND SERVICE
SOCIAL MEDIA