EKIZNSN F073 User manual
Owner's
Manual
Model: F073
Size: 20''
Weight: 9.58lbs
Please read all safety instructions prior to installing your
ceiling fan and save this document for future reference.
If you are in doubt with any of the information provided
or diculty installing your fan, please the email customer
▶Before you begin installing the fan, shut power o the
circuit breaker for the fuse box.
▶Read all instructions and safety information before
installing your new fan.
▶All wiring must be in accordance with national and local
electrical codes.ANSI/NFPA 70.If you are unfamiliar with
wiring, use a qualied electrician.
▶Do not bend the blades while installing,balancing the
blades,or cleaning the fan.
▶Do not insert foreign objects in between rotating fan
blades.
▶Make sure the installation site you choose allows the fan
blades to rotate without any obstructions.
▶To Reduce the Risk of Electric Shock,Disconnect the
electrical supply circuit before installing the light kit.
▶After you install the fan,make sure that all mounting
components are secured to prevent the fan from falling.
▶Turn the fan o and wait for the blades to stop
completely before performing any maintenance or
cleaning.
Safety Rules
1
1
Plate Installation
1
• For wooden ceiling
Drilling a pilot hole in
your ceiling with the
power drills rst, then
secure the plate with
wood screws
Wood screw
ceiling
Expansion screws
Mounting Plate
Mounting Plate
Attach the mounting plate to the ceiling. There are two
types of screws included in the pack.
• For concrete ceiling
Drill a hole in the base
material with a hammer
drill and a correctly
sized carbide drill bit
for the anchor and
clean out the hole
of all debris. Knock
expansion screw into
the hole and then
tighten it with a wrench
2
2
Wiring Preparation
2
1. Rotate the bottom
cap to secure it to the
blades, then secure
the side bolt into the
cap with a hexagon
wrench in case of the
blades falling or loosen
Tips:
Seek the help of another person to hold the stepladder in place and to
lift the fan up to you once you are set on the ladder.
J-HOOK
2. Lift fan towards the
ceiling to suspend
from mounting bracket
using security cable
loop and washer hook.
Then you can start
wiring without holding
the fan body.
3
3
1. Put receiving unit into the top of the fan body and
fastened it with electrical tape to avoid movement.
2. Make wire connections according to wire colors,
labels and diagram above.
Wiring
3
White
Live(Black)
Neutral(White)
Black
WARNING
Disconnect the electrical supply circuit before wiring to reduce the risk of
electric shock.
4
4
Mount Fan to Bracket
4
L-shape scew
location hole
Once wire connections are completed, lift fan body and carefully align
collar with mounting bracket. Tabs on ceiling plate should seat into
channel on inside of fan collar. Rotate fan so that set screw holes on
fan body align with set screw holes on ceiling plate. Take care to not
pinch or damage internal wires.Insert and rmly tighten two canopy
screws from screw pack.
Note: Do not tighten down set screws until all
three are partly screwed in.
CAUTION
Align the marked L-shaped screw hole on the fan collar to tab stuck
with the red sticker on the mounting plate. Otherwise, the fan body will
not t the plate.
5
5
Remote Control
5
CAUTION
If the indicator light does't bright while pressing any buttons, then check the
battery rst. It may be reversed or out of power.
CAUTION
The remote is pre-paired with the fan. If the remote does not work, please
re-pair as follow:
Long press the "Pair Code" button within 5 seconds when the fan is
powered on. The light ashes, then the remote is connected with the fan
successfully
6
6
APP Control
6
APP available at iPhone's APP Store & Google Play
Store on Andorid.
Caution
If the QR-Code above is not valid, please scan the code below.
7
7
Here is the APP Connection Guide on iPhone:
(Connection for Android devices are similar)
1. Scan the QR-Code to download the APP and register an
account as perthe instructions
3. Open the APP. If your Bluetooth is o, the notication will
pop up. Go to Settings, then open the Bluetooth.
4. Power o the fan and then power it on again, and press the
“Pair” button within 10 seconds. If the light ashes 3 times,
the pairing is successful.
2. Log in the account, and click "+" to add the device. You
can edit the device name, room, and choose the device
type(such like fan light)
APP Connection
7
8
8
Maintenance
Here are some suggestions to help maintain your fan
• Because of the fan's natural movement, some connections may
become loose. Check the support connections, brackets, and
blade attachment twice a year. Make sure they are secure.
• Clean your fan periodically to help maintain its new appearance
over the year. Do not use water when cleaning. This could damage
the motor, or possibly cause electrical shock.
• Use only a soft brush or lint-free cloth to avoid scratching the
nish. Cleaning products may damage the nished
• There is no need to oil your fan. The motor has permanently
lubricated bearings.
• If installed in a coastal, humid environment, regular surface
cleaning may be necessary to avoid deterioration or oxidizing
eects of salt or other corrosive elements. A Damp Location rating
is not an assurance of nish durability. Preventative measures
should be taken depending on the environmental exposures your
fan will undergo to preserve and protect the nish quality and
appearance of your fan.
WARNING
Before servicing or cleaning your fan, switch power o at the service panel
and lock the service disconnecting means to prevent power from being
switched on accidentally.
9
9
Troubleshooting
Please read all installation instructions carefully.
After reviewing the following tips, if you are unable to solve
a problem, please contact customer service for additional
assistance
Fan not reponding to remote control
• Check that all wire connections are secure and made as instructed.
• Verify that power is on and reaching the receiver by a voltmeter.
• Verify that controller batteries are installed with proper polarity as
indicated inside the battery cover
Fan makes repetitive ticking noise
• Check for obstructions in the rotor path.
• Make sure mounting hardware at the ceiling is secure.
• Make sure all other hardware and blade attachments are tight.
• Give fan adequate "Break in Period" of several hours to several
days then repeat steps above.
Light does not work
• Check wire connections at ceiling and receiver.
• Conrm that LED wire leads and terminal block are properly
connected to the LED board.
Fan makes humming noise
• Be sure you are using the control set supplied with your fan
• Make sure all ttings are rmly secured. Loose parts will often
cause vibrational noise or humming. Removal and re-attachment
can sometimes remedy such resonant vibrational noise.
Fan woobles
• Make sure the mounting plate and hardware at the ceiling are
secure and rmly fastened. If necessary, use the wood screws
provided to further secure the outlet box to the joist.
• Carefully lower motor housing and verify that the mounting plate is
secure to the outlet box, screws are tight.
Other manuals for F073
1
Table of contents
Other EKIZNSN Fan manuals
