EKT LKV373 User manual

HDMI Extender
User Manual
LKV373 HDMI EXTENDER
LKV373 is designed to convert
HDMI signal to standard TCP/IP and
transimit by internet cable or Lan.
With the advantage of TCP/IP standard,
it can transmit HDMI signal source from
HD STB,DVD,PS3,HDMI display card
etc to HD projector, DLP,LCD,LED and
other audio visual equipments.
.
Package Contents
Package Contents
Features FAQ
P1 P2 P2 P3-P5 P6 P6
IMPORTANT SAFETY INSTRUCTIONS
1.Do not unplug the device ,when it is
in using, keep distance from
inflammable and explosive devices.
2.Power Supply :DC 5V ,Use only the
supplied power supply unit ,Do not
use the power supply if it is damaged.
Package Contents
Package Contents
Technical Specifications
Installation GuideInterface Specification
HDMI Extender
Sender HDMI Extender
Receiver DC 5V/1A 2pcs User Manual
www.ekt2.com
Your Partner To Technology

Features
Interface Specification
DC5V Power input
HDMI input
Video bandwidth:165MHz
Cat5e/6 Port
HDMI output
Interface Specification
Features
Extends HDMI 1080P up to 100 meters for 1080p over one CAT5
Supports LPCM 7.1 Audio,Dolby Digital Plus,Dolby TrueHD and DTS Master Audio
Follow the standard of IEEE-568B
Supports resolutions up to 1080p Full HD
Supports LAN bandwidth: 100M
HDCP compliant
Extends by Router connection or LAN connection ,Cable length requirements are as follows
CAT5 Maximum 80 meters between two Devices
CAT5e Maximum 100 meters between two Devices
CAT6 Maximum 120 meters between two Devices
www.ekt2.com
Your Partner To Technology

Installation Guide
Installation Guide
Cat5e/6 cable Follow the standard of IEEE-568B
General Connection
Transmission distance can be up to 100 meters for 1080p over one Cat5
www.ekt2.com
Your Partner To Technology

Installation Guide
Installation Guide
Router Connection
www.ekt2.com
Your Partner To Technology

Installation Guide
Installation Guide
LAN Connection
Note: Above connection method is using common UTP CAT5 Cable test.
www.ekt2.com
Your Partner To Technology

FAQ
Technical Specifications
FAQ
Q:Yellow light of Lan port is flashing but slowly!
A:1)Check whether HDMI Extender TX and HDMI
Extender RX is reversed.
2)Check whether HDMI source device output HDMI signal Correctly
3) Change the HDMI cable of TX.
Q:Yellow light of Lan port is flashing quickly but no display?
A: 1):If HDMI source is graphics card, please set the resolution to be
supported by display device.
2):Check whether HDMI cable of RX is well connected
3): Change the HDMI cable of RX
Q: Yellow Led light of Lan port is not light?
A:1)Check connection of network cable.
2.)Network cable is too long.
Q: Abnormal color display or flashing after all the devices are well
connected
A:1)Pls press reset button of HDMI extender
2):Following the standard of IEEE-568B
Power Supply 2pc X 5V/1A
Supports resolutions 480i@60Hz,480p@60Hz,576i@5
0Hz,576p@50Hz,
720p@50/60Hz,1080i@50/60Hz,1
080p@50/60Hz
Working temperature -10ºC ~ 60ºC
Link Connector
(Sender/Receiver) UTP/STP CAT5e/6
Power Consumption 3W (max)each
Relative Humidity 20%~90%
Dimensions 110x 58 x 26 mm
Weight 239g
Technical Specifications
Made in China
www.ekt2.com
Your Partner To Technology