ELAC LAZ 5100 User manual
Navigation Echo Sounder LAZ 5100
Reliable Depth Information for Safe Navigation
4
Specifications and Technical Data
LAZ 5100 at a Glance
L-3 Communications ELAC Nautik GmbH |Neufeldtstrasse 10 |24118 Kiel |Germany |Tel. +49 (0)431-883 0 |Fax +49 (0)431-883 496
DISCOVER THE UNKNOWN
Dimensions
Weight 6.1 kg
Dimensions 288 (height) x 336 (width) x 150 (depth) mm
Technical Data
Frequencies 24 / 28 / 30 / 33 / 38 / 50 / 100 / 200 kHz
Single or dual frequency; compatible
with a variety of existing transducers
Transducer impedance 50-150 Ω
Display of data 10.4" graphic TFT color display;
selection of display layout; night or
day display mode; optional printer
Basic scale ranges 0-10 / 20 / 50 / 200 / 500 or 2,000 m
Units Meters, fathom, feet selectable
Measuring accuracy Better than ±1% of depth reading
Minimum sounding depth approx. 0.5 m (below transducer)
Trim correction 5 m
Draft correction Up to 29.9 m
Output power Adjustable, max. 1,000 W RMS
(depending on transducer installed
and range selected)
Pulse repetition rate max. 180 pulses per minute
Gain control TVG, automatic and manual gain
control for bottom finding
Special features Recording of time and date (internally
generated); data output (depth values
etc.), time and date; indication of po-
sition if externally available; Operator
Fitness Check (OFC); mute control for
acoustic alarm
Interfaces Output: DPT according to NMEA 0183
and DIN EN 61162-1
Input: NAV data according to NMEA
0183 and DIN EN 61162-1
Environmental conditions According to EN 60 945
Operating temperature -15° to +55° C
Protection code IP 53
Power supply 90-260 V AC, 50-60 Hz
Optionally 10-30 V DC
Supply voltage monitoring
Power consumption approx. 35 W
IMO compliant
BSH BSH / 4612 / 4061453 / 09
USCG 165.107 / 6 / 1
CCS HB07Q00001_01
Data displayed in dual frequency mode (above) and single fre-
quency mode (using one of the system's various color options)
Navigation Echo Sounder LAZ 5100
2 3
General
The water depth below a vessel is one of the most im-
portant information for safe navigation. The LAZ 5100
navigation echo sounder guarantees a reliable detec-
tion of the sea bottom in shallow as well as in deep
water and is designed for an automatic and smooth
operation. It meets the requirements of IMO for navi-
gation equipment and is type approved by BSH, USCG
and CCS.
Best selling navigation aid
Until today already more than 6,500 units have been
sold. The LAZ 5100 is suitable for vessels of all sizes
and can be used both for new buildings and moderniza-
tion projects. It can operate a variety of transducers both of L-3 ELAC Nautik and
other manufacturers, thus it is qualified for an easy modernization and repair of
navigation echo sounder systems.
Improved design
The electronic unit can operate 8 different frequencies and a menu controlled
transducer and performance setting allows an easy set-up of the echo sounder
system. The large 10.4” high resolution display shows detailed depth informa-
tion. The water depth is presented as a colored echogram to show the trend of
the water depth below to vessel. In addition the current water depth is displayed
digitally together with information about the ship's position, date and time. The
display can be dimmed in 9 steps for a non-dazzling readout during twilight and
night.
Reliable operation
The menu guided operation with direct access to all functions enables the ope-
rator to set-up the echo sounder system to his requirements. Automatic gain
control and TVG give reliable bottom detection both in shallow and deep water
without additional actions of the user. An internal memory of 24 hours stores the
depth, position, date and time.
Easy interfacing
All required input and output interfaces are available to integrate the LAZ 5100
into the ship's navigation system. NMEA inputs and outputs, VGA and a cen-
tronics interface are provided to connect peripheral devices, like digital slave
displays and printers.
Transducers
L-3 ELAC Nautik has developed special transducers for the operation with the
LAZ 5100. Together with the transducer LSE 297 (50 kHz), LSE 329 (100 kHz)
and LSE 313 (200 kHz) the echo sounder system provides an excellent perfor-
mance and combines long ranges with high resolution.
All LAZ 5100 navigation echo sounders and transducers are developed and
manufactures at L-3 ELAC Nautik's factory in Kiel (Germany) and have to pass
Navigation Echo Sounder LAZ 5100
Reliable Depth Information for Safe Navigation
System Overview
Sophisticated and Approved
The LAZ 5100 is the latest navigation echo sounder of L-3 ELAC Nautik, available as single-
or dual-frequency unit. Various transducers with frequencies from 24 kHz to 200 kHz can be
operated and the maximum measuring range is 2,000 m.
DISCOVER THE UNKNOWN
Key Features
Meets IMO requirements
Single or dual frequency version
Interfaces to ship navigation system
24 hours data storage for depth, position,
date and time
Menu guided operation
Mute control for acoustic alarms
Large variety of transducers can be
operated
Automatic and reliable operation in
shallow and deep water
an extensive quality control process. This 100% quali-
ty control ensures that the delivered components are
without any defects and the echo sounder system will
operate at maximum performance.
All you need to interface the LAZ 5100 with your ship
Transducer LSE 297
Optional slave display DAZ 25
Navigation Echo Sounder LAZ 5100
2 3
General
The water depth below a vessel is one of the most im-
portant information for safe navigation. The LAZ 5100
navigation echo sounder guarantees a reliable detec-
tion of the sea bottom in shallow as well as in deep
water and is designed for an automatic and smooth
operation. It meets the requirements of IMO for navi-
gation equipment and is type approved by BSH, USCG
and CCS.
Best selling navigation aid
Until today already more than 6,500 units have been
sold. The LAZ 5100 is suitable for vessels of all sizes
and can be used both for new buildings and moderniza-
tion projects. It can operate a variety of transducers both of L-3 ELAC Nautik and
other manufacturers, thus it is qualified for an easy modernization and repair of
navigation echo sounder systems.
Improved design
The electronic unit can operate 8 different frequencies and a menu controlled
transducer and performance setting allows an easy set-up of the echo sounder
system. The large 10.4” high resolution display shows detailed depth informa-
tion. The water depth is presented as a colored echogram to show the trend of
the water depth below to vessel. In addition the current water depth is displayed
digitally together with information about the ship's position, date and time. The
display can be dimmed in 9 steps for a non-dazzling readout during twilight and
night.
Reliable operation
The menu guided operation with direct access to all functions enables the ope-
rator to set-up the echo sounder system to his requirements. Automatic gain
control and TVG give reliable bottom detection both in shallow and deep water
without additional actions of the user. An internal memory of 24 hours stores the
depth, position, date and time.
Easy interfacing
All required input and output interfaces are available to integrate the LAZ 5100
into the ship's navigation system. NMEA inputs and outputs, VGA and a cen-
tronics interface are provided to connect peripheral devices, like digital slave
displays and printers.
Transducers
L-3 ELAC Nautik has developed special transducers for the operation with the
LAZ 5100. Together with the transducer LSE 297 (50 kHz), LSE 329 (100 kHz)
and LSE 313 (200 kHz) the echo sounder system provides an excellent perfor-
mance and combines long ranges with high resolution.
All LAZ 5100 navigation echo sounders and transducers are developed and
manufactures at L-3 ELAC Nautik's factory in Kiel (Germany) and have to pass
Navigation Echo Sounder LAZ 5100
Reliable Depth Information for Safe Navigation
System Overview
Sophisticated and Approved
The LAZ 5100 is the latest navigation echo sounder of L-3 ELAC Nautik, available as single-
or dual-frequency unit. Various transducers with frequencies from 24 kHz to 200 kHz can be
operated and the maximum measuring range is 2,000 m.
DISCOVER THE UNKNOWN
Key Features
Meets IMO requirements
Single or dual frequency version
Interfaces to ship navigation system
24 hours data storage for depth, position,
date and time
Menu guided operation
Mute control for acoustic alarms
Large variety of transducers can be
operated
Automatic and reliable operation in
shallow and deep water
an extensive quality control process. This 100% quali-
ty control ensures that the delivered components are
without any defects and the echo sounder system will
operate at maximum performance.
All you need to interface the LAZ 5100 with your ship
Transducer LSE 297
Optional slave display DAZ 25
Navigation Echo Sounder LAZ 5100
Reliable Depth Information for Safe Navigation
4
Specifications and Technical Data
LAZ 5100 at a Glance
L-3 Communications ELAC Nautik GmbH |Neufeldtstrasse 10 |24118 Kiel |Germany |Tel. +49 (0)431-883 0 |Fax +49 (0)431-883 496
DISCOVER THE UNKNOWN
Dimensions
Weight 6.1 kg
Dimensions 288 (height) x 336 (width) x 150 (depth) mm
Technical Data
Frequencies 24 / 28 / 30 / 33 / 38 / 50 / 100 / 200 kHz
Single or dual frequency; compatible
with a variety of existing transducers
Transducer impedance 50-150 Ω
Display of data 10.4" graphic TFT color display;
selection of display layout; night or
day display mode; optional printer
Basic scale ranges 0-10 / 20 / 50 / 200 / 500 or 2,000 m
Units Meters, fathom, feet selectable
Measuring accuracy Better than ±1% of depth reading
Minimum sounding depth approx. 0.5 m (below transducer)
Trim correction 5 m
Draft correction Up to 29.9 m
Output power Adjustable, max. 1,000 W RMS
(depending on transducer installed
and range selected)
Pulse repetition rate max. 180 pulses per minute
Gain control TVG, automatic and manual gain
control for bottom finding
Special features Recording of time and date (internally
generated); data output (depth values
etc.), time and date; indication of po-
sition if externally available; Operator
Fitness Check (OFC); mute control for
acoustic alarm
Interfaces Output: DPT according to NMEA 0183
and DIN EN 61162-1
Input: NAV data according to NMEA
0183 and DIN EN 61162-1
Environmental conditions According to EN 60 945
Operating temperature -15° to +55° C
Protection code IP 53
Power supply 90-260 V AC, 50-60 Hz
Optionally 10-30 V DC
Supply voltage monitoring
Power consumption approx. 35 W
IMO compliant
BSH BSH / 4612 / 4061453 / 09
USCG 165.107 / 6 / 1
CCS HB07Q00001_01
Data displayed in dual frequency mode (above) and single fre-
quency mode (using one of the system's various color options)
Other ELAC Marine Equipment manuals
