ElderSens DiaperSens User manual
Table of Contents
Safety Messages
Preface..........................................................................3
Notice............................................................................4
Safety.............................................................................5
Infant vs.Adult Usage................................................6
Product Information
Product Contents.......................................................7
Product Description..................................................7
Technical Specifications...........................................8
Product Diagram ................................................9-10
How To Use
Operation Instructions......................................11-18
Frequently Asked Questions................................19
2
3
Notice
This product is meant for the elderly,
infants, and adults who are unable to fully
take care of themselves.
This product is recommended for indoor
use only.
The main purpose of this product is for
remote monitoring of the user’s condition.
The sensor is not a substitute for treatment or
healthcare.
4
Safety
Secure the sensor firmly to prevent
accidental swallowing by children
Do not tamper or modify the sensor in any
way.
Do not use the sensor with MRI or CAT
scanners
No replacement/serviceable parts are
provided with the sensor, the user may
replace the battery with CR2025 button
batteries
Keep the sensor in room temperature
conditions, avoid prolonged exposure to high
temperatures. Avoid prolonged
5
contact with water during cleaning to
prevent sensor inaccuracy.
DiaperSens for Infants
Use adhesive to attach the sensor onto the
diaper for infants
DiaperSens for Adults
Carefully pierce the hook into the diaper,
then use the adhesive to secure the sensor.
6
Product Contents
ƽOne DiaperSens sensor
ƽ10 DiaperSens adhesives (Please search for
DiaperSens Adhesive Refill on Amazon to
purchase additional adhesives)
ƽOne product manual
Product Description
DiaperSens is a smart diaper product for
wet diaper detection. The product includes a
reusable electronic sensor device and an
application. The sensor is attached to the
outside of diaper and is paired with a
smartphone. When diaper is wet, the sensor
sends a signal to the phone.
7
8
Technical Specifications
ƽTransmission Range: Approximately 10
meters, open rooms work better
ƽTemperature/Humidity Accuracy: 0.4ʧ/3%
RH (Relative Humidity)
ƽBattery: CR2025 3V 150mA
ƽOperating Platform Requirements:
(phones/tablets): Android: Android 4.3, iOS:
iOS 7.0+
Product Diagram
Sensor
Hook
LED2
On/Off
switch
LED1
9
DiaperSens Adhesive
10
Operation Instructions
1澝On/Off
a. T
urn On: Hold the on/off switch for 2
seconds until LED 2 turns green
b. T
urn Off: Hold the on/off switch for 2
seconds until LED 1 turns red
2澝Attaching Sensor to Diaper
a. For Infants: Stick the sensor onto the
DiaperSens Adhesive, then stick the sensor
onto outside of diaper.
b. For Adults: Use the hook to make an
incision on outside of diaper, then insert
the hook into the incision. Use the
DiaperSens Adhesive to secure the sensor
on the diaper.
c. Attaching Location: As shown in the
11
figure, the sensor is attached at lower front
side of the diaper.
d. Video Instructions: Please visit our
website www.eldersens.com and watch the
DiaperSens tutorial video.
12
CONNECT
DlAPERSENS MONlTOR
R H
C
-
-
O
3澝Bluetooth Pairing
a. Download the DiaperSens application
on the Google Play or Apple App Store
b. Enter the DiaperSens application on
your device
c. Ensure that Bluetooth is turned on for
your device
d. Press the CONNECT button shown as in
the picture.
13
e. After connecting successfully, nearby
devices and connection strength will be
shown as in the picture.
f. Select a sensor to see information
14
about the sensor’s battery percentage,
current temperature, and relative humidity
(RH). A cellphone can only pair one sensor
at a time.
g. Once the RH is above 80, the app will
notify the user to change the diaper with
an alarm.
h. Please visit our website
www.eldersens.com and watch the
DiaperSens tutorial video for how to
download and use the app.
4澝Cleaning
a. It is recommended to clean the sensor
lightly with rubbing alcohol after each use.
b. Replace the DiaperSens adhesive with a
new one every time for best results.
15
5澝Battery Replacement
a. Replace the battery after about 2
years of inactivity or 2 months of use.
b. Use a fingernail or a small flathead
screwdriver to pry the back cover off.
Open From
here
put the battery
in here
16
c. Remove the old CR2025 battery.
Replace it with a new CR2025 battery with
positive facing up.
d. Press the back cover back on.
17
Frequently Asked
Questions
Q: Why did the sensor disconnect from my
phone?
A: The Bluetooth BLE protocol has limitations
on the amount of obstructions in the
operating environment. Please make sure the
operating environment is unobstructed as
possible.
Q: Where can I purchase more DiaperSens
adhesives once I run out?
A:Please search for DiaperSens Adhesive
18
Refill on Amazon to purchase additional
adhesives. You can also follow the following
link to find DiaperSens adhesives on Amazon:
https://www.amazon.com/DiaperSensAdhesiv
eRefill/dp/B07CS1TTVW/ref=sr_1_1_a_it?ie=UT
F8&qid=1525673658&sr=81&keywords=Diap
erSens&dpID=41Tncx1zxVL&preST=_SY300_Q
L70_&dpSrc=srch
19
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC IDϸ2APRI-DS001
20
Table of contents
