Electric Radiators Direct Haverland RC Wave User instructions

Programming your Haverland RC Wave
Setting the temperature for each mode.
Set Comfort mode to the desired temperature using + -
This is the mode to use when you need warmer heating e.g. morning and evening.
Recommended setting 18-21C
Then press the door icon to move to the next mode.
Set the economy mode to the desired temperature using + -
This is the mode to use when you don’t require as much heating e.g. afternoon or night.
Recommended setting 14-18C
Then press the door icon to move to the next mode.
Set the frost mode to the desired temperature using + -
This is the mode to use when you don’t require heating at all.
Press the door icon again to exit.
Setting the date/time
To enter the programming mode, hold the standby button until the screen changes (5-10secs)
Press the standby button again once.
The time will appear with numbers on the right hand side which will flash 1-7 (each number
represents a day. i.e. 1 is Monday, 2 Tuesday etc.) Set to the correct day using + -
Press the door icon to set the hour with +-
Press the door icon again to set the minutes with +-
Press the door icon to exit.

Programming your radiator schedule
To enter the programming mode, hold the standby button until the screen changes (5-10secs)
It’ll start on 00:00 on Monday (1 on the right side)
Select economy mode by using +
Press the door icon to go through the hours until you get to the hour which you require the heating
to go on (e.g. 6/7am)
Press + to set to then go through the hours (using the door icon) until when you don’t require
heating. (e.g. 9/10am)
Press + to set to or until you require heating again (e.g 5/6pm)
Press + to set to then go through the hours (using the door icon) until when you don’t require
heating. (e.g. 10/11pm)
Then continue the steps for day 2-7 and press standby to finish.
Your radiator should now be fully programmed.
If you require assistance please ask for a member of the customer support team on 0330 300 4444.