Electro-Voice ETX-10P User manual

ETX Powered Loudspeakers
ETX-10P, ETX-12P, ETX-15P, ETX-35P, ETX-15SP, and ETX-18SP
en | User Manual

Table of contents
1Safety 4
2Description 7
2.1 Quick setup 7
2.2 System features 8
3System overview 10
3.1 Technical specifications 10
3.2 Dimension drawings 12
3.3 Frequency response graphs 14
4Operation 17
4.1 Tripod and floor monitor operation 17
4.2 Suspension 21
4.3 Amplifier DSP controls 25
4.4 System status 27
4.5 DSP controls 28
4.5.1 Full-Range loudspeaker DSP control menu 29
4.5.2 Subwoofer DSP control menu 32
4.6 Recommended configurations 36
4.6.1 Daisy-chaining full-range systems 36
4.6.2 Using full-range systems as monitors 37
4.6.3 Stacking full-range systems with subwoofers 38
4.6.4 Subwoofer cardioid array 39
4.7 Removing the subwoofer caster wheels 41
5Troubleshooting 42
en 3
Electro-Voice User Manual 2014.02 | 03 | F.01U.276.083

Safety
Important Safety instructions:
!
The lightening flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of
uninsulated “dangerous voltage” within the
product’s enclosure that may be sufficient
magnitude to constitute a risk of electric
shock to persons.
WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
OVEREXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
AVIS: RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR.
!
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: CONNECT ONLY TO MAINS
SOCKET WITH PROTECTIVE EARTHING
CONNECTION.
The asterisk within an equilateral triangle is
intended to inform the user to necessary
installation or removal instructions
regarding equipment or hardware use
relating to the system.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
14. To completely disconnect AC power from this apparatus, the power supply cord must be
unplugged.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled
with liquids, such as vases, are placed on this apparatus.
16. The AC plug of the power supply cord shall remain readily operable.
1
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083 User Manual Electro-Voice

Management of WEEE (Waste Electrical and Electronic Equipment) (applicable in
Member States of the European Union and other European countries with individual
national polices on the management of WEEE). The symbol on the product or on its
packaging indicates that this product may not be treated as regular household waste,
but has to be disposed through returning it at an Electro-Voice dealer.
FCC information
IMPORTANT: Do not modify this unit! Changes or modifications not expressly approved by the
manufacturer could void the user’s authority, granted by the FCC, to operate the equipment.
Notice!
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
▪Reorient or relocate the receiving antenna.
▪Increase the separation between the equipment and receiver.
▪Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
▪Consult the dealer or an experienced radio/TV technician.
Precautions
!
If an Electro-Voice loudspeaker is used outdoors on a sunny day, place the
loudspeaker in a shaded or covered area. The loudspeaker amplifiers have
protection circuits that temporarily shut the loudspeaker off when extremely
high temperatures are reached. This can happen on hot days when the
loudspeaker is in direct sunlight.
!
Do not use Electro-Voice loudspeakers in an environment where temperatures
are below 0°C (32°F) or exceed +40°C (104°F).
!
Never expose an Electro-Voice loudspeaker to rain, water, or high moisture.
!
Electro-Voice loudspeakers are easily capable of generating sound pressure
levels sufficient to cause permanent hearing damage to anyone within normal
coverage distance. Caution should be taken to avoid prolonged exposure to
sound pressure levels exceeding 90 dB.
en 5
Electro-Voice User Manual 2014.02 | 03 | F.01U.276.083

Suspension
!
Warning!
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of suspending objects
overhead. Electro-Voice strongly recommends all loudspeakers be suspended taking into
account all current national, federal, state, and local regulations. It is the responsibility of the
installer to ensure all loudspeakers are safely installed in accordance with all such
regulations. When loudspeakers are suspended, Electro-Voice strongly recommends the
system be inspected at least once a year. If any sign of weakness or damage is detected,
remedial action should be taken immediately. The user is responsible for making sure the wall
or ceiling is capable of supporting the loudspeaker. Any hardware used to suspend a
loudspeaker not associated with Electro-Voice is the responsibility of others.
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083 User Manual Electro-Voice

Description
Thank you for choosing an Electro-Voice powered loudspeaker system. Please take time to
consult the manual to understand all the features built into your EV system and fully utilize its
performance capabilities.
The ETX Powered Loudspeakers are a high-end wood loudspeaker family; consisting of the
ETX-10P, ETX-12P, ETX-15P, ETX-35P, ETX-15SP, and ETX-18SP. Features professional fit and
finish, durable, high power systems offers easy portability. The integrated LCD screen allows
access to multiple DSP (Digital Signal Processing) settings and system status. ETX Powered
Loudspeakers offer the best-in class sound through design, innovation, amplification, and DSP
inspired by EV’s legendary engineering team.
Quick setup
The ETX Powered Loudspeakers from Electro-Voice are fully integrated audio systems with
carefully matched electronics and transducers. These products make it easy to set up a high
quality system quickly with a minimum amount of cables and external electronics.
Full-Range loudspeaker
Models: ETX-10P, ETX-12P, ETX-15P, and ETX-35P
To set up a full-range loudspeaker, do the following:
Step Illustration
1. Connect the AC power cord from a
grounded line receptacle to the MAINS IN.
2. Connect the XLR or TRS cable from an
audio source to INPUT 1 or INPUT 2.
3. Adjust the input gain to (infinity).
4. Switch POWER to ON.
5. From the DSP home screen, increase the
input gain to the desired sound output.
6. Adjust the MASTER VOL knob to the
desired volume.
2
2.1
en 7
Electro-Voice User Manual 2014.02 | 03 | F.01U.276.083

Subwoofer
Models: ETX-15SP and ETX-18SP
To set up a subwoofer, do the following:
Step Illustration
1. Connect the AC power cord from a
grounded line receptacle to the MAINS IN.
2. Connect the XLR or TRS cable from an
audio source to INPUT 1 or INPUT 2.
3. Switch POWER to ON.
4. Adjust the MASTER VOL knob to the
desired volume.
System features
ETX Powered Loudspeakers from Electro-Voice build upon the legacy and heritage of EV, to
deliver the most advanced powered loudspeaker products for portable and permanent
applications. The output, response and coverage pattern of EV transducers are all optimized
via the breakthrough design approach known as SST (Signal Synchronized Transducers),
combined with state-of-the-art on-board DSP which is accessed via an easy-to-use single-knob
interface. EV designed and manufactured transducers include SMX woofer technology using
composite cone materials, flux stabilizing rings, and thermal management. This transducer
yields lower distortion, smooth response and high SPL. The high-efficiency DH3-B
compression driver has a convex diaphragm driving a coherent phase device extending
frequency response to 20 kHz. The ETX Powered Loudspeaker family features three (3) two-
way loudspeakers (10-inch, 12-inch and 15-inch with a 1.5-inch titanium compression driver),
a single three-way loudspeaker, and subwoofers with 15-inch and 18-inch drivers. ETX
Powered Loudspeakers combine EV-engineered intelligent DSP, high-powered amplifiers and
high-efficiency transducers to deliver that legendary EV sound and performance.
ETX-10P—10-inch two-way powered loudspeaker system
▪2000 W amplifier and 134 dB peak SPL
▪Single-knob DSP includes presets for multiple configurations and top+sub combinations
(performance style, locations, and space)
▪Loudspeaker system performance monitoring via integrated LCD and front panel LED
▪SST design assures precise and consistent coverage
▪Designed for floor, stacked, or tilt pole mount (0 or 7.5 degrees) for portable or
permanent installation (Eight (8) M10 threaded suspension points)
2.2
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083 User Manual Electro-Voice

ETX-12P—12-inch two-way powered loudspeaker system
▪2000 W amplifier and 135 dB peak SPL
▪Single-knob DSP includes presets for multiple configurations and top+sub combinations
(performance style, locations, and space)
▪Loudspeaker system performance monitoring via integrated LCD and front panel LED
▪SST design assures precise and consistent coverage
▪Designed for floor, stacked, or tilt pole mount (0 or 7.5 degrees) for portable or
permanent installation (Eight (8) M10 threaded suspension points)
ETX-15P—15-inch two-way powered loudspeaker system
▪2000 W amplifier and 135 dB peak SPL
▪Single-knob DSP includes presets for multiple configurations and top+sub combinations
(performance style, locations, and space)
▪Loudspeaker system performance monitoring via integrated LCD and front panel LED
▪SST design assures precise and consistent coverage
▪Designed for floor, stacked, or tilt pole mount (0 or 7.5 degrees) for portable or
permanent installation (Eight (8) M10 threaded suspension points)
ETX-35P—15-inch three-way powered loudspeaker system
▪2000 W amplifier and 136 dB peak SPL
▪Single-knob DSP includes presets for multiple configurations and top+sub combinations
(performance style, locations, and space)
▪Loudspeaker system performance monitoring via integrated LCD and front panel LED
▪Features three high-sensitivity transducers, for high output sound which is optimized for
precise coverage and low distortion
▪Designed for floor, stacked, or a combo pole cup (insert and threaded) for portable or
permanent installation (Eight (8) M10 threaded suspension points)
ETX-15SP—15-inch powered subwoofer loudspeaker system
▪1800 W amplifier and 134 dB peak SPL
▪Single-knob DSP includes presets for multiple configurations and top+sub combinations
(performance style, locations, and space)
▪Loudspeaker system performance monitoring via integrated LCD and front panel LED
▪Includes DSP preset for true cardioid performance
▪Enclosure includes removable casters and a combo pole cup (insert and threaded) for
use with the two-way models
ETX-18SP—18-inch powered subwoofer loudspeaker system
▪1800 W amplifier and 135 dB peak
▪Single-knob DSP includes presets for multiple configurations and top+sub combinations
(performance style, locations, and space)
▪Loudspeaker system performance monitoring via integrated LCD and front panel LED
▪Includes DSP preset for true cardioid performance
▪Enclosure includes removable casters and a combo pole cup (insert and threaded) for
use with the two-way models
en 9
Electro-Voice User Manual 2014.02 | 03 | F.01U.276.083

System overview
Technical specifications
ETX-10P, ETX-12P, and ETX-15P
ETX-10P ETX-12P ETX-15P
Frequency Response (-3 dB): 85 Hz – 20 kHz155 Hz – 20 kHz148 Hz – 20 kHz1
Frequency Range (-10 dB): 65 Hz – 20 kHz143 Hz – 20 kHz140 Hz – 20 kHz1
Maximum SPL: 134 dB peak2135 dB peak2135 dB peak2
Coverage (H x V): 90° x 60°
Power Rating: 2000 W
LF Transducer: SMX2100 254 mm
(10 in)
SMX2120 300
mm (12 in)
SMX2150 380 mm
(15 in)
HF Transducer: DH3-B 1.25-in titanium compression driver
Crossover Frequency: 1700 Hz 1600 Hz 1500 Hz
Connectors: (2) XLR/TRS combo jack and (1) XLR link output
Enclosure: 18 mm, 13-ply birch plywood with EVCoat
Grille: 16AWG steel with powdercoat
Suspension: (8) M10 suspension points
Dimensions (H x W x D): 526 mm x 330 mm
x 365 mm (21 in x
13 in x 14 in)
613 mm x 381
mm x 400 mm
(24 in x 15 in x
16 in)
691 mm x 431 mm
x 447 mm (27 in x
17 in x 18 in)
Net Weight: 20.3 kg (44.8 lb) 23.6 kg (52.0 lb) 27.7 kg (61.1 lb)
Shipping Weight: 22.9 kg (50.5 lb) 26.8 kg (59.1 lb) 31.5 kg (69.5 lb)
Power Consumption: 100 – 240 V~, 50 – 60 Hz, 1.6 – 0.8 A3
1. Full space measurement using the music DSP preset.
2. Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
3. Current rating is 1/8 power.
3
3.1
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083 User Manual Electro-Voice

ETX-35P
ETX-35P
Frequency Response (-3 dB): 48 Hz – 20 kHz1
Frequency Range (-10 dB): 38 Hz – 20 kHz1
Maximum SPL: 136 dB peak2
Coverage (H x V): 60° x 40°
Power Rating: 2000 W
LF Transducer: SMX2151 380 mm (15 in)
MB Transducer: EVS-6C 6.5-in mid-bass driver
HF Transducer: DH3-B 1.25-in titanium compression driver
Crossover Frequency: 700 Hz, 2900 Hz
Connectors: (2) XLR/TRS combo jack and (1) XLR link output
Enclosure: 18 mm, 13-ply birch plywood with EVCoat
Grille: 16AWG steel with powdercoat
Suspension: (8) M10 suspension points
Dimensions (H x W x D): 1023 mm x 469 mm x 426 mm (40 in x 18 in x 17 in)
Net Weight: 38.2 kg (84.2 lb)
Shipping Weight: 42.8 kg (94.4 lb)
Power Consumption: 100 – 240 V~, 50 – 60 Hz, 1.6 – 0.8 A3
1. Full space measurement using the music DSP preset.
2. Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
3. Current rating is 1/8 power.
en 11
Electro-Voice User Manual 2014.02 | 03 | F.01U.276.083

ETX-15SP and ETX-18SP
ETX-15SP ETX-18SP
Frequency Response (-3 dB): 37 Hz – 150 Hz133 Hz – 150 Hz1
Frequency Range (-10 dB): 32 Hz – 180 Hz128 Hz – 180 Hz1
Maximum SPL: 134 dB peak2135 dB peak2
Power Rating: 1800 W
LF Transducer: DVX3159A 380 mm (15 in) DVX3180A 457 mm (18 in)
Low Pass Frequency: Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz
Connectors: (2) XLR/TRS Combo Jack and (2) XLR link Output
Enclosure: 18 mm, 13-ply birch plywood with EVCoat
Grille: 16AWG steel with powdercoat
Dimensions (H x W x D): 471 mm x 576 mm x 825 mm
(19 in x 23 in x 32 in)
550 mm x 675 mm x 910 mm
(22 in x 27 in x 36 in)
Dimensions (H x W x D):
without casters
471 mm x 576 mm x 692 mm
(19 in x 23 in x 27 in)
550 mm x 675 mm x 777 mm
(22 in x 27 in x 31 in)
Net Weight: 41.7 kg (91.9 lb) 51.8 kg (114.2 lb)
Shipping Weight: 46.8 kg (103.2 lb) 58.9 kg (129.9 lb)
Power Consumption: 100 – 240 V~, 50 – 60 Hz, 1.6 – 0.8 A3
1. Half space measurement using the music DSP preset and 150 Hz low pass.
2. Maximum SPL is measured at 1 m using broadband pink noise at maximum amplifier
output.
3. Current rating is 1/8 power.
Dimension drawings
330 mm
[13 in]
40°
526 mm
[21 in]
236 mm
[9 in]
191 mm
[8 in]
166 mm
[7 in]
261 mm
[10 in]
365 mm
[14 in]
137 mm
[5 in]
Left View Front View Right View
Figure 3.1: ETX-10P dimension drawing
3.2
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083 User Manual Electro-Voice

40°
613 mm
[24 in]
381 mm
[15 in]
304 mm
[12 in]
225 mm
[9 in]
166 mm
[7 in]
400 mm
[16 in]
236 mm
[9 in]
159 mm
[6 in]
Figure 3.2: ETX-12P dimension drawing
40°
431 mm
[17 in]
691 mm
[27 in]
224 mm
[9 in]
342 mm
[13 in]
236 mm
[9 in ]
447 mm
[18 in]
161 mm
[6 in]
Bottom View
166 mm
[7 in ]
Figure 3.3: ETX-15P dimension drawing
75° 75°
Bottom View
Right ViewFront View
Left View
469 mm
[18 in]
1023mm
[40 in] 236 mm
[9 in]
182 mm
[7 in]
166 mm
[7 in]
508 mm
[20 in]
213 mm
[8 in]
426 mm
[17 in]
Figure 3.4: ETX-35P dimension drawing
en 13
Electro-Voice User Manual 2014.02 | 03 | F.01U.276.083

471 mm
[19 in]
576 mm
[23 in]
236 mm
[9 in]
333 mm
[13 in]
166 mm
[7 in]
232 mm
[9 in ]
351 mm
[14 in]
692 mm
[27 in]
825 mm
[32 in]
Left View Right ViewFront View Top View
Figure 3.5: ETX-15SP dimension drawing
550 mm
[22 in]
675 mm
[27 in]
236 mm
[9 in]
166 mm
[7 in]
368 mm
[14 in]
271mm
[11 in]
351 mm
[14 in]
777 mm
[31 in]
910 mm
[36 in]
Figure 3.6: ETX-18SP dimension drawing
Frequency response graphs
Figure 3.7: ETX-10P frequency response graph: speech, live, and music modes
3.3
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083 User Manual Electro-Voice

Figure 3.8: ETX-12P frequency response graph: speech, live, and music modes
Figure 3.9: ETX-15P frequency response graph: speech, live, and music modes
Figure 3.10: ETX-35P frequency response graph: speech, live, and music modes
en 15
Electro-Voice User Manual 2014.02 | 03 | F.01U.276.083

Figure 3.11: ETX-15SP frequency response graph: live and music modes
Figure 3.12: ETX-18SP frequency response graph: live and music modes
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083 User Manual Electro-Voice

Operation
Tripod and floor monitor operation
Multi-angle pole cup
The multi-angle pole cup is used to position the ETX-10P, ETX-12P and ETX-15P loudspeakers
for optimal sound coverage. The multi-angle pole cup has two (2) positions 0° and 7.5°. The 0°
position points the sound horizontally straight towards the audience. The 7.5° position points
the sound at an angle towards the audience and is used when the loudspeaker is above the
audience.
0° 7.5°
Figure 4.1: Optimal coverage multi-angle pole cup 0° (left) and multi-angle pole cup 7.5° (right)
Combo pole cup
ETX-35P, ETX-15SP, and ETX-18SP subwoofers use a M20 threaded and 35 mm (1 3/8 in)
combination cup to be compatible with both types of poles. M20 threaded poles provide a
more secure connection to the subwoofer than the standard 35 mm (1 3/8 in) pole. If using an
M20 threaded pole with the ETX-35P, always place the threads into the subwoofer.
4
4.1
en 17
Electro-Voice User Manual 2014.02 | 03 | F.01U.276.083

Tripod or pole mount
ETX-10P, ETX-12P, and ETX-15P loudspeakers mount on a tripod stand or on a pole above a
subwoofer.
Mounting a loudspeaker on a tripod stand
Figure 4.2: Full-Range models on tripod stand
!
Caution!
Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the tripod
stand to be certain it is capable of supporting the weight of the loudspeaker.
!
Caution!
Two (2) person lift and placement is recommended for the heavier loudspeakers. Single
person lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a tripod stand, do the following:
1. Place the tripod stand on a level stable surface.
▪Fully extend the legs on the tripod stand.
▪Do not compromise the tripod stands structural integrity by trying to make the stand
taller.
▪Do not attempt to suspend more than one (1) loudspeaker on a stand designed for a
single loudspeaker.
2. Using two (2) hands lift the loudspeaker.
3. Set the multi-angle pole cup located on the bottom of the loudspeaker onto the pole.
Figure 4.3: Multi-angle pole cup 0° (left) and multi-angle pole cup 7.5° (right)
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083 User Manual Electro-Voice

Mounting a loudspeaker on a pole
Figure 4.4: Full-Range/sub stack with pole mount
!
Caution!
Two (2) person lift and placement is recommended for the heavier loudspeakers. Single
person lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker above a subwoofer on a pole, do the following:
1. Place the subwoofer on a level stable surface.
2. Insert the M20 threaded pole into the combo pole cup on the top of the subwoofer.
Turn the pole
clockwise
3. Turn the M20 threaded pole clockwise to secure the pole to the subwoofer.
4. Using two (2) hands lift the loudspeaker.
5. Set the multi-angle pole cup located on the bottom of the loudspeaker onto the pole.
en 19
Electro-Voice User Manual 2014.02 | 03 | F.01U.276.083

Figure 4.5: Multi-angle pole cup 0° (left) and multi-angle pole cup 7.5° (right)
Floor monitor
ETX-10P, ETX-12P, and ETX-15P loudspeakers may be used as a floor monitor by placing the
speaker on the integral monitor angle.
To set up a loudspeaker as a floor monitor, do the following:
1. Place the loudspeaker on a level stable surface.
2. Safely route cables to prevent injury to performers, production crew, and audience
members.
Notice!
Secure cables with wire ties or tape whenever possible.
Front View
60º
OPTIMAL
COVERAGE
90º
OPTIMAL
COVERAGE
40º
MONITOR
ANGLE
Figure 4.6: Optimum coverage in monitor position
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083 User Manual Electro-Voice