Electrolux ESL 68040 User manual

user manual
ESL 68040
dishwasher
117991 41/0en 20-12-2006 14:37 Pagina 1

We were thinking of you
when we made this product
117991 41/0en 20-12-2006 14:37 Pagina 2

welcome to the world of Electrolux electrolux 3
Thank you for choosing a first class product from Electrolux, which
hopefully will provide you with lots of pleasure in the future. The
Electrolux ambition is to offer a wide variety of quality products
that make your life more comfortable. You find some examples on
the cover in this manual. Please take a few minutes to study this
manual so that you can take advantage of the benefits of your new
machine. We promise that it will provide a superior User
Experience delivering Ease-of-Mind. Good luck!
Welcome to the world of Electrolux
117991 41/0en 20-12-2006 14:37 Pagina 3

Safety information 5
Product description 7
Control panel 8
Display 11
First use 12
Daily use 17
Washing programmes 28
Care and cleaning 30
Something not working 32
Technical data 35
Hints for test institutes 37
Installation 38
Environment concerns 42
Guarantee/Customer Service 43
Contents
The following symbols are used in this manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
General information and tips
Environmental information
4electrolux contents
117991 41/0en 20-12-2006 14:37 Pagina 4

safety information electrolux 5
In the interest of your safety and to
ensure the correct use, before
installing and first using the
appliance, read this user manual
carefully, including its hints and
warnings. To avoid unnecessary
mistakes and accidents, it is
important to ensure that all people
using the appliance are thoroughly
familiar with its operation and
safety features. Save these
instructions and make sure that
they remain with the appliance if it
is moved or sold, so that everyone
using it through its life will be
properly informed on appliance use
and safety.
Correct use
●This dishwasher is only intended
for washing household utensils
suitable for machine washing.
●Do not put any solvents in the
dishwasher. This could cause an
explosion.
●Knives and other items with sharp
points must be loaded in the
cutlery basket with their points
down or placed in a horizontal
position in the upper basket.
●Only use products (detergent, salt
and rinse aid) suitable for
dishwashers.
●Avoid opening the door whilst the
appliance is in operation, hot
steam may escape.
●Do not take any dishes out of the
dishwasher before the end of the
dishwashing cycle.
Safety information
●After use, isolate the appliance
from the power supply and turn off
the water supply.
●This product should be serviced
only by an authorised service
engineer, and only genuine spare
parts should be used.
●Under no circumstances should
you attempt to repair the machine
yourself. Repairs carried out by
inexperienced persons will cause
injury or serious malfunctioning.
Contact your local Service Force
Centre. Always insist on genuine
spare parts.
General safety
●Dishwasher detergents can cause
chemical burns to eyes, mouth and
throat. Could endanger life!
Comply with the safety instructions
of the dishwasher detergent
manufacturer.
●The water in your dishwasher is
not for drinking. Detergent
residues may still be present in
your machine.
●Ensure that the door of the
dishwasher is always closed when
it is not being loaded or unloaded.
In this way you will avoid anybody
tripping over the open door and
hurting themselves.
●Do not sit or stand on the open
door.
Child safety
●This appliance is designed to be
operated by adults. Don’t allow
children to use the dishwasher
unsupervised.
117991 41/0en 20-12-2006 14:37 Pagina 5

6electrolux safety information
For electrical and water connection
carefully follow the instructions
given in specific paragraphs.
●Keep all packaging well away from
children. There is risk of
suffocation.
●Keep all detergents in a safe place
out of children’s reach.
●Keep children well away from the
dishwasher when the door is open.
Installation
●Check your dishwasher for any
transport damage. Never connect
a damaged machine. If your
dishwasher is damaged contact
your supplier.
●All packaging must be removed
before use.
●Any electrical and plumbing work
required to install this appliance
must be carried out by a qualified
and competent person.
●For safety reasons it is dangerous
to alter the specifications or
attempt to modify this product in
any way.
●Never use the dishwasher if the
electrical supply cable and water
hoses are damaged; or if the
control panel, work top or plinth
area are damaged such that the
inside of the appliance is freely
accessible. Contact your local
Service Force centre, in order to
avoid hazard.
●All sides of the dishwasher must
never be drilled to prevent damage
to hydraulic and electric
components.
117991 41/0en 20-12-2006 14:37 Pagina 6

product description electrolux 7
Product description
Upper basket
Water hardness dial
Salt container
Detergent dispenser
Rinse aid dispenser
Rating plate
Filters
Lower spray arm
Upper spray arm
1
2
3
4
5
6
7
8
9
This dishwasher has an internal
light that turns on and off when
the opening and closing of the
dishwasher’s door occurs.
Internal light equipped with led
lamp CLASS 1 in accordance with
EN 60825-1: 1994 + A1:2002 +
A2:2001
In case that this light has to be
replaced, please contact your local
Service Force Centre.
117991 41/0en 20-12-2006 14:37 Pagina 7

8electrolux control panel
Control panel
On/Off button
«Up and down» scrolling
buttons (+ -)
Display
«OK» button
«Option» button
1
2
3
4
5
A sequence of displayed messages
and audible signals will guide you
in the setting of the appliance and
the selection of a washing
programme and available options.
In this fully integrated appliance
the controls are located on the top
of the door. When operating with
the controls the door needs to be
open.
117991 41/0en 20-12-2006 14:37 Pagina 8

control panel electrolux 9
«OK» button
Is necessary to:
●confirm / memorize any option,
●start a washing programme.
«Up and down» scrolling buttons
(+ -)
These 2 buttons have a double
function:
●selecting within “programme
menu”,
●selecting within “option menu” and
“submenu”.
The «OK» and «Option» buttons if
pressed simultaneously can:
●cancel a washing programme in
progress,
●cancel the setting of an option.
It is also possible to return to the
factory setting for the following
options:
- LANGUAGE
- BRIGHTNESS (factory setting
level 10)
In setting mode press for about 6
seconds these 2 buttons
simultaneously; the default language
message will appear in the display.
«Option» button
press this button to enter a menu of
options; press again to exit from the
menu:
How to set the options
1. Press «Option» button.
2. Press one of the «up and down»
scrolling buttons until desired
option is displayed:
DELAY START
SETTINGS
3 IN 1
3. Press «OK» to confirm and enter
submenu.
4. Press «up and down» scrolling
buttons until required submenu is
displayed.
5. Press «OK» to confirm.
6. To exit from the menu press
«Option» button.
Switching on for the first time -
setting the language
1. Press «On/Off» button.
2. In the display appears the default
language message.
If you want to confirm the default
language press «OK».
3. If you want to set a different
language; use the «up and down»
scrolling buttons until the required
language appears in the display.
Press «OK» to confirm.
117991 41/0en 20-12-2006 14:37 Pagina 9

10 electrolux control panel
Option menu
DELAY
START
Option submenu
Allows the start of the washing programme to be delayed
from 1 hour up to 19 hours.
The countdown will decrease with steps of 1 hour. Only in
the last hour the decrease is in minutes.
Once the countdown has elapsed the washing programme
will start automatically.
SETTINGS
Allows you to view messages in the
required language.
LANGUAGE
SOUND VOLUME
Allows you to adjust the volume of the audible signals (from
0 to 5).
Level 0 means the deactivation of the audible signals and
the corresponding symbol appears in the display.
BRIGHTNESS Allows you to increase or decrease the
brightness of the background of the display,
10 different levels can be selected.
3 IN 1 Set the dishwasher for the use of conventional detergents or
combi detergent tablets (3 in 1 - 4 in 1 - 5 in 1 etc...). See «3
in 1 function»
function activated. Use combi detergent tablets.
The 3 in 1 symbol appears in the display.
ON
function deactivated. Use conventional detergents.
OFF
RINSE AID Allows you to activate or deactivate the
rinse aid dispenser. ON
OFF
activated
deactivated
WATER
HARDNESS Allows you to set electronically the water
softener.
117991 41/0en 20-12-2006 14:37 Pagina 10

display electrolux 11
Display
Symbols:
indicate the various options
Washing phases: during the progress of the
programme these little bars indicate the phase
of the washing programme: prewash - main
wash - rinses - drying
In this row several details are displayed:
-Setting mode: guide to the selection of the washing
programme - duration time of the programme, options (when
together with the washing programme one or more options
are set, the update of the programme duration will occur
automatically).
-Once the programme has started indicates the sequence
of the running phase and the running time of the programme
in progress.
The symbols have the following meaning:
Delay start: fixed in setting mode; flashing when countdown in progress
3 in 1: is illuminated when the function for the use of the “3 in 1” combi
detergents is active.
Sound volume: exclusion of the volume for audible signals.
117991 41/0en 20-12-2006 14:37 Pagina 11

12 electrolux first use
Before using your dishwasher for the
first time:
●Ensure that the electrical and
water connections comply with the
installation instructions
●Remove all packaging from inside
the appliance
●Set the water softener
●Pour 1 litre of water inside the salt
container and then fill with
dishwasher salt
●Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: "3 in 1", "4 in 1",
"5 in 1" etc... set the 3 in 1 function
(see "3 in 1 function").
First use
Set the water softener
The dishwasher is equipped with a
water softener designed to remove
minerals and salts from the water
supply, which would have a
detrimental or adverse effect on the
operation of the appliance.
The higher the content of these
minerals and salts, the harder your
water is.
Water hardness is measured in
equivalent scales, German degrees
(°dH), French degrees (°TH) and
mmol/l (millimol per litre - international
unit for the hardness of water).
The softener should be adjusted
according to the hardness of the
water in your area. Your local Water
Authority can advise you on the
hardness of the water in your area.
The water softener must be set in
both ways: manually, using the water
hardness dial and electronically, using
one of the «up and down» scrolling
buttons on the control panel
Setting manually
The dishwasher is factory set at
position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
3. Turn the water hardness dial to
position 1 or 2 (see table).
4. Replace the lower basket.
117991 41/0en 20-12-2006 14:37 Pagina 12

first use electrolux 13
*no salt is necessary
Water hardness
°dH °TH mmol/l manually electronically
Adjusting the water
hardness setting Use of salt
51 - 70 91 - 125 9.0 - 12.5 2 level 10 yes
43 - 50 76 - 90 7.6 - 8.9 2 level 9 yes
37 - 42 65 - 75 6.5 - 7.5 2 level 8 yes
29 - 36 51 - 64 5.1 - 6.4 2 level 7 yes
23 - 28 40 - 50 4.0 - 5.0 2 level 6 yes
19 - 22 33 - 39 3.3 - 3.9 2 level 5 yes
15 - 18 26 - 32 2.6 - 3.2 1 level 4 yes
11 - 14 19 - 25 1.9 - 2.5 1 level 3 yes
4 - 10 7 - 18 0.7 - 1.8 1 level 2 yes
< 4 < 7 < 0.7 1 level 1 no *
Setting electronically
The dishwasher is factory set at level
5.
Option menu ➞Settings ➞Water
hardness
With the help of the below chart, set
the level of the water softener
according to the hardness of the
water in your area.
117991 41/0en 20-12-2006 14:37 Pagina 13

14 electrolux first use
Filling with dishwasher salt
Only use salt specifically designed for
use in dishwashers.
All other types of salt not specifically
designed for use in a dishwasher,
especially table salt, will damage the
water softener.
Only fill with salt just before starting
one of the complete washing
programmes.
This will prevent any grains of salt or
salty water, which may have been
spilt, remaining on the bottom of the
machine for any period of time, which
may cause corrosion.
To fill:
1. Open the door, remove the lower
basket and unscrew the cap of the
salt container by turning it
anticlockwise.
2. Pour 1 litre of water inside the
container (this is necessary only
before filling with salt for the
first time).
3. Using the funnel provided, pour in
the salt until the container is full.
4. Replace the cap making sure that
there is no trace of salt on the
screw thread or on the gasket.
5. Replace the cap tightly turning it
clockwise until it stops with a click.
Do not worry if water overflows from
the unit when filling with salt, this is
quite normal.
The salt container will require topping
up periodically.
You are reminded of this by a
displayed message: REFILL SALT.
This occurs only at the start and at
the end of the washing programme;
during the running of the programme
the indication for salt refilling is not
active.
The refilling salt message can
remain visible for 2-6 hours after
the salt has been replenished,
assuming the dishwasher remains
switched on. If you are using salts
that take longer to dissolve then
this can take longer. The function
of the machine is not affected.
117991 41/0en 20-12-2006 14:37 Pagina 14

first use electrolux 15
Filling with rinse aid
Rinse aid ensures thorough rinsing,
and spot and streak free drying.
Rinse aid is automatically added
during the last rinse.
1. Open the container by pressing
the release button (A).
2. Add the rinse aid in the container.
The maximum level for filling is
indicated by "max".
The dispenser holds about 110 ml of
rinse aid, which is sufficient for
between 16 and 40 dishwashing
cycles, depending upon the dosage
setting.
According to the finish and drying
results obtained, adjust the dose of
rinse aid by means of the 6 position
selector (position 1 minimum dosage,
position 6 maximum dosage).
The dose is factory set in position 4.
Increase the dose if there are drops of
water or lime spots on the dishes after
washing.
Reduce it if there are sticky whitish
streaks on the dishes or a bluish film
on glassware or knife blades.
3. Ensure that the lid is closed after
every refill.
The rinse aid container will require
topping up periodically.
You are reminded of this by a
displayed message: REFILL RINSE
AID.
This occurs only at the start and at
the end of the washing programme;
during the running of the programme
the indication for rinse aid refilling is
not active.
117991 41/0en 20-12-2006 14:37 Pagina 15

16 electrolux first use
Clean up any rinse aid spilt during
filling with an absorbent cloth to
avoid excess foaming during the
next wash.
Only use branded rinse aid for
dishwashers.
Never fill the rinse aid dispenser
with any other substances (e.g.
dishwasher cleaning agent, liquid
detergent). This would damage the
appliance.
117991 41/0en 20-12-2006 14:37 Pagina 16

daily use electrolux 17
●Check if it’s necessary to refill with
dishwasher salt or rinse aid
●Load cutlery and dishes into the
dishwasher.
●Fill with dishwasher detergent .
●Select a wash programme suitable
for the cutlery and dishes.
●Start the wash programme.
Loading cutlery and dishes
Sponges, household cloths and any
object that can absorb water may not
be washed in the dishwasher.
●Before loading the dishes, you
should:
- Remove all left over food and
debris.
- Soften remnants of burnt food in
pans
●When loading the dishes and
cutlery, please note:
- Dishes and cutlery must not
impede the rotation of the spray
arms .
- Load hollow items such as cups,
glasses, pans, etc. with the
opening downwards so that water
cannot collect in the container or
a deep base.
- Dishes and items of cutlery must
not lie inside one another, or
cover each other.
- To avoid damage to glasses, they
must not touch.
Daily use
- Lay small objects in the cutlery
basket.
●Plastic items and pans with non
stick coatings have a tendency to
retain water drops; these items will
not dry as well as porcelain and
steel items.
●Light items (plastic bowls etc.)
must be loaded in the upper
basket and arranged so they do
not move.
117991 41/0en 20-12-2006 14:37 Pagina 17

18 electrolux daily use
For washing in the dishwasher the following cutlery and dishes
are not suitable: - Cutlery with wooden, horn, china or
mother-of-pearls handles.
- Plastic items that are not heat resistant.
- Older cutlery with glued parts that are not
temperature resistant.
- Bonded cutlery items or dishes.
- Pewter or copper items.
- Lead crystal glass.
- Steel items prone to rusting.
- Wooden platters.
- Items made from synthetics fibres.
are of limited suitability: - Only wash stoneware in the dishwasher if
it is specially marked as being
dishwasher-safe by the manufacturer.
- Glazed patterns may fade if machine
washed frequently.
- Silver and aluminium parts have a
tendency to discolour during washing:
Residues, e.g. egg white, egg yolk and
mustard often cause discolouring and
staining on silver. Therefore always clean
left-overs from silver immediately, if it is
not to be washed straight after use.
117991 41/0en 20-12-2006 14:37 Pagina 18

daily use electrolux 19
Open the door and slide out the
baskets to load the dishes.
The lower basket
The lower basket is designed to take
saucepans, lids, plates, salad bowls,
cutlery etc.
Serving dishes and large lids should
be arranged around the edge of the
basket, ensuring that the spray arms
can turn freely.
The two rows of prongs on the lower
basket can be easily lowered to allow
you to load pots, pans and bowls.
117991 41/0en 20-12-2006 14:37 Pagina 19

20 electrolux daily use
To make loading of the cutlery basket
easier, lower the cutlery basket
handle (fig.2).
For best results we recommend you
to use the cutlery grids.
If the size and dimensions of the cutlery
do not allow the use of the grids, they
can be easily hidden (fig. 3).
The cutlery basket
Long bladed knives stored in an
upright position are a potential
hazard.
Long and/or sharp items of cutlery
such as carving knives must be
positioned horizontally in the upper
basket.
Take care when loading or
unloading sharp items such as
knives.
Forks and spoons should be placed in
the removable cutlery basket with the
handles facing downwards and the
knives with their handles facing
upwards (fig.1).
If the handles protrude from the
bottom of the basket, obstructing the
lower spray arm, load the cutlery with
the handles facing upwards.
Mix spoons with other cutlery to
prevent them from sticking together.
fig. 1
fig. 2
fig. 3
117991 41/0en 20-12-2006 14:37 Pagina 20