Electrolux TW1E User manual

Tray Washer
tray washer/eng 22-02-2005 12:17 Pagina 2

Automatic unloading of trays in a lowerator
Drying section with high pressure ventilator
Automatic loading of trays from conveyor
TW1E
Exhaust of air
Large insulated and well-balanced doors
Condensing unit with saving function
Control panel
Washing and rising section
tray washer/eng 22-02-2005 12:17 Pagina 3

Key points
• The trays are automatically loaded from a cord
conveyor into the TW1E and - after washing, rinsing
and drying - automatically unloaded on a lowerator,
with a capacity up to100 trays.
• On the unloading side the dishwasher has a tray
buffer for a maximum 10 trays, in order to avoid to
block the operations during the replacement of the
trolley.
• As optional, a two-lowerators station is available.
This accessory allows to increase the tray buffer
capacity of one lowerator (up to 100 trays), giving
more time to the user, to replace the full lowerator.
• Washing and rinsing systems are designed to gua-
rantee high efficiency and performances.
• The high-pressure ventilator that blows air very
close to the trays and the inclined designed that
helps the water drain off the trays, guarantees an
efficient drying function.
TW1E
Electrolux can offer tailored solutions for creating an automatic
dishwashing system, combining Electrolux dishwashers with a pro-
per handling system equipment, such as tray conveyors, sorting and
stacking stations, cutlery removing device and napkin blower devi-
ce. The new Electrolux tray washer for automatic washing of trays
is one of the key functions in an automatic dishwashing system,
suitable to treat cookeries in canteens with up to 1200 guest per
hour. The new tray washer can guarantee the best working condi-
tions - lower noise and heat emission - thanks to the double skin
and insulated construction and to the condensing unit (standard
accessory in all models)
The internal components - washing and rinsing arms, filters, tank
rounded corners and sloping base - allow a better cleanability;
while the large and well-balanced doors give the proper accessibi-
lity for cleaning and maintenance.
The frame and the main components are made of AISI 304, while
the tank is made of acid proof stainless steel (AISI 316) for a relia-
ble and long lasting performance.
tray washer/eng 22-02-2005 12:17 Pagina 4

FTW41EN
Technical characteristics - TW1E
Speed Variable speed m/min 7-14
Capacity Variable capacity Trays/h 600-1200
Feeding motor kW 0,25
Washing section Temperature °C 55-65
Tank capacity l 114
Pump capacity l/min 700
Pump power kW 2,55
Tank heating elements kW 9
Rinsing section Final rinse l/h 200
Temperature °C 85
Boiler heating elements kW 12
Drying tunnel Temperature °C 30-40
Quality of circulated air m3/h 195
Fan motor kW 3
Total power kW 27,2
Condensing unit Steam cooling area m210,5
Water consumption (1) l/h 300
Air emission m3/h 450
Air temperature (2) °C 25-35 approx.
Humidity % 75-85
Fan motor kW 0,11
Energy savings Condensing unit kW/h 12
Dimensions Lenght with dryer (3) mm 2900
Height/open door mm 1905/2050
Width mm 824
Working height mm 900
Feet mm 200
Water supply Temperature "operation" °C 10-15
Temperature "tank filling" °C 50
Hardness maximun °dH 5
Pressure Bar 3-9
STEAM HEATED MACHINES
Total power With dryer kW 6,2
Steam pressure bar 0,5-3,0
Steam consumption kg/h 34
(1) Water for final rinse is in this volume
(2) Cold water temperature 10°C
(3) Including the hood to install on unloading section for noise reduction
Electrolux Food Service Equipment
www.electrolux-professional.com
TW1E
A= Hot water inlet
B= Colt water inlet
C= Drain
F= Steam inlet
G= Condensation outlet
P= Fumes outlet
Q= Equipotential screw
tray washer/eng 22-02-2005 12:17 Pagina 1