Electrolux EDI 96150 W User manual

user manual
manual de instrucciones
Iron Aid
EDI 96150

We were thinking of you
when we made this product

electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class
product from Electrolux, which hopefully
will provide you with lots of pleasure in
the future. The Electrolux ambition is to
offer a wide variety of quality products
that make your life more comfortable.
You will find some examples on the cov-
er in this manual. Please take a few min-
utes to study this manual so that you
can take advantage of the benefits of
your new machine. We promise that it
will provide a superior User Experience
delivering Ease-of-Mind. Good luck!

4electrolux
Contents
Safety 5
Disposal 7
Environmental tips 8
Appliance description 9
Control panel 10
Prior to using for the first time 12
Sorting and preparing laundry 12
Starting up for the first time 13
Iron AidTM - Steam-System 14
Overview of Iron AidTM programmes 16
Starting an Iron AidTM programme 21
Drying 23
Overview of drying programmes 23
Starting a drying programme 27
Cleaning and maintenance 28
What to do if… 36
Technical data 38
Consumption values 38
Installation safety instructions 39
Removing transport safety
equipment 40
Special accessories 41
Guarantee/Customer Service 42
Service 43
T
he following symbols are used in this user manual:
1
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
3General information and tips
2Environmental information

safety electrolux 5
Important: Only operate the Iron Aid programmes with distilled water!
Mains water causes damage to the appliance.
Safety
Before first starting up
•Notethe”Installation and con-
nection instructions”
•Important! The appliance must be
moved in vertical position for trans-
port.
• Before first starting up, check the
machine for any damage incurred
during transport. Never connect up a
damaged machine. If parts are dam-
aged, contact your supplier.
Intended use
• The appliance is intended for drying
and iron aid treatment of standard
laundry in domestic applications.
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of experi-
ence and knowledge, unless they
have been given supervision or in-
struction concerning use of the ap-
pliance by a person responsible for
their safety.
• Do not dry unwashed items with dry-
ing programmes.
• Conversions or modifications to the
appliance are not permitted.
• When using dry-cleaning sets: Only
use those products which are de-
clared as suitable for the appliance
by the manufacturer.
• Items such as foam rubber (latex
foam) shower caps, waterproof tex-
tiles, rubber backed articles and
clothes or pillows fitted with foam
rubber pads should not be dried in
the appliance.
• Fabric softeners, or similar products,
should be used as specified by the
fabric softener instructions.
• Do not place heavily worn laundry
items in the appliance. Risk of fire!
• Do not place laundry items with
loose fillings (e.g. cushions) in the
appliance. Risk of fire!
• Parts with rigid components (e.g.
door mats) may cover the air holes.
Risk of fire! Do not place such items
in the appliance.
• Do not overfill the appliance. Risk of
fire! Observe max. loading volume of
6 kg.
• Ensure that explosive objects (e.g.
cigarette lighters, spray cans, etc.)
do not enter the appliance with the
laundry. Risk of fire and/or explo-
sion!
• Items that have been soiled with
substances such as cooking oil, ac-
etone, alcohol, petrol, kerosene,
spot removers, turpentine, waxes
and wax removers should be
washed in hot water with an extra
amount of detergent before being
dried in the appliance.
• Clean micro filter and fine filter after
every drying or Iron Aid programme:
• Never operate the appliance without
fluff filters or with damaged or
blocked fluff filters. Risk of fire!

6electrolux safety
• Only fill the water reservoir with dis-
tilled water. Do not use tap water or
any additives! The condensed water
from this appliance’s condensed wa-
ter container can also be used, if it is
filtered first (e. g. with a coffee filter).
• Clean the heat exchanger regularly.
• With stacked washer and Iron Aid
appliance: Do not place objects on
the appliance. These may fall off dur-
ing operation.
• The covering bonnet of the bulb for
the drum light must be screwed
down tightly.
Child safety
• Keep packaging away from children.
There is a risk of suffocation!
• Children often do not recognise the
hazards associated with electrical
appliances. Children should be su-
pervised to ensure that they do not
play with the appliance.
• Make sure that children and small
animals cannot climb into the appli-
ance’s drum. Could endanger life!
Keep the appliance door shut when-
ever it is not being used.
General safety
• Only specialists may undertake re-
pairs on the appliance.
• Never start up the appliance if the
mains cable is damaged or if the op-
erating screen, operating plate or
base area are damaged so that the
inside of the machine is open and
accessible.
• Should the appliance power supply
cable need to be replaced, this must
be carried out by our Service Centre.
• Switch off the appliance before all
cleaning, care or maintenance work.
Also disconnect the mains plug from
the socket or – with permanent con-
nections – switch off the LS switch in
the fuse box and/or fully unscrew the
screwed-in fuse.
• Disconnect the machine from the
power supply during long pauses in
operations.
• When removing from the socket,
never pull the mains plug by the ca-
ble, instead take a hold of the plug.
• Manifold plugs, couplings and exten-
sion cables must not be used. Risk
of fire from overheating!
• The height adjustable screw feet
must never be removed.
• Do not spray down the appliance
with jets of water. Risk of electric
shock!
• Do not lean on the open door. The
appliance may tip over.
• If you interrupt the drying or Iron Aid
programme laundry or drum may be
hot. Risk of burns! Take care when
removing the laundry.
• Take care when interrupting the Iron
Aid programme: Do not open the
door of the appliance during the
evaporation phase: Hot steam can
cause burns. The evaporation phase
is indicated by the animation of the
steam symbol in the display.
• Never stop the appliance before the
end of the drying cycle unless all
items are quickly removed and
spread out so that the heat is dissi-
pated.
• The final part of a drying cycle occurs
without heat (cool down cycle) to en-
sure that the items are left at a tem-
perature that ensures that the items
will not be damaged.
• Caution - hot surface:
Do not touch the surface while the
appliance is running.

disposal electrolux 7
Disposal
Packaging material
The packaging materials are envi-
ronmentally friendly and can be re-
cycled. The plastic components are
identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the
packaging materials in the appro-
priate container at the community
waste disposal facilities.
Old appliance
The symbol Won the product or on
its packaging indicates that this
product may not be treated as
household waste. Instead it shall be
handed over to the applicable col-
lection point for the recycling of
electrical and electronic equipment.
By ensuring this product is dis-
posed of correctly, you will help pre-
vent potential negative
consequences for the environment
and human health, which could oth-
erwise be caused by inappropriate
waste handling of this product. For
more detailed information about re-
cycling of this product, please con-
tact your local city office, your
household waste disposal service
or the shop where you purchased
the product.
Warning! Remove mains plug from
socket when you have no further
use for the machine. Cut off mains
cable and dispose of together with
plug.
Destroy loading door lock. Children
cannot then lock themselves in the
machine and put their lives at risk.

8electrolux environmental tips
Environmental tips
• During the drying process, laundry
becomes fluffy and soft. Fabric sof-
teners are not therefore needed
when washing.
• Condensed water can be used for
iron aid programmes after beeing fil-
tered.
• Your appliance will function most
economically if you:
– spin the laundry well before drying.
Example: Consumption data – de-
pending on spinning speed – for
6kg of laundry, dried using the
COTTON
CUPBOARD (AL-
GODÓN SECO ARMARIO) pro-
gramme.
– always keep the ventilation slots
on the base of the appliance unob-
structed;
– use the loading volumes specified
in the programme overview;
– ensure you have good ventilation
in the installation room;
– clean the micro-fine filter and fine
strainer after each drying or Iron
Aid cycle;
Pre-draining Drying cycle
Revolutions per minute Residual dampness Energy
in kWh
in litres as a %
800 4.2 70 4.0
1000 3,6 60 3,7
1200 3.2 53 3.3
1400 3.0 50 3.1
1800 2.5 42 2.6

appliance description electrolux 9
Appliance description
Drawer with
condensed water
container
Screwed feet
(with height adjust-
ment)
Loading door
(interchangeable
stop)
Control panel
Drainage hose
for water tank
Steam nozzle
Type plate
Micro-fine filter
(lint filter)
Fine strainer
(lint filter)
Lamp for inside
light
Large mesh filter
(lint filter)
Filler neck for
water tank
Button for opening
door in plinth
Air slots
Door in
plinth
Heat exchanger

10 electrolux control panel
Control panel
What is shown in the display
Programme knob and
On/Off switch Display
Function buttons START/PAUSE-button
Maintenance displays
- HEAT EXCHANGER
- CLEAN FILTER
- CONTAINER
DELAY
TIMER
button
Degree of
dryness
Display
DELICATE
(DELICADO)
LOAD (CARGA)
DRYNESS(GRADO
DE SECADO)
BUZZER
(ALARMA)
Start time
preselection
Child safety device
Anticrease
Drying
Iron Aid
programme
Cooling
Steam display
Water tank
indicator
Start time /
programme
duration
display

control panel electrolux 11
Function overview: Iron AidTM Steam System
This appliance can be used both as a
dryer and to condition clothes (Iron Aid)
to treat garments using steam.
When it is operating as a dryer, there are
9 available programmes.
When it is operating as a steam appli-
ance, there are 4 available programmes
for smoothing and removing odours
from wet and dry laundry and the
REFRESH (VENTILACIÓN) pro-
gramme for smoothing and removing
odours from dry outerwear. Garments
are softened and smoothed and require
a lot less ironing. If laundry is wet, a dry-
ing programme is automatically activat-
ed before the Iron Aid programme
starts.
Exception: The REFRESH (VENTI-
LACIÓN) programme must only be used
for dry laundry.
Programmes
Laundry
type
Iron Aid
washed
garments
Smoothes
worn
clothing
Odour
removal
worn
clothing
DRYING
Cotton EXTRA
(Algodón EXTRA SECO) wet
Cotton CUPBOARD
(Algodón SECO ARMARIO) wet
Cotton HAND IRON
(Algodón SEMISECO) wet
Synthetics EXTRA
(Sintéticos EXTRA SECO) wet
Synthetics CUPBOARD
(Sintéticos SECO ARMARIO) wet
Synthetics HAND IRON
(Sintéticos SEMISECO) wet
WOOL (LANA) wet
SILK (SEDA) wet
TIME (TIEMPO) wet
IRON AID
COTTON (ALGODÓN) wet/
dry X X X
SYNTHETICS
(SINTÉTICOS) wet/ dry X X X
COTTON (ALGODÓN) wet/
dry X X X
SYNTHETICS
(SINTÉTICOS) wet/ dry X X X
REFRESH
(VENTILACIÓN) dry X X

12 electrolux prior to using for the first time
Prior to using for the first time
IIn order to remove any residues which
may have been produced during pro-
duction, wipe the dryer drum with a
damp cloth or carry out a brief drying cy-
cle ( TIME (TIEMPO) programme of
30 min.) with damp cloths in the ma-
chine.
1. Turn the programme knob to
TIME (TIEMPO).
2. Press the TIME (TIEMPO) button re-
peatedly until 0.30 appears in the dis-
play.
3. Press the START/PAUSE (INICIO/
PAUSA) button.
Sorting and preparing laundry
Sorting laundry – general
• Sorting by fabric type:
– Cotton/linen for programmes in
the COTTON (ALGODÓN) pro-
gramme group.
– Mixed fibres and synthetics for
programmes in the
SYNTHETICS (SINTÉTICOS)
programme group.
• Sorting by care label. The care labels
mean:
Important: Do not place in the appli-
ance any wet laundry which is not
specified on the care label as being
suitable for tumble-drying.
This appliance can be used for all wet
laundry items which are labelled as suit-
able for tumble-drying.
• Do not dry new, coloured textiles to-
gether with light-coloured laundry
items. Textile colours may bleed.
• Do not dry cotton jersey and knit-
wear with the EXTRA (EXTRA
SECO) programme. Items may
shrink!
• Wool and wool-like textiles can be
dried using the WOOL (LANA)
programme. Before the drying cycle
spin the woollen textiles as well as
possible (max. 1200 rpm). Only dry
woollen textiles together which are
similar or the same with respect to
material, colour and weight. Please
dry heavy laundry items made of
wool separately.
nm l k
Drying in the tumble dryer
possible in principle Dry at normal temperature
Dry at reduced temperature
(press SPECIAL CARE
(DELICADO) button!)
Drying in the
tumble dryer
not
possible

starting up for the first time electrolux 13
Special notes about Iron Aid
• The following textiles cannot be
treated using an Iron Aid pro-
gramme:
woollen knitwear, leather, textiles
with large metal, wooden or plastic
parts, textiles with rusting metal
parts, oilskins or wax cotton gar-
ments.
• To smooth or freshen laundry with an
Iron Aid programme, sort laundry by
size, weight, material and colour.
Only smooth textiles together that
are similar in terms of size, weight,
material and colour.
• Do not dry new, coloured textiles to-
gether with light-coloured laundry
items. Colours may fade (check col-
our fastness of fabric when damp in
an inconspicuous area).
• Do not use dry cleaning sets such as
dryel in combination with Iron Aid
programmes.
Preparing laundry - general
• To avoid laundry becoming tangled:
close zips, button up duvet covers
and tie loose ties or ribbons (e.g. of
aprons).
• Empty pockets. Remove metal items
(paper clips, safety pins, etc).
• Turn items with double-layered fab-
rics inside out (e.g. with cotton-lined
anoraks, the cotton layer should be
outermost). These fabrics will then
dry better.
Special notes about Iron Aid
• Before treating garments with an Iron
Aid programme, remove stains by
washing or using localised stain re-
Starting up for the first time
Switching machine on / switching
light on
Turn the programme knob to any pro-
gramme. The machine has been
switched on. When the loading door is
opened, the drum is illuminated.
Opening loading door / loading
laundry
1. Open loading door:
Push against the loading door (push
point )
2. Load your laundry (do not force it in/
overload the machine).
Caution! Be careful not to trap laun-
dry in between the loading door and
rubber seal.
3. Close loading door securely. Lock
must audibly lock.

14 electrolux iron aidTM - steam-system
Iron AidTM - Steam-System
Fill water tank
You must fill up the water tank before
using an Iron Aid programme for the first
time. Use the distilled water provided if
there is not yet any condensed water
from previous drying programmes (see
chapter on ‘Cleaning and Maintenance,
Emptying condensed water container’).
If, after an Iron Aid programme is select-
ed, the water tank indicator on the
display lights up, you will need to fill up
the water tank with distilled water. Oth-
erwise, you will not be able to start any
Iron Aid programme.
Important Only fill the water tank
with distilled or fully desalinated
water. Do not use tap water or addi-
tives! You can also use the con-
densed water from the condensed
water container, as long as you filter
it first (use the canister supplied
with the filter fitted: see figure oppo-
site).
1. Pull drawer containing condensed
water container out a little (1), then
pull out the water tank’s filler neck
(2).

iron aidTM - steam-system electrolux 15
2. Fill with distilled water from the can-
ister provided, up to the MAX mark
inside the container.
3. Push filler neck and drawer with con-
densed water container back in.
When dry, all textiles not specifically
prohibited in the chapter ‘Sorting
and preparing laundry’ may be
treated with the Iron Aid Steam Sys-
tem. Wet textiles may only be treat-
ed if they are labelled as suitable for
dry programmes.

16 electrolux overview of iron aidtm programmes
Overview of Iron AidTM programmes
All information on applications is for
guidance only. Smoothing results
may vary depending on the selected
programme and especially the fit-
tings and material properties of the
textile. The results can be improved
if necessary by using different pro-
grammes and steam volumes. For
example, some textiles containing
more than 20% synthetics but with
the right fittings may behave more
like cotton textiles in an Iron Aid
programme. You may therefore get
better smoothing results by select-
ing a cotton Iron Aid programme.
Given the wide range of different
textile grades and properties that
can be manufactured today using
different mechanical and chemical
processes, we recommend running
the first few Iron Aid programmes at
low steam levels and with a small
number of garments that are as sim-
ilar as possible. Later, you can care-
fully start to vary the conditions of
Iron Aid programmes to learn from
experience how to get the best re-
sults from the volume of laundry
loaded, the quality of the textiles
and the most suitable steam levels
and Iron Aid programmes.
Please also note the accompanying
‘Textile Guide’.
Programmes
Max. load * (Weight when dry)
Additional
functions
Application/properties
LOAD (CARGA) BUZZER (ALARMA)
COTTON
(ALGODÓN) 1,0kg • • For 1- 5 cotton shirts. Min. 80% natural fibres (cotton, linen etc). wet, dry
SYNTHETICS
(SINTÉTICOS) 1.0kg • • For 1- 5 synthetic shirts. Max. 20% nat- ural fibres (cotton, linen etc). wet, dry
COTTON
(ALGODÓN) 3,0kg • • For smoothing cotton garments. Min. 80% natural fibres (cotton, linen etc). wet, dry
SYNTHETICS
(SINTÉTICOS) 1.5kg • • For smoothing easy-care garments.
Max. 20% natural fibres (cotton, linen
etc).
wet,
dry
REFRESH
(VENTILACIÓN) • •
For one suit or up to two suit jackets or
pairs of trousers or similar garments.
Also suitable for removing odours. For
dry garments only
dry

overview of iron aidtm programmes electrolux 17
All information provided on select-
ing the steam level and correspond-
ing load are suggestions only. In
some cases, using a higher steam
level or smaller load may give better
results.
The REFRESH (VENTILACIÓN)
programme is a gentle Iron Aid pro-
gramme for non-washable textiles.
Any distortion to the shape of a gar-
ment which might occur in few cas-
es, can be remedied by ironing.
* exact programme times appear in the
display once the machine has per-
formed wet/dry recognition (approx. 2
min.)
Programme LOAD
(CARGA)
Loading
volume
DURATION
dry*
[min.]
DURATION
wet*
[min.]
COTTON
(ALGODÓN)
MIN 1 - 2 items
19 +/-3 +40 +/- 10MED 3 - 4 items
MAX 5 items
SYNTHETICS
(SINTÉTICOS)
MIN 1 - 2 items
21 +/-3 +30 +/- 10MED 3 - 4 items
MAX 5 items
COTTON
(ALGODÓN)
MIN 0.5 - 1 kg
20 +/-3 +40 +/- 10MED 1 - 2 kg
MAX 2 - 3 kg
SYNTHETICS
(SINTÉTICOS)
MIN 0,2 - 0,5 kg
21 +/-3 +30 +/- 10MED 0.5 - 1 kg
MAX 1 – 1.5 kg
REFRESH
(VENTILACIÓN)
MIN 1 pair of trousers
19 +/-3MED 1 jacket
MAX 1 suit

18 electrolux overview of iron aidtm programmes
Selecting the programme
Use the programme selector to set the
programme you require. The estimated
programme duration without drying cy-
cle (in minutes) appears in the display.
Select steam level (LOAD - CAR-
GA)
To achieve the best results, differ-
ent steam levels are required for dif-
ferent volumes of laundry.
The LOAD (CARGA) button is used
to set the required steam level: MIN,
MED or MAX.
All Iron Aid programmes, apart from the
REFRESH (VENTILACIÓN) pro-
gramme, automatically recognise the re-
maining dampness in clothes. When
laundry is wet, a drying cycle is activated
first if required.
The programme chart shows the steam
levels appropriate for the selected load,
under LOAD (CARGA).
1. Press the LOAD (CARGA) button re-
peatedly until the desired steam level
(MIN, MED or MAX) is shown in the
display.
If the LOAD (CARGA) button is not
pressed after an Iron Aid programme is
selected, the medium steam level (MED)
is selected automatically. If you select
the REFRESH (VENTILACIÓN) pro-
gramme, MIN is selected automatically.

overview of iron aidtm programmes electrolux 19
Important: If in doubt, always select
a lower steam level first until you
have more experience with load vol-
umes, fabric types and the corre-
sponding optimum steam level.
If too high a steam level is selected,
garments may lose their shape. If
too low a steam level is selected,
creases may remain.
Selecting additional functions
The additional functions available for the
Iron Aid programmes are BUZZER
(ALARMA), TIME DELAY (INICIO DIF-
ERIDO) and the CHILD SAFETY DE-
VICE.
BUZZER (ALARMA)
The appliance is supplied with the
BUZZER (ALARMA) function activated.
When the drying cycle has finished, an
intermittent acoustic signal will sound.
Each time a button is pressed or a pro-
gramme is changed using the pro-
gramme knob, an audible signal is also
set to sound.
The button is used to switch the func-
tion on or off. When the function is ac-
tive, the BUZZER (ALARMA)
symbol appears in the display.

20 electrolux overview of iron aidtm programmes
Delay timer
With the DELAY (INICIO DIFERIDO)
button, you can delay the start of a
programme by between 30 minutes
(30') and a maximum of 20 hours
(20h).
1. Select the programme and addition-
al functions.
2. Press the DELAY (INICIO DIFERIDO)
button as many times as necessary
until the required start delay appears
on the display, e.g. 12h if the pro-
gramme is to be started in 12 hours.
If the display is showing 20h and you
press the button again, the time de-
lay will be cancelled. The display will
show 0' and then the duration of the
selected programme.
3. To activate the delay timer, press the
START/PAUSE (INICIO/PAUSA) but-
ton. The amount of time remaining
until the programme is set to start is
continuously displayed (e.g. 15h,
14h, 13h, … 30'etc).
Child safety device (
The child lock can be set to prevent a
programme being accidentally started
or a programme in operation being acci-
dentally changed.
The child safety device locks all buttons
and the programme knob.
The child safety device can be activated
or deactivated by holding down the
BUZZER (ALARMA) and TIME (TIEMPO)
buttons simultaneously for 5 seconds.
– Before programme is started: Appli-
ance cannot be used
– After programme is started: Pro-
gramme in operation cannot be
changed
The (symbol appears in the display to
indicate that the child safety device is
activated.
The child safety device is not deactivat-
ed once the programme comes to an
end.
If you want to set a new programme,
you must first deactivate the child safety
device.