Electrolux EHM 6731 User manual

Gas hobs - Kombinirana plinska iplinsko-strujna plo a-Vgradna kuhalna ploš a
Mod. EHG 671 - EHM 6731 - EHM 6722
INSTRUCTION BOOKLET
UPUTE ZA UPOTREBU
NAVODILAZAUPORABO
35679-4801 HR-RO-SI-SK-BG

2
About Installation, Cleaning
and Maintenance
• It is mandatory that all operations required for the
installationarecarriedoutbyaqualifiedorcompetent
person, in accordance with existing rules and
regulations.
• Disconnect the appliance from the electrical supply,
before carrying out any cleaning or maintenance
work.
• Ensure a good ventilation around the appliance. A
poor air supply could cause lack of oxygen.
• Ensurethatthegassupplycomplieswiththegastype
statedontheidentificationlabel,placednearthegas
supplypipe.
•Usingagascookingappliancewillproduce heat
and moisture in the room which it has been
installed in. Ensure a continuous air supply,
keeping the air vents in good conditions or
installing a cooker hood with discharge tube.
•In case of intensive or long time use of the
appliance,maketheventilationmoreefficient,by
opening a window or increasing the electric
exhaust fan power.
• Onceyouremovedallpackagingfromtheappliance,
ensurethatitisnotdamagedandtheelectriccableis
inperfectconditions.Otherwise,contactyourdealer
beforeproceedingwiththeinstallation.
• The manufacturer disclaims any responsability
shouldallthesafetymeasuresnotbecarriedout.
• Undernocircumstancesshouldyouattempttorepair
the appliance yourself. Repairs carried out by
unexperiencedpersons maycause injuryor serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
During Operation
• It is most important that this instruction book should
be retained with the appliance for future reference.
Should the appliance be sold or transferred, always
ensurethatthebookisleftwiththeapplianceinorder
thatthenewownercangettoknowthefunctionsofthe
applianceandtherelevantwarnings.
• Thisappliance hasbeendesignedfornonprofessional
purpose in private houses only. It is meant to cook
ediblefoodstuffonlyandMUSTNOTbeusedforanyother
purposes.
• Itis dangerous to alterthe specification inany way.
• Forhygieneandsafetyreasons,thisapplianceshould
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
English
These warnings are provided in the interest of safety. You MUST read them carefully before
installing or using the appliance.
Important Safety Information
• Undernocircumstancesshouldyouattempttorepair
the appliance yourself. Repairs carried out by
unexperiencedpersons maycause injuryor serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
• Ensurethat allcontrol knobsare inthe OFFposition
when not in use.
• Shouldyouconnectanyelectrical tooltoaplugnear
thiscookingappliance,ensurethatelectriccablesare
not in contact with it and keep them far enough from
the heated parts of this appliance.
•Iftheapplianceis outoforder,disconnectit fromthe
electric supply.
Child Safety
• Thisappliancehasbeendesignedtobeoperatedby
adultsandchildrenundersupervision.Youngchildren
MUSTNOT beallowedtotamperwiththecontrolsorplay
nearorwiththeoven.
• Accessible parts of this appliance may become hot
whenitisinuse.ChildrenshouldbeKEPT AWAY untilit
hascooled.
Environmental Information
• Afterinstallation,pleasedisposeofthepackagingwith
dueregardtosafetyandtheenvironment.
• Whendisposingofanoldappliance,makeitunusable,
by cutting off the cable.
The following symbols will be found in the text to guide
you throughout the Instructions:
SafetyInstructions
Step by step instructions for an operation
HintsandTips
Environmentalinformation
Guide to Use the instructions
These instructions are only for the countries
stated by the symbol printed on the front cover
ofthisinstructionbook.
!!
!!
!

Once the hob has been installed, it is
important to remove any protective materials,
which were put on in the factory.
Hob burners control knobs
The hob burners control knobs are situated on the hob
right hand side. The symbols on the knobs mean that:
there is no gas supply
there is maximum gas supply
there is minimum gas supply
Lighting the burners
For easier lighting, proceed before putting a
pan on the pan support.
To light a burner, push in the relevant knob and
turn it anticlockwise to "maximum position".
After lighting the flame, keep the knob pushed
down for about 5 seconds. This will allow the
"thermocouple" (Fig. 1, lett. D) to be heated and
thesafetydevice tobeswitched off,otherwise the
gassupply wouldbe interrupted.
Then, check the flame is regular and adjust it as
required.
If you cannot light the flame even after several
attempts, check the "cap" (Fig. 1, lett. A) and the
"crown"(Fig.1,lett. B)areinthe correctposition.
Toputtheflameout,turntheknobtothesymbol••
••
•.
• Always turn the flame down or put it out before
taking the pans off the burner.
Contents
This appliance complies with the following
E.E.C.Directives:
- 73/23-90/683(LowVoltageDirective);
- 89/336 (Electromagnetical Compatibility Directive);
- 93/68(GeneralDirectives)
andsubsequentmodifications.
MANUFACTURER:
ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)
For the User For the Installer
Instruction for the User
Fig. 1 FO 0204
A-Burner cap
B-Burnercrown
C-Ignition candle
D-Thermocouple
Important Safety Information 2
Instruction for the User 3
Cleaning and Maintenance 5
Technical Data 6
Instruction for the Installer 6
Gas connection 7
Electrical Connection 8
Adaptation to different types of gas 9
Building In 10
!!
!!
!
•
3

4
Burner minimum maximum
diameter diameter
Large (rapid) 180 mm. 260 mm.
Medium (semirapid) 120 mm. 220 mm.
Small (auxiliary) 80 mm. 160 mm.
Using the hob correctly
To ensure maximum burner efficiency, it is strongly
recommended that you use only pots and pans with a
bottomfittingthesizeoftheburnerused,sothatflamewill
not spread beyond the bottom of the vessel (Fig. 2 -a).
It is also advisable, as soon as a liquid starts boiling, to
turn down the flame so that it will barely keep the liquid
simmering.
Use only pans or pots with flat bottom.
Carefully supervise cookings with fats or
oil,sincethesetypesoffoodstuffcanresult
in a fire, if over-heated.
Use of electric plates
(Mod. EHM 6731 - EHM 6722)
To switch on the plates, turn the relevant knob to the
requiredposition.
The plates are regulated by a 7 position switch:
Position0: off
Position 1: minimum disbursement of heat
Position 6: maximum disbursement of heat
Thepilotlight signalstheconnection oftheelectric plate.
It is important to note that the plate may smoke
andproduceaslightlyunpleasantodourwhenused
for the first time. This is quite normal and will
disappearaftera shortwhile.
Using the plates correctly
• Whencooking byelectric, saucepansshouldhave a
thick base and be perfectly flat in order to ensure
totalcontactwiththeplateand, consequently,perfect
conduction(Fig. 2-b).
• Occasionally,saucepanshaveathinbottomandthese
loosetheirshapeoveraperiodof time. Inthismanner
two of the qualities of the electric plate are lost: the
even distribution of heat and the saving of energy.
Cooking time is also lengthier.
• Asregards thesizeofthesaucepans: forbestresults,
the plate and the saucepan should have the same
diameter. The diameter of the saucepan may be
slightly larger; a smaller diameter is not advised.
• Neverleave theplatesonwithoutasaucepan! Switch
offthe platejust beforethe endof cookingtime. The
heataccumulated bythe plate willfinish cookingthe
foodandsave energy.
When cooking with fats or oils maximum care
must be taken as these can self-ignite when
over-heated.
Fig. 2 - a
Fig. 2 - b

5
Cleaning and Maintenance
Disconnect the appliance from the electrical
supply, before carrying out any cleaning or
maintenance work.
General cleaning
Wash the enamelled components with warm soapy
water.Never use abrasivecleaners
Frequently wash the "caps" and the "crowns" with hot
soapy water, carefully taking away any built-up of food.
Regularly wipe over the hob top using a soft cloth weel
wrungoutinwarmwatertowhichalittleliquiddetergent
hasbeenadded.Avoid theuseofthefollowing:
-householddetergentandbleaches;
-impregnatedpadsunsuitablefornon-sticksaucepans;
- steel wool pads;
-bath/sinkstainremovers.
Should the hob top become heavily soiled, it is
recommendedthata propercleaningproductis used.
Pan supports
The pan supports are dishwasher proof.
If the marks are particularly difficult to remove, use
common non-abrasive cleaners or specific products.
Never use steel wool pads or acids.
Ignition candle
The electric ignition is obtained through a ceramic
"candle"and a metalelectrode (fig.1-lett. C).Keep these
components well clean, to avoid difficult lighting, and
check that the burner crown holes are not obstructed.
Cleaning of the hotplates
Spills on the hotplates should be removed using warm
water and a soft cloth.
Alternatively, wipethe plateswith adrop ofolive oil ona
kitchen towel (while the plates are still warm).
Periodic Maintenance
Periodically ask your local Service Centre to check the
conditions of the gas supply pipe and the pressure
adjuster, if fitted.
To ensure the good operation of the hob and its safety
features, it is necessary that the taps are periodically
lubricated.
•The periodic lubrication of the taps must be
carried out by qualified personnel, which you
must refer to also in case of malfunctioning.
Fig. 3 FO 2110
Service and original spare parts
This machine, before leaving the factory, has been
tested and studied by many experts and specialists, in
order to give you the best results.
Any repair work which needs to be carried out should
be done with the utmost care and attention.
For this reason we recommend that for any problem
you contact the dealer who sold it to you, or our nearest
authorized Service Centre, specifying the nature of the
problem, the appliance model (Mod.), the product
number (Prod. No.) and the serial number (Ser. No.)
marked on the identification plate.
Original spareparts, certified by
the product manufacturer and
carrying this symbol are only
available at our Service Centre
and authorized spareparts
shops.

6
Gas Burners Rating
Rapid Burner 3,0 kW (G20) - 2,8 kW (G30/G31)
Semirapid Burner 2,0 kW
AuxiliaryBurner 1,0 kW
Appliance Class 3
Category II 2H3+
Setting Natural Gas G20 - 20 mbar
Gas connection G 1/2"
•Thefollowinginstructionsaboutinstallationand
maintenance must be carried out by qualified
personnel in compliance with the regulation in
force.
•The side walls of the unit in which the hob is
goingtobeinstalled,mustnotexceedtheheight
of the working top.
•Avoidinstallingtheapplianceintheproximityof
inflammable materials (e.g. curtains, tea towels
etc.).
•Theappliancemustbeelectricallydisconnected
before all interventions. If any electric supply to
the appliance is required to carry out the work,
ensureallthenecessaryprecautionsarefollowed.
THE MANUFACTURER WILL NOT ACCEPT
LIABILITY,SHOULDANY OF THE OTHERSAFETY
INSTRUCTIONS INCORPORATED IN THIS BOOK
ORTHE REGULATION IN FORCEBEIGNORED.
Technical Data
Instruction for the Installer
Electric hotplates
Mod. EHM 6731
Small hotplate Ø 145 mm. 1500 W
Mod. EHM 6722
Small hotplate Ø 145 mm. 1000 W
Large hotplate Ø 180 mm. 2000 W
Electric Supply
230 V 50 Hz
Hob recess dimensions
Length 550mm.
Width 470mm.

7
FO 0067
Fig. 4
Choose fixed connections or use a flexible pipe in
stainlesssteel incompliancewith theregulation inforce.
If using flexible metallic pipes, be careful they do not
come in contact with mobile parts or they are not
squeezed. Use the same attention when the hob is
combinatedwith anoven.
IMPORTANT - To ensurea correct operation,a saving
of energy and the long-life of the appliance, the voltage
pressure of the appliance must correspond to the
recommendedvalues.
Theadjustableconnectionis fixedtothe comprehensive
ramp by means of a threaded nut G 1/2". Interpose the
sealing between the components as shown in Fig. 4.
Screwthe partswithoutforcing, adjustthe connectionin
therequired directionandtighten everything.
Connection using flexible non
metal pipes
When the connection can be easily inspected in its full
extent, there is the chance to use a flexible pipe
according to the rules in force. The flexible pipe must be
tightly fixed using clamps according to the rules in force.
LPG : use the rubber pipe holder «D» (Fig. 4).
Always insert the gasket «B». Then proceed with the
gas connection.
The flexible pipe should be made ready for use in such
a way that:
- nowhere it can reach overtemperature, other than
room temperature, higher than 30°C; if the flexible
pipe, to reach the cock, must run behind the range,
it must be installed as shown in Fig. 4;
- it is no longer than 1500 mm;
- it shows no throttles;
- it is not subject to traction or torsion;
- it doesn't get in touch with cutting edges or corners;
- it can be easily inspected in order to check its
condition.
The control of preservation of the flexible pipe consists
in checking that:
- it doesn't show cracks, cuts, marks of burnings both
on the end parts and on its full extent;
- the material is not hardened, but shows its normal
elasticity;
- the fastening clamps are not rusted;
- expiry term is not due.
If one or more abnormalities are seen, do not repair the
pipe, but replace it.
Important
Once installation is complete, check the perfect
seal of every pipe fitting, using a soapy solution,
neveraflame
Gas connection
A) Rampwithendingnut
B) Seal
C) Adjustableconnection
D) Rubber pipe holder for LPG
D

8
The following instructions about installation
must be carried out by qualified personnel in
compliance with the regulation in force.
The appliance is designed to be connected to 230 V
monophase electricity supply.
The connection must be carried out in compliance with
the laws and regulations in force.
Beforetheapplianceis connected:
1) checkthatthemainfuseandthedomesticinstallation
can support the load (see the rating label);
2) check that the power supply is properly earthed in
compliancewith the currentrules;
3) check the socket or the double pole switch used for
theelectricalconnectioncanbeeasilyreachedwith
theappliance built in thefurniture unit.
Theappliance issupplied witha connectioncable. This
hastobeprovidedwithaproperplug,abletosupportthe
load marked on the identification plate. To connect the
plugtothecable,followtherecommendationgiveninFig.
5. The plug has to be fitted in a proper socket.
Ifconnectingtheappliancedirectlytotheelectricsystem,
it is necessary that you install a double pole switch
betweenthe applianceand theelectricity supply,with a
minimumgapof3mm.betweentheswitchcontactsand
ofatypesuitablefortherequiredloadincompliancewith
thecurrentrules.
Theconnectioncablehastobeplacedinorderthat,ineach
part,it cannotreacha temperaturehigher than90°C.
The brown coloured phase cable (fitted in the terminal
blockcontactmarkedwith"L")mustalwaysbeconnected
to the network phase.
Replacement of the voltage cable
Only cable types H05V2V2-F T90 or H05 BB-F (section:
3 x 1,5 mm2) must be used.
Theyellow/green earthwire mustbeapproximately 2cm.
longerthan thephase wires(Fig. 6).
Fig. 6
FO 0073
Neutral
Earth (yellow/green)
Electrical Connection
Fig. 5
TUBO RIGIDO IN RAME
O FLESSIBILE IN
ACCIAIO INOX
FASCETTE
VISTA DAL RETRO
{
SI
Aperture
di servizio
ricavate
nel mobile
VISTA DAL RETRO
NO
FO 0238
YES RIGID COPPER PIPE OR
FLEXIBLEPIPE INSTAINLESS
STEEL

9
Injectors replacement
• Removethepansupports.
• Removetheburner'scapsandcrowns.
• With a socket spanner 7 unscrew and remove the
injectors (Fig. 7), and replace them with the ones
required for the type of gas in use (see table 2).
• Reassembletheparts,followingthesameprocedu-
rebackwards.
• Replacetheratinglabel(placednearthegassupply
pipe)with therelevant onefor thenewtype ofgas
supply.Youcanfindthislabelinthepackageofthe
injectorssupplied withthe appliance.
Should the feeding gas pressure be different or variable
compared with the required pressure, an appropriate
pressure adjuster must be fitted on the gas supply pipe,
in compliance with the rules in force.
Adjustment of minimum level
Toadjust the minimum levelof the burners,proceed as
follows:
•Lighttheburner.
•Turn the knob on the minimum position.
•Removetheknob.
•With a thin screwdriver, adjust the by-pass screw
(see Fig. 8). If changing from natural gas to LPG,
completely tighten clockwise the screw, until a
smallregularflameisobtained.Ifchangingfrom
LPGto natural gas unscrewabout 1/4 turnthe by-
passscrew,untilasmallregularflameisobtained.
•Finally check the flame does not go out when
quicklyturningtheknobfromthemaximumposition
to the minimum position.
Thisprocedurecaneasilybecarriedout,anyhowthehob
has been positioned or built in the working top.
Fig. 7 FO 0392
Burner Ø By-pass
in 1/100
of mm.
Rapid 40
Semi-rapid 32
Auxiliary 28
Table 1 : By-pass diameters
Table 2 : injectors
Fig. 8
Adaptation to different types of gas
By-pass screws
TYPE TYPE OF INJECTORS NOMINAL REDUCED NOMINAL NOMINAL
OF GAS BURNER MARKS POWER POWER POWER PRESSURE
1/100 mm INPUT kW mbar
KW m3/h g/h
Rapid (large) 119 3,0 0,65 0,286 -
Semi-rapid (medium) 96 2,0 0,45 0,190 - 20
Auxiliary (small) 70 1,0 0,33 0,095 -
Rapid (large) 86 2,8 0,65 - 202
Semi-rapid (medium) 71 2,0 0,45 - 144 28-30/37
Auxiliary (small) 50 1,0 0,33 - 72
NATURAL
GAS
G 20
LPG
(Buthane/
Propane)
!!
!!
!
!!
!!
!

10
These hobs can be inserted in a built-in kitchen unit
whose depth is between 550 and 600 mm. The hobs
dimensions are shown in the relevant diagram.
The edge of the cut out must have a minimum distance
from the rear wall of 55 mm.
If there are side walls, or sides of the furniture unit near
the hob, the cut out edges must have a minimum
distance of 100 mm.
Hanging furniture units or hoods must be placed at 650
mm. minimum from the hob.
R = Rapid burner
SR = Semirapid burner
A = Auxiliary burner
P = Electric hotplate
Building In
SR
SR
A
R
580
500
P
SR
A
R
580
500
P
P
SR
A
580
500
Mod. EHM 6731 Mod. EHM 6722
Mod. EHG 671

11
Fitting the hob to the worktop
The hobs can be installed in a kitchen unit with an
opening for insertion whose dimensions are shown in
Fig. 9. To install the hob, proceed as follows:
1) Remove the pan supports, the burners caps and
crownsand turnthe hobupside down,taking care the
ignition candles are not damaged in this operation.
2) Place the sealing gasket (supplied with the hob) on
the edges of the cut out: place it exactly on the front
and rear edge, taking care that the sealings meet
withoutoverlapping;
3) Fix the hob with the relevant screws (Fig. 10). The
tractionof the screws isable to tracethe sealing, any
excess of which can be easily removed.
The edge of the hob forms a double labyrinth seal which
provides a total guarantee against infiltration of liquids.
Fig.9
Fig.10
a) Sealing gasket
Dimensions are given in millimeters
FO 2098
FO 0199
550
470
55 min.
30
a
A
B
B
A
YES NO
Fig.11
A) Fixing clamp
B) Connection cable
WARNING: Whensecuring thefixing clampnear
theterminal block,always ensurethe connection
cable does not come in contact with the edge of
the clamp (see Fig. 11).

12
a) Removablepanel
b) Space possibly useful for
connections
550 min.
560 min.
Fig. 12 Fig. 13
Fig. 15 Fig. 16
FO 1013 FO 0947 FO 0198
Kitchen unit with door
Proper arrangements must be taken in designing the
furniture unit, in order to avoid any contact with the
bottom of the hob which can be heated when it is
operated. The recommended solution is shown in Fig.
12.
The panel fitted under the hob should be easily
removable to allow an easy access if a technical
assistance intervention is needed.
Fig. 14
Kitchen unit with oven
The hob recess dimensions must comply the indication
given in Figs. 13 and 14 and must be provided with
brackets to allow a continuous supply of air.
Toavoid overhating, thebuilding inshould becarried out
as shown in Figs. 15 e 16.
The hob's electric connection and the oven's one must
be carried out separately, both for safety reasons and
to allow the oven to be easily taken off the unit.
Hanging furniture units or hoods must be placed at 650
mm. minimum from the hob (Fig. 17).
30
20 min
60
a
b
Possibilities for insertion
FO 0939 FO 0938
120 cm2
180 cm2360 cm2
50 cm2
650 mm
FO 2099
Fig. 17
470
30
591
380
140
595