Electrolux ERF37800X User manual

User manual
Manual de instrucciones
ERF37800X
Fridge-Freezer
Frigorifico-Congelador
Side-by-side
ENC74800

Wewerethinking ofyou
when we made this product
8183968-00/0

3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future. The Electrolux ambition is to offer
a wide variety of quality products that make your life more comfortable. You find
some examples on the cover in this manual. Please take a few minutes to study
this manual so that you can take advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering
Ease-of-Mind. Good luck!

4
The following symbols are used in this manual:
Important information concerning your personal safety and
information on how to avoid damaging the appliance
General information and tips
Environmental information
Scrapping old appliances
T
he symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the
shop where you purchased the product.

5
Safety instructions
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Your new fridge/freezer may have other
functions compared to your previous
one.
Carefully read these instructions to
learn how the appliance works and
how to care for it. Keep the instruction
booklet. It will come in handy if you
later sell the cabinet or give it to
somebody else.
These warnings are provided in the
interests of your safety. Ensure that
you understand them all before
installing or using the appliance. Your
safety is of paramount importance. If
you are unsure about any of the
meanings or warnings contact the
Customer Care Department.
For the User
· The refrigerator is intended for the
storage of foodstuffs and for the
production of ice for normal household
consumption in accordance with these
instructions.
· Do not keep explosive gases or
liquids in the refrigerator or freezer
compartment. They may explode and
cause injury and material damage.
· Do not let sharp objects come into
contact with the refrigerating system
on the back of and inside the cabinet.
If the refrigerating system is punctured,
the cabinet will be damaged and
foodstuff inside may spoil.
· Do not keep carbonised drinks or
bottles in the freezer compartment.
The glass bottles may break.
· The cabinet is heavy. The edges
and projecting parts of the cabinet
may be sharp. Be careful when moving
the cabinet and always use gloves.
Child Safety
· Pay attention so that small children
do not gain access to the operating
controls or the inside of the cabinet.
WARNING
Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING
Do not use mechanical devices or
other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
WARNING
Do not damage the refrigerant circuit.
WARNING
Do not use electrical appliance inside
the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.

6
Contents
Scrapping old cabinets 4...........
Safety instructions 5...............
Contents 6.......................
USE 7...........................
Control Panel 7...................
Use of the fridge compartment 8.....
Measuring the temperature 8........
Switching off 9....................
Alarms and other features 9.........
Use of the freezer compartment 10...
To the start the freezer and set the
correct temperature 10.........
Temperature inside the freezer 10....
Switching off 10...................
Freezing 11.......................
Suitable storage periods 12.........
Thawing 12.......................
Cabinet interior 12.................
HINT and TIPS 14.................
Saving energy 14..................
Food Storage 14..................
Protect the environment 14.........
MAINTENANCE and CLEANING 15..
Cleaning 15......................
Lighting 15.......................
Defrosting the fridge 16.............
Defrosting the freezer 16............
When the appliance is not in use 16..
SOMETHING NOT WORKING 16....
TECHNINICAL SPECIFICATION 19..
INSTALLATION 19.................
Mains Cable 19...................
Unpacking 19.....................
Remove the transport supports 19...
Cleaning 20......................
Installing the cabinet 20............
Door Reversal 21..................
Electrical connection 21............
Guarantee/Customer Service 22.....
European Guarantee 23............
www.electrolux.com 24............

7
USE
This cabinet is a combined freezer/freezer whereby both freezer/freezer
compartments are operated by the same compressor. This means that if the
fridge compartment becomes overloads it will result in even colder temperatures
in the freezer.
Position and clean the cabinet as explained in the section "Installation".
Check that the drain hose at the rear
of the cabinet discharges into the drip
tray.
Beforeinsertingthepower plugintothe
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 2 hours. Otherwise the
compressormay sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
Control Panel
ABCDEFGHIKLM
JN
-
++
--
ACTION FREEZE
ACTION COOL
A. Refrigerator power switch Switches the refrigerator on and off.
B. Temperature adjustment buttons/thermostat Used to set the temperature
(warmer).
C. Temperature display Shows the average temperature inside the refrigerator.
D. Temperature adjustment buttons/thermostat Used to set the temperature
(colder).
E. Yellow indicator lamp Lights when Action Cool is operating.
F. ACTION COOL button Used to switch the Action Cool feature on and off.
G. Freezer power switch Switches the freezer on and off.
H. Temperature adjustment buttons/thermostat Used to set the temperature
(warmer).
I. Temperature display Shows the highest temperature inside the freezer.

8
J. Temperature adjustment buttons/thermostat Used to set the temperature
(colder).
K. Yellow indicator lamp Lights when Fast Freeze is operating.
L. FAST FREEZE button Used to switch the Fast Freeze feature on and off.
M. Red warning lamp Lights when one of the alarms in the cabinet has been
triggered.
N. Alarm shut-off button Used to turn the audible alarm off.
Use of the fridge compartment
First switch on
Switching on:
Switchonthefridgebypressingthe
power switch.
+-
ACTION COOL
Setting the temperature
Press the buttons until the desired
temperature flashes in the temperature
display (The temperature can be set
between +2°C and +8°C.)
"+" raises the temperature.
"-" lowers the temperature.
+-
ACTION COOL
Allow the cabinet to run for a period of
24 hours whenever the temperature
setting is changed. This will allow the
temperature to stabilise inside the
cabinet.
It is not necessary to reset the
temperature when the cabinet is
switched on after it has been out of
use. The thermostat recalls the
previously set temperature.
Attention!
Difference between the temperature
displayed and temperature setting is
normal. Especially when:
- a new setting has recently been
selected
- the door has been left open for a
long time
- warm food has been placed in the
compartment.
A suitable temperature inside the fridge
is approx. +5°C. Storage temperature
in the cabinet is even on all of the shelf
levels.
+
+
+
+
--
--
--
--
Meat, fish and milk should be put in
the coldest part of the cabinet.
Measuring the temperature
If the temperature is measured using a
standard, single thermometer, this
should be put in a glass of water
centrally placed inside the cabinet.
This will reflect the temperature inside
the food products. Do not place the
thermometer hanging or lying directly
on the shelf.

9
Hints:
· Distribute foodstuffs to allow cold
air to circulate freely between the
products.
· Do not place food products directly
against the cooling plate on the rear
wall since they may freeze in this case.
· Also never put warm products into
the cabinet. Wait until they have
cooled down.
· Cover all foods properly to avoid
odours and flavours from tainting other
food.
Switching off
To switch off, push the ON/OFF
button. This will result in a countdown
from "3" to "1" taking place in the
temperature display. On reaching "1"
the fridge will switch off. The
temperature display will go off.
If the freezer is turned off, the
refrigerator will also turn off. E.g. while
defrosting the freezer.
Note:
The appliance cannot be switched on
or off if unplugged, or if there is no
power being supplied to it. Following
connection to the mains power supply,
the appliance returns to the same
operating state as before the
interruption of main power.
If the appliance is not going to be used
for an extended period:
1. Switch off the appliance, to do this
press the ON/OFF button.
2. Remove the mains plug.
3. Clean the appliance thoroughly (see
section: "Maintenance and Cleaning").
4. Leave door open to avoid
accumulation of odours.
Alarms and other features
Door open alarm
If the fridge door remains open for
more than 5 minutes, the red warning
lamp starts flashing and an audible
alarm sounds.
To switch off the alarm:
Press the "alarm shut-off button". The
red warning lamp goes out when the
door is closed.
Action cool
Use Action Cool to refrigerate a large
quantity of products. When Action
Cool is switched on, the temperature is
automatically set to +2°C.
"A" is then displayed in the
temperature display and the yellow
indicator lamp lights. After about 6
hours, Action Cool is switched off and
the temperature gradually returns to
the previously set temperature. It is
possible to switch off Action Cool
manually by pressing the Action Cool
button once more.
+-
ACTION COOL

10
Use of the freezer compartment
The freezer is provided with the symbol
whichmeansthatitis
suitable for freezing fresh food and for
long term storage of frozen and
deep-frozen food.
To start the freezer and set the correct
temperature
Switching on:
Switch on the freezer by pressing the
power switch.
-
+-
ACTION FREEZE
The alarm sounds if the temperature
inside the freezer reaches room
temperature. Turn off the alarm by
pressing the switch-off button.
-
+-
ACTION FREEZE
Setting the temperature
Press the buttons until the desired
temperature blinks on the temperature
display. (The temperature can be set
between -15°C and -24°C.)
"+" increases the temperature.
"-" decreases the temperature.
-
+-
ACTION FREEZE
Once set, the temperature display
shows the current temperature inside
the freezer.
Allow the cabinet to run for a period of
24 hours whenever the temperature
setting is changed. This will allow the
temperature to stabilise inside the
cabinet.
It is not necessary to reset the
temperature when the cabinet is
switched on after it has been out of
use. The thermostat recalls the
previously set temperature.
Temperature inside the freezer
To ensure that foodstuff will keep for a
long time, be sure that the temperature
inside the freezer is -18°C or below.
Please note, however, that the energy
consumption increases as the
temperature decreases.
The built-in temperature display shows
the warmest temperature inside the
freezer. If the temperature is measured
using a thermometer, put it between
the products since this will reflect the
real temperature in the frozen
products. It is normal that the built-in
temperature display shows a
temperature slightly above that
measured in other ways.
Switching off
To switch off, push the ON/OFF
button. This will result in a countdown
from "3" to "1" taking place in the
temperature display. On reaching "1"
the freezer will switch off. The
temperature display will go off.
Note:
The appliance cannot be switched on
or off if unplugged, or if there is no
power being supplied to it. Following
connection to the mains power supply,
the appliance returns to the same
operating state as before the
interruption of main power.
If the freezer is turned off, the
refrigerator will also turn off. E.g. while
defrosting the freezer.

11
Temperature alarm
If the temperature rises above -12°C,
the red warning lamp flashes and an
audible alarm sounds. The
temperature display will then start to
flash.
To switch off the alarm:
Press the alarm shut-off button to
switch off the audible alarm. The
temperature display will stop flashing.
The red warning lamp goes out when
the temperature inside the freezer
again falls below -11°C.
Find out what caused the alarm. See
the chapter "Something not working".
-
+-
ACTION FREEZE
11
Temperature memory
The temperature memory shows when
an alarm has been triggered in the
cabinet.
The temperature memory operates as
follows:
When the temperature inside the
freezer again falls below -11°C the
audible alarm stops. The temperature
display and the red warning lamp will
flashtoindicatethananalarmwas
triggered. When the alarm shut-off
button is pressed, the display then
displays the warmest temperature
inside the cabinet during the alarm
phase and the display stops flashing.
By referring to the temperature display
indication, it is possible to decide
whether or not to discard the products
inside the freezer.
-
+-
ACTION FREEZE
18
At about -12°C:
Most food products can be
immediately re-frozen. Ice cream is
especially sensitive to temperature
changes and should be consumed
as soon as possible.
At -9° - -2°C:
Food products should be prepared
(cooked)
prior to eating or re-freezing them.
However, always check the quality of
the food yourself to determine if it can
be frozen or if it must be discarded.
Freezing
Press the fast freeze button approx. 24
hours prior to placing the food in the
freezer.
You need not press the fast-freeze
button when freezing smaller quantities
of food during any 24-hour period.
Fast freeze is automatically switched
off apporox 50 hours after the button
has been pressed.
Fast freeze can be discontinued by
pressing the fast freeze button once
again.
-
+-
ACTION FREEZE
The yellow fast freeze lamp remains lit
as long as the fast freeze button is
engaged.
Practical advice on freezing
· When freezing products, use the
top shelves.
· Do not cover the air hole on the
rear wall.
· Spread out the products as much
as possible to allow air to circulate
between them.

12
· Do not place food products which
are to be frozen directly against other
frozen food. The heat from the
unfrozen food may cause the frozen
food to thaw on the surface.
· Once frozen, re-arrange the
products and put them as close as
possible to each other. The food will
then stay cold longer in the event of a
power failure.
· Do not freeze too much food at the
same time. The freezing capacity of
the unit is indicated in the
specifications section.
Check that the cabinet is operating
and keeps the set temperature one
day after switching it on for the first
time. Only after then should the freezer
be used to freeze fresh foodstuff.
Suitable storage periods
Food purchased in frozen condition:
Follow the advice on the maximum
storage period indicated on the
packaging.
Fresh food frozen at home:
Fatty and salty food should not be kept
frozen for more than three months.
Cooked food and low-fat food may be
kept up to about six months. Lean
food and berries can be kept for
approximately one year.
Thawing
It is best to thaw foods in refrigerator.
Place the foodstuff on a plate with a
raised edge to prevent liquids from
running out. Easily thawed foods can
be placed in room temperature or in
cold water. When using a microwave
oven to thaw foodstuff, follow the
manufacturer's instructions.
Cabinet interior
The shelves and door compartments
are removable and can easily be
re-arranged.
Certain shelves must be lifted up by
the rear edge to enable them to be
removed.
The lower door compartment and the
glass shelf above the vegetable drawer
must not be moved. They are fitted to
ensure air circulation inside the
cabinet.
Shelves with a raised edge should be
placed with the raised edge facing the
rear wall of the cabinet, and thus
prevent food products from touching
the cooling plate.

13
The vegetable drawer has two
moveable partitions with five different
choices in order to separate different
vegetables.
The vegetable drawer has a removable
ventilation edging to increase the
circulation of air and reduce the risk of
condensation.
Freezer drawers
The freezer drawers ensure that it is
quick and easy to find the food
package you want. To gain space, the
drawers can be removed and the
products can be put directly on the
shelves. On all shelves, except the top
shelf, it is possible to place products
that protrude 20 mm from the front
edge. This allows maximum use of the
available space.
Do not remove the bottom drawer. It is
required to assure proper air
circulation.
Removable shelves
There are the removable shelves inside
the freezer. Remove the shelf when
large food products need to be frozen.
Freezer tray
Use the freezer tray to freeze berries
and vegetables. After about 4 hours
the food will be thoroughly frozen and
can then be packaged normally. Food
that is frozen in this way will not stick
together, enabling you to use only the
amount required.
Ice cubes
Fill the ice tray to max. 3/4 since water
expands as it freezes. Release the ice
cubes by twisting the ice tray.
If ice cubes are kept for a long time,
they will dry out and the taste is
affected. Thus, throw away old ice
cubes and prepare new ones when
needed.

14
HINT and TIPS
Saving energy
· Pay careful attention to where the
cabinet is placed. See the section
"Installation". When installed correctly,
the cabinet will consume less energy.
· Try to avoid keeping the door open
for long periods, or opening the door
too frequently as warm air will enter the
cabinet, and cause the compressor to
switch on unnecessarily often.
· Ensure there are no obstructions
preventing the door from closing
properly.
· Thaw frozen food in the fridge. This
will ensure safer defrosting of foods
and reduce the work of the
refrigeration unit
· It is advisable to periodically clean the
refrigeration system at the back of the
appliance with a duster or vacuum
cleaner.
· Always leave warm food to cool
down to room temperature before
placing in the fridge.
· Food which is to be frozen (when
cool) should be placed in the fridge
before being transfered to the freezer.
· Avoid unnecessary frosting in the
cabinet by packing all foodstuffs into
airtight packages before placing them
in the freezer.
· Carefully follow the advice on freezing
products in the section "Using the
freezer". This will prevent wasting
energy.
· Do not set the temperature too low in
the freezer. A suitable temperature is in
the range of -18°C to -20°C .
· Make sure the door gasket is
complete and always clean.
Food Storage
·To obtain the best results from your
appliance, neither hot foods nor liquids
which may evaporate, should be
placed in the larder compartment.
·Avoid buying frozen food if you can
not store it straight away. The use of
an insulated container is advisable.
When you arrive home place the
frozen food in the freezer immediately.
·Ensure that food placed in the freezer
is dated and labelled and used in date
order to ensure that food is consumed
at its best. Remove suspect food from
you refrigerator and clean, refer to
cleaning and maintenance.
Protect the environment
· Hand over the cabinet packaging
and discarded fridges and freezers to a
recycling station. Contact your local
council or Environmental Health office
for more information.
· Keep foodstuff in re-usable
containers. Cut down on disposable
material as much as possible.
· When cleaning the cabinet, use a
mild washing-up detergent.
· Follow the advice in the section
"Saving energy"
· The door gasket and coolant used in
this cabinet will not harm the ozone
layer.
· All parts in the packaging can be
recycled.
· The cabinet has been designed for
easy dismantling and subsequent
recycling.

15
MAINTENANCE and CLEANING
Avoid opening the refrigerator door
during defrosting, as the cooling is off.
If the freezer is turned off, the
refrigerator will also turn off.
Cleaning
Clean the cabinet at regular intervals.
Disconnect the appliance from
electricity supply.
Internal Cleaning
Clean the inside and accessories with
warm water and bicarbonate of soda
(5ml to 0,5 litre water) Rinse and dry
thoroughly.
Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
Vegetable drawer.
Pull out drawer.
Lift it over the locks in back on the
sliding guides. Tip drawer downwards
and pull it out.
Clean whit soft detergent, and rinse
whit lukewarm water.
Assemble in reverse order.
Clean out the drip channel inside the
fridge at regular intervals and ensure
that the drip channel is clear at all
times. If blocked carefully clear using
a piece of flexible curtain wire inserted
into the drain outlet to remove the
blockage.
External Cleaning
Use water/neutral soap emulsion for
cleaning the surface of stainless steel,
anti-finger-print coated. Do NOT use
abrasive paste.
Wash the outer cabinet with warm
soapy water. Vacuum-clean under the
cabinet. Once or twice a year dust the
condenser (black grille) and the
compressor at the back of the
appliance, with a brush or vacuum
cleaner, as an accumulation of dust
will affect the performance of the
appliance and cause excessive
electricity consumption.
When moving the cabinet, lift it by the
front edge to avoid scratching the floor.
Lighting
The light is switched on automatically
when the door is opened.

16
Defrosting the fridge
The fridge is defrosted automatically
every time the compressor stops. Frost
formation can be prevented by:
· not putting warm foodstuff inside
the cabinet.
· avoiding frequently opening the
door or keeping it open too long.
Defrosting the freezer
Defrosting is not necessary.
Every 24 hours, the evaporator is
defrosted automatically.
Never use a hair drier or other heating
appliances to speed up defrosting.
Excessive heat may damage the
plastic interior, and humidity could
enter the electric appliance making it
live.
When the appliance is not in use
Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to
prevent unpleasant smells.
If the cabinet is to be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
SOMETHING NOT WORKING
Before contacting your local Service Force Centre check the following point:
Problem Possible cause / Remedy
““ is displayed in the
temperature display.
An error has occurred in measuring the
temperature. Call your service representative.
(The cooling system will continue to keep
food products cold, but temperature
adjustment will not be possible.)
Audible alarm + flashing red
warning lamp. (It is too warm
inside the freezer.)
Switch off the audible alarm by pressing the
alarm off button.
The audible alarm could have been triggered
by:
The cabinet having been recently switched
on and the temperature still being too high.
See the chapter "Switching on and setting
the temperature".
The door may have been open for so long
that the `door open' alarm was triggered.

17
It is too warm inside the
refrigerator. Set a lower temperature.
Put food products in the right place inside the
refrigerator. See the chapter "Temperature
inside the refrigerator".
Distribute the food products to allow cold air
to circulate around them.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
It is too cold inside the
refrigerator.
Set a warmer temperature.
Water comes out on the floor. Place the drain hose at the back of the
cabinet above the drain bowl. See the
chapter "Before using the cabinet the first
time".
It is too warm inside the
freezer.
Set a lower temperature.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
If warm food products have been put inside
the freezer, wait for a couple of hours and
then check the temperature again.
Distribute the food products to allow cold air
to circulate around them.
It is too cold inside the freezer. Set a warmer temperature.
Action Freeze could have been switched on.
The temperature display shows the highest
temperature inside the cabinet. Thus a
difference between the temperature indicated
on the display and the (average) temperature
measured in another way is normal.
Too much frost and ice are
produced.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
The compressor operates
continuously.
Set a warmer temperature.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.

18
The cabinet does not operate
at all. Cooling or interior light
does not operate. No indicator
lamps light.
The cabinet is not switched on.
Power does not reach the cabinet. (Try
connecting another electrical device to the
power outlet.)
The power plug is not properly connected.
Thefusehasblown.
Power failure Do not unnecessarily open the cabinet,
except when the power cut seems to be
long, in which case the food products should
be moved to another cabinet that works. If
the frozen products are still hard following the
power cut, they may be immediately refrozen.
If the food products have thawed but are still
fresh, they may be used, however they
should be prepared before re-freezing or
eating them.
Sound level in cabinet is too
high.
The refrigerating system will always produce
some sounds. A pulsing sound is heard when
coolant is pumped inside the cooling pipes.
A ticking sound from the thermostat can be
heard when the compressor switches on and
off. The sound level varies depending on the
operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the
cabinet do not touch each other. Carefully
bend them if they do.
If the cushion spacers (between the cabinet
wall and pipes) come loose, put them back in
place again.
Carefully follow the instructions in the chapter
"Installing the cabinet".

19
TECHNICAL SPECIFICATION
Model ERF37800X
Net capacity Refrigerator l 265
Net capacity Freezer l 83
Freezing capacity kg/24 h 10
Rising time h 11
Dimension mm
Width 2000
Height 595
Depth 600
INSTALLATION
Mains Cable
Do not remove the power cord by
pulling on its lead, particulary when the
product is being pulled out of its niche.
· Damage to the cord may cause a
short-circuit, fire and/or electric shock.
· In the event of damage to the
appliance's main cable, only an
authorised service company
recommended by the manufacturer or
a similarly qualified person may adjust
it in order to avoid shock hazard for the
user.
Unpacking
Unpack the cabinet and check that it
is in good condition and free of any
transport damage. Notify the dealer
immediately of any damage. Hand the
packaging over for recycling. For more
information, contact your local council
or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
Remove the transport supports
Removethetapeandthetransport
supports from
· the door sides
· inside the door hinges
·theshelves
Remove the transport support on the
glass shelf by pushing the support
forwardalongtheedgeoftheshelf
until it stops. Take hold of the rear
edge of the glass shelf and pull the
shelf and transport support forward
until the shelf tilts and the transport
support can be removed. Some
models are fitted with a silencing pad
under the cabinet. Do not remove this
pad.

20
Installation of distance
Assemble the attached distance on
the back side of the panel according to
the illustration.
Cleaning
Wash the inside of the cabinet using
lukewarm water, a mild washing-up
detergentandasoftcloth.
Installing the cabinet
Make sure that the power plug is not
squashed or damaged by the back of
the product.
· A damaged power plug may
overheat and cause a fire.
Do not place heavy articles or the
product itself on the power cord.
· there is a risk of a short circuit and
fire.
If the power plug socket is loose, do not
insert the power plug.
· there is a risk of electric shock or fire.
To obtain the best performance from the
cabinet, ensure:
· the cabinet is placed in a dry, cool
place and is not exposed to direct
sunlight.
· the cabinet is not placed close to a
source of heat, e.g. a cooker or
dishwasher.
· the cabinet is level. The cabinet
should not lean against any wall. If
necessary adjust the feet using the
adjustment spanner supplied.
· there is good air circulation around
the cabinet and that the air channels
below and behind the cabinet are not
blocked. The ventilation space above
the cabinet must be at least 4 cm.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cupboard.
In this case, the space behind the
cupboard must be at least 50 mm deep.
50mm
a) b)