Electrolux W465H User manual
Operating manual
W465H, W475H/M, W485M, W4105H/M, W4130H/M,
W4180H/M, W4240H, W4250M, W4300H, W4330M,
W4280X, W4350X
Clarus Control
438 9213-61/EN
08.37
3
Contents
Contents
Safety precautions ....................................................................................... 5
Procedure for use......................................................................................... 7
Preparations ............................................................................................ 8
The ”Move back” key .............................................................................. 9
To start the wash program....................................................................... 9
To start a wash program from the program library................................ 13
To change parameters in the current program step .............................. 16
Rapid advance....................................................................................... 17
Show weight.......................................................................................... 19
No water reduction................................................................................ 20
Pause..................................................................................................... 21
Manual operation during a program...................................................... 22
Text ........................................................................................................ 28
To change the wash program after program operation has
commenced........................................................................................... 29
To change temperature.......................................................................... 30
Auto restart............................................................................................ 31
Manual operation ....................................................................................... 32
To select manual operation ................................................................... 32
Motor/door ............................................................................................ 33
Water/drain ............................................................................................ 34
Heating .................................................................................................. 35
Detergent signals and water flushing .................................................... 36
Statistics .................................................................................................... 37
To select statistics ................................................................................. 37
Resetting statistic registers ................................................................... 39
Memory card.............................................................................................. 55
General indtroduction........................................................................... 55
To select the ”Memory card” function .................................................. 56
To run a wash program straight from a memory card ........................... 59
To copy a program from a memory card to the machine’s program
control unit............................................................................................. 60
To copy a program from the program control unit to a
memory card ......................................................................................... 63
To delete a program on a memory card ................................................ 66
To delete all programs on a memory card............................................. 67
Maintenance............................................................................................... 69
Daily....................................................................................................... 69
Every month .......................................................................................... 69
Every third month .................................................................................. 69
Service information – fault tracing......................................................... 70
Cleaning the mop elements................................................................... 71
The manufacturer reserves the right to make changes to design and
component specifications.
5
Safety Precautions
All external equipment which is connected to the machine must be CE/EMC-approved
and connected using an approved shielded cable.
Safety Precautions
The machine is only intended for water-wash use.
Do not allow minors to use the machine.
Do not hose down the machine with water.
The machine's door lock must under no circumstances be bypassed.
If the machine develops a fault, this must be reported to the person in charge as soon
as possible. This is important both for your safety and that of others.
The machine is not intended to be used by people (including minors) with reduced
physical or mental capacity or lack of experience and knowledge. Such people must
be instructed in the use of the machine by a person who has responsibility for their
safety. Minors must be supervised to ensure that they do not play with the machine.
6
3657
7
1
Procedure for use
Procedure for use
This washer extractor is controlled by a microprocessor-based program
control unit. There are many advantages to this equipment, including:
• timing, levels and temperatures are controlled with great precision and
flexibility
• detailed information on wash programs, machine status and operations,
wash times and temperatures can be accessed in plain language on the
large display screen
• it is possible for the user to create new wash programs, and to adapt
programs precisely on the basis of experience and to suit various types
of textile, degrees of soiling etc.
• a very high level of machine safety through continuous monitoring and
built-in safety interlocks
• the program control unit has a reader for ”memory cards”. These are
cards the size of a credit card which contain a memory chip. Memory
cards allow the user to:
- transfer wash programs between a PC and the washer extractor, or
from one washer extractor to another
- run programs straight from a card
•great flexibility during program operation:
- rapid advance both forwards and backwards in the program
-change temperatures, program module lengths and extraction
speeds directly, during program operation
- start a different program at any time during program operation.
1
4115 3651
The ”Move back” key
By pressing this key repeatedly you can move back-
wards through the menus you have navigated th-
rough. This will always bring you back to the menu
illustrated here.
The functions of these keys change, depen-
ding on which menu or part of a menu you
are using. Their current functions at any time
are shown on the display immediately above
each key.
Numeric keyboard Card reader for ”memory cards”
Display screen
8Procedure for use
2
5343
2
1
34
2
Preparations
• Sort the load, paying attention to the textile
care labels on the items. Empty all pockets
and do up zip fasteners.
• Open the machine door, check that the drum
is empty, load the items into the machine and
close the door.
• Check that the emergency stop button has
not been pressed inwards (see ”Machine
safety”).
Measuring the detergent
Compartment 1 – pre-wash, powder or liquid
detergent
Compartment 2 – main wash, detergent powder
Compartment 3 – softener
Compartment 4 – main wash, liquid powder
9
Procedure for use
The ”Move back” function
Each press of the ”Move back” key moves you
back one menu, in reverse order. By pressing this
key repeatedly you can return to this menu at any
time:
If this menu is not currently
displayed:
Press arepeatedly.
If ”GO TO THE MENU” is
highlighted:
Press c.
When ”RUN A WASH PRO-
GRAM” is highlighted:
Press SELECT.
To start the wash program
3580
The ”Move back” key
If you find you are in the
wrong place, or if you want
to undo earlier key presses:
Press the ”Move back” key
one or more times.
3627
Two ways of starting a program
By entering the actual program number
Enter the actual program number if you know it,
then press SELECT.
By starting from the program library
(see section ”To start a wash program from the
program library)
If you are unsure about the programs available,
you can select a program from the program
library, where the programs are listed with their
descriptions.
10
Procedure for use
If you have entered the wrong number
Enter the correct number to overstrike the earlier
one.
Note: you must always enter three digits, even
when the number is really only a one or two-digit
number.
Examples:
The program number required is 9. Enter 009 to
overstrike all digits in the wrong number.
The program number required is 19. Enter 019 to
overstrike all digits in the wrong number.
3581 A
If you have a memory card in
the program control unit, and
the program you selected is
both on the memory card and
in the PCU, you will be asked
”FROM CLS OR SMC?”.
Press CLS if you want to
take the program from the
PCU.
Press SMC if you want to
take the program from the
memory card.
In some of the text shown on
the display, Clarus Control is
referred to as CLS and the
memory card is referred to
as SMC.
Memory cards
A memory card is a plastic card, the size of a credit
card, with an electronic memory chip inside it. This
card is capable of storing 10 to 15 wash programs
of normal size. If the programs are mostly small
ones, more of them can be stored, whereas larger
programs will reduce the number which can be
held by the card. Memory cards of this type can be
used to:
• transfer wash programs from one washer ex-
tractor to another
• run wash programs straight from the card
•transfer wash programs from a PC to a memory
card and from a memory card to a PC (these
procedures, and how to write a wash program
on a PC, are described elsewhere).
Memory cards are described in detail in the section
entitled ”The Memory card”.
4031 A
Here you can select programs
from the program libraries.
See the section entitled ”To
start a wash program from
the program library”.
Displayed here will be the
number of the most fre-
quently used program. S993
would indicate the number of
a program on a memory card.
Press this key if you want to
select this program.
Use the numeric keys to
enter the program number
Press SELECT.
11
Procedure for use
Program name
Delayed start time (hrs:
mins)
2 Delayed start
Use the numeric keys
to enter a time (max. 99
hrs). This parameter ap-
pears on the right of the
display.
Press START.
3582
Delayed start
Delayed start means that the machine will not
start the wash program until the time entered has
elapsed.
This function allows you, for example, to load the
machine in the evening, but delay the start of the
wash until early the next morning, to end in time for
the next shift.
Time left before the
machine is to start
Choose 1 or 2:
1 To start the program now:
Press START.
Pressing ”Text” displays more information
The text displayed is a description of the wash
program selected. This text description is inserted
when a new wash program is created. This proce-
dure is described fully in the programming manual.
If you want to cancel the
delayed start:
Press EXIT
If you want to see the de-
scription of the program:
Press TEXT .
During a wash program:
Press ato
make the machine pause
during the wash program.
3627
Two ways of pausing during a wash program
There are two ways of pausing during a wash pro-
gram:
1 By pressing a.
2 As an additional function. This is described in
section ”Pause”.
12 Procedure for use
To change parameters in the current program
step
See section ”To change parameters in the cur-
rent program step”.
Certain program step parameters can be altered
during the course of the program. In the example
(left), the length of the program step and the heating
temperature can be altered.
3583
The following information is
displayed during the wash
program:
Current program step
Time left for this program
step
Set temperature
Actual temperature
Remaining program time
Drum speed
To terminate a program before it has finished
• Select RAPID ADVANCE and press SELECT.
Advance to ”END OF PROGRAM” and press
SELECT.
• Wait until ”THE DOOR IS OPEN” appears on the
display.
• Now the door can be opened.
Press SELECT.
If required:
Select a function using the
cursor keys.
Additional functions during the program
Rapid advance (see section ”To change parameters
in the current program step”)
Rapid advance through the program to the program
step required. Rapid advance can be used to move
both forwards and backwards through the program.
Display weight (see section ”Display weight”)
The actual load weight is shown in large digits on the
display (weight display mode). (On machines with
weighing equipment only.)
No water level reduction (see section ”No water
level reduction”)
Machines with weighing equipment installed adjust
the water level automatically according to the load
weight. This function lets you switch off water level
reduction during the current program.
Pause (see section ”Pause”)
The machine stops. The drain valve remains closed.
Another way to pause the program: Press a.
Manual functions (see section ”Manual operation
during a program”)
The following functions can be controlled manually
during the course of the program:
- all water valves, drain and pumps (where
applicable).
- limit highest extraction speed.
- motor on/off after end of wash program.
- flush detergent.
Text (see section ”Text”)
Display description of wash program (if available).
Select a different wash program (see section ”To
change the wash program after program opera-
tion has commenced”)
You can switch to using a different wash program
at any stage during the wash. Once this function
has been selected, the current step (for example,
rinse) of the earlier program will be allowed to
finish and then the new program will start (from
the beginning).
Change temperature scale °C or °F (see section
”To change temperature scale °C/°F”)
Auto restart (see section ”Auto restart”)
Here you enter the number of times you wish the
wash program to restart automatically.
13
Procedure for use
To start a wash program from the program library
3580
What is the program library?
The program library lists all wash programs, both
user and standard programs, showing their pro-
gram numbers and a description, for example:
1 MY OWN 40 °C
2 MY OWN 60 °C
3 MY OWN 90 °C
991 NORMAL 95°C STD
992 NORMAL 60°C STD
993 NORMAL 40°C STD
994 INTENSIVE 95°C
995 INTENSIVE 60°C
996 PERM. PRESS 60°C
997 PERM. PRESS 40°C
998 LOW EXTRACT 1 MIN
999 HIGH EXTRACT 5 MIN
Each time a new program is stored in the machine
program memory, its number and description will
be inserted automatically into the program library.
The program library may be used for starting a
wash program, but is also used in programming,
when a wash program needs to be modified or if
a new program is to be created on the basis of an
existing one.
If this menu is not currently
displayed:
Press arepeatedly.
If ”GO TO THE MENU” is
highlighted:
Press c.
When ”RUN A WASH PRO-
GRAM” is highlighted:
Press SELECT.
14
Procedure for use
To select a program from the
PCU program library:
Press CLS.
If there is a memory card in
the PCU and you wish to
select a program on that:
Press SMC.
4031 A
Select library via menu
You can also select the program library via the
option ”GO TO THE MENU”. Then select ”WASH
PROGRAM LIBRARY”.
3590
Press bthe required
number of times...
...to highlight the wash
program required.
Press SELECT.
3591
15
Procedure for use
Program name
Delayed start time (hrs:
mins)
Press START.
3582
Delayed start
Delayed start means that the machine will not
start the wash program until the time entered has
elapsed.
This function allows you, for example, to load the
machine in the evening, but delay the start of the
wash until early the next morning, to end in time for
the next shift.
Time (in hours and minu-
tes) left before the machi-
ne is to start.
2 Delayed start
Use the numeric keys
to enter a time (max. 99
hrs). This parameter ap-
pears on the right of the
display.
Choose 1 or 2:
1 To start the program now:
Press START.
If you want to see the de-
scription of the program:
Press TEXT
Pressing ”Text” displays more information
The text displayed is a description of the wash
program selected. This text description is inserted
when a new wash program is created. This proce-
dure is described fully in the programming manual.
OIf you want to cancel the
delayed start:
Press EXIT.
The functions which are avai-
lable during program opera-
tion are described in sections
”To change parameters in the
current program step - Auto
restart”.
16
Procedure for use
Press cone or more
times...
...to highlight the line re-
quired.
3584
To change parameters in the current program step
During program operation the
display will look like this (see
section ”To start the wash
program”).
Use the numeric keys to
enter the new parameter .
Press SELECT.
If you have entered the wrong parameter
Continue pressing numeric keys to overstrike the
incorrect parameter.
Note: always use the same number of digits as
used on the display to overstrike the incorrect
parameter.
Example:
To change the time for the program step to 30 se-
conds, enter 030 to overstrike the earlier parameter.
Press SELECT.
You can alter the following program steps:
Prewash, Main wash, Rinse, Drain, Soak
Length of program step (max. 9998 seconds),
heating temperature (max. 97°C).
Extraction
Length of program step (max. 3599seconds),
extraction speed.
17
Procedure for use
During program operation the
display will look like this (see
section ”To start the wash
program”).
Check that ”RAPID AD-
VANCE” is highlighted.
3583
If it is not highlighted:
Press cor bone or
more times to highlight
”RAPID ADVANCE”.
Press SELECT.
Rapid advance
To terminate a program before it has finished
• Select RAPID ADVANCE and press SELECT.
Advance to ”END OF PROGRAM” and press
SELECT.
• Wait until ”THE DOOR IS UNLOCKED” appears
on the display.
• Now the door can be opened.
18 Procedure for use
3586
Automatic return to normal display
Once you have selected any of the functions below,
you must make any changes required within 20
seconds. If no further keys are pressed within 20
seconds, the display will revert automatically to its
normal appearance during a wash program.
Rapid advance works in both directions
Rapid advance works in both directions, using b
and c.
Using rapid advance to move forwards allows you
to skip one or more program steps. Using rapid ad-
vance backwards allows you to repeat one or more
program steps.
Press SELECT.
Press bor cone or
more times to highlight the
program step you wish to
advance to.
19
Procedure for use
Show weight
The actual weight is shown in large digits on the display
(weight display mode).
If the weighing equipment is not connected, the error
message “FUNCTION NOT ALLOWED” will appear. See
the section “Fault-finding, weighing equipment” in the
machine manual.
During program operation
the display will look like
this (see section ”To start
the wash program”).
Press cor bone or
more times to highlight
”SHOW WEIGHT”.
Press SELECT.
4775
4774
Return to normal display
The display will return to normal at the end of the ”time
for weight display” set as a parameter in Settings 1. The
manufacturer’s default parameter is 20 seconds.
Show weight
For machines with weighing equipment installed only!
Weight display mode:
The actual net weight is
shown in large digits on
the display.
To end weight display sooner
Press aor use the numeric keys to enter a new
program number.
20
Procedure for use
No water reduction
During program operation
the display will look like
this (see section ”To start
the wash program”).
Press cor bone or
more times to highlight
”NO WATER REDUC-
TION”.
Press SELECT.
4776
No water reduction
The wash load is weighed during the program and the
water level is adjusted automatically according to its
weight. If the load is not a full one, the water level will
be reduced according to a water level reduction table.
You can switch off water level reduction at any stage of
a program.
Note that if you select ”NO WATER REDUCTION”, this
applies only to the program currently running. The next
time a program is started, water level reduction will oc-
cur automatically again.
For machines with weighing equipment installed only!
Other manuals for W465H
4
This manual suits for next models
15
Table of contents
Other Electrolux Washer manuals
Electrolux
Electrolux EWF 12270W User manual
Electrolux
Electrolux EIFLW55H MB User manual
Electrolux
Electrolux EWF 1470 User manual
Electrolux
Electrolux EWS 31064 NU User manual
Electrolux
Electrolux EWT 600 User manual
Electrolux
Electrolux EW 1548 F Quick guide
Electrolux
Electrolux EWF1294DSW User manual
Electrolux
Electrolux WP4 700H User manual
Electrolux
Electrolux EWT1075H2WA User manual
Electrolux
Electrolux WE 170 P User manual
Electrolux
Electrolux EW 813 F Quick guide
Electrolux
Electrolux EIFLS60LSS0 User manual
Electrolux
Electrolux EW 924 T User manual
Electrolux
Electrolux EWT1574M7SA User manual
Electrolux
Electrolux EWF12853 User manual
Electrolux
Electrolux EWF 1073 User manual
Electrolux
Electrolux EWG 14750 W User manual
Electrolux
Electrolux EWS 126410 W User manual
Electrolux
Electrolux EWF1023BEWA User manual
Electrolux
Electrolux EW 757 F User manual
Popular Washer manuals by other brands
Hotpoint Ariston
Hotpoint Ariston ECOT7F 1291 Instructions for use
Daewoo
Daewoo DWD-FD1411 Service manual
Siemens
Siemens Viva WW10A00GB Instructions for installation and use
Fisher & Paykel
Fisher & Paykel IWL12-96154B installation instructions
LG
LG F1255FDS27 owner's manual
Arctic
Arctic APL61024XLWB user manual