ELECTRONIC DISPLAYS EDV225MPC-2L-N1-GR-IR User manual

ELECTRONIC DISPLAYS INC.
135 S. CHURCH STREET
ADDISON, ILL. 60101
www.electronicdisplays.com
EDV225MPC-2L-N1-GR-IR
Parts List:
•EDV225MPC-2L-N1-GR-IR
Qty: 1
•IR remote
Qty :1
•Photo-Eye with Reflector
Qty :1

Programming the display
To preset a value to the display, follow the guide below for the line that you want to set.
The “SET” key is similar to “ENTER” and will be the main key to use.
Target / Goal:
1. Press the SET button to enter edit mode. The least significant digit’s decimal
point will flash on and off.
2. Enter the numeric value you want to display.
3. Input the desired numeric value.
4. Press SET when complete.
5. Press WORK to activate the display and start working.
Actual:
1. The ACTUAL line will increment by one every time the photo-eye is activated.
2. To enter a preset value on the second line, press the SET button to enter
edit mode. The least significant digit’s decimal point will flash on and off.
3. Input the desired numeric value.
4. Press SET when complete.
Changing increment time to increment (ACTUAL line)
Note: the top line is factory shipped at a fixed number.
1. Press the SET button 5 times to get to the top line showing “XXX.X”. For a fixed
number on ACTUAL, leave at “000.0”. To set the ACTUAL to increment by 1 every
10 seconds, “001.0”. To count by one every minute, “006.0”.
2. Press SET when complete.
Changing increment count (TARGET line)
Note: the top line is factory shipped to increment by one. To change the increment value
(example count by 5 for every photo-eye activation).
3. Press the SET button 4 times to get to the TARGET line showing “n = XX”, where
“XX” is the count. For a fixed number on ACTUAL, leave at “01”. To set the ACTUAL
to increment by 5, “05”. To count by 15 for every pulse, “15”.
4. Press SET when complete.

Photo-Eye setup
The display includes a Photo-Eye and a reflector. The Reflector must be mounted directly
across from the Photo-Eye in the direction that it is pointing.
The photo-Eye emits an infrared beam that reflects off the reflector plate. Each time that the
beam is broken, the Actual line on the display will increment.
_____________________________________________________________________
Please visit our website for more information:
www.electronicdisplays.com
Or Call: 1-800-367-6056
Or Our Support Website:
http://edisupport.helpserve.com/