KWIK GOAL 2B3004 User manual

NZ299 Rev. 07/17/17
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2005, Rev 2017 Kwik Goal Ltd.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Base (2)
(Part# UZ753)
69-3/4”
Crossbar Corner (4)
(Part# UZ810)
Post Corner (2)
(Part# UZ811)
Right Post (1)
(Length)
ASSEMBLY INSTRUCTIONS FOR 2B3004, 25B6204, & 25B704 DELUXE EUROPEAN CLUB GOAL
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify trucking company immediately. Lay out all parts. Remove all cardboard and packaging immediately.
Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NOTE: Components may be packaged in one or more additional boxes.
Crossbar (2)
(Length)
Model#
Part#
Length
2B3004
UZ1083
213-3/4”
25B6204
UZ1229
208”
25B704
Left Post (1)
(Length)
deluxe euro
club goal
6.5' x 18.5' x 2' x 7'
2B3004
SERIAL #:
140 PACIFIC DRIVE QUAKERTOWN, PA 18951
MANUFACTURED BY: 800.531.4252
This goal meets all safety requirements of: ASTM F2056-09 (US), CEN EN 748 (EU),
and The Football Association Guidance Notes (UK)
DATE MANUFACTURED
DAY
MONTH YEAR
ID STICKER
Model#
Part#
Length
2B3004
UZ1488
66-3/4”
25B6204
UZ1480
60-3/4”
25B704
UZ1484
66-3/4”
Model#
Part#
Length
2B3004
UZ1489
66-3/4”
25B6204
UZ1481
60-3/4”
25B704
UZ1485
66-3/4”

NZ299 Rev. 07/17/17
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
1998 rev 2009 Kwik Goal Ltd.
IMPORTANT GOAL SAFETY INSTRUCTIONS
READ CAREFULLY
1. Check for structural integrity and proper connecting hardware before every
use. Replace damaged or missing parts or fasteners immediately.
2. Safety/Warning labels must be clearly visible.
3. Securely anchor moveable soccer goals at ALL times.
4. Always instruct players, managers, coaches, trainers, teachers, maintenance
workers and all other personnel who might come in contact with the goal,
on the safe handling of and potential dangers associated with moveable
soccer goals.
5. Always exercise extreme caution when moving goals and provide adequate
manpower to move goals of varied sizes and weights. Moveable soccer goals
should only be moved by authorized personnel.
6. NEVER allow anyone to climb on the net or goal framework.
7. Moveable soccer goals should only be used on LEVEL fields, NEVER on a
slope or hill area.
8. Remove nets when goals are not in use.
9. Most tip-over injuries occurr when goals were unattended. Anchor or chain
one goal to another or to nearby fence posts, dugouts, or any other similar
sturdy fixture when not in use. If this is not practical, store moveable soccer
goals in a place where children cannot have access to them.
10. Fully disassemble goals for seasonal storage.

NZ299 Rev. 07/17/17
Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
3/8“ x 1 3/4” Hex Bolt (Part# TZ227) (28)
3/8" x 7/8" Hex Bolt (Part# TZ249) (6)
3/8“ Lock Washer (Part# TZ65) (30)
3/8“ Flat Washer (Part# TZ60) (34)
3/8” Lock Nut (Part# TZ197) (4)
3/8" Square Nut (Part# TZ247) (6)
5/16" Eyebolt (Part# TZ270) (2)
5/16" Flat Washer (Part# TZ269) (2)
5/16” Lock Nut (Part# TZ5) (2)
Assembly Tools
1/2”, 9/16” & 3/4”
Wrenches
9/16
Ratchet with
1/2”, 9/16” & 3/4”
Sockets
Scissors
AND
Post Braces (2)
(Part# UZ737)
Channel Spacer (12)
(Part# UZ812)
Backstay Brace (2)
(Part# VZ328P2)
Net (1)
(Part# 3B6824)
Net Strap (1)
(Part# 10B4404 Pk of 2)
Backstay (2)
(Part# VZ329P1)
Ground Anchor (4)
(Part# 10B103 Pack of 4)
Net Clip (80)
(Part# 10B3101 Pack of 100)
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.

NZ299 Rev. 07/17/17
Post Corner
Crossbar Corner
3. Attach posts to crossbar corner and post corner as shown. Be sure connections are pressed firmly together
before tightening hex bolts.
Note: Square nuts will float loose in net channel until step 6.
Left Post
KWIKGOAL sticker
Warning sticker
Post Corner
Post Brace
3/8” X 1 3/4”
Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Channel Spacer
Post
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Crossbar Corner
3/8” X 1 3/4” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Left Post
Square Nut
Channel Spacer
Square Nut

NZ299 Rev. 07/17/17
3/8” X 1 3/4” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Crossbar Corner
Channel Spacer
Base
3/8” X 1 3/4” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Crossbar
Crossbar
Base
Base
Crossbar Corner
Crossbar Corner
4. Assemble post and bases to crossbar as shown. Be sure connections are pressed firmly together before
tightening hex bolts.
NOTE: Square nuts will float loose in net channel until step 6.
Channel Spacer
3/8” Flat Washer
3/8” Lock Washer
3/8” X 1 3/4“ Hex Bolt
Crossbar
Right Post
Square Nut
Left Post
Right Post
Crossbar
Warning sticker
KWIKGOAL sticker
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.

NZ299 Rev. 07/17/17
Crossbar
Right Post
Left Post
Crossbar
Base
Base
Lift
Lift
12"
Minimum
Temporary
3/8" X 7/8" Hex Bolt
Spacers (metal)
Threaded Channel
Left and Right Bases
For 10B410 wheel option only
5. NOTE: If installing optional wheels (Part# 10B410), insert threaded channel spacers from wheel option
package in each base. To prevent threaded channel spacers from falling out during assembly, temporarily
insert a 3/8” hex bolt into the last threaded channel spacer and finger tighten. Lift assembled bases and insert
into assembled posts. Be sure connections are pressed firmly together before tightening hex bolts.
3/8" X 1-3/4"
Hex Bolt
Lock Washer
Flat Washer
Post
Post Brace
Base
Channel Spacer
(plastic)
Flat Washer
Lock Washer
3/8" X 1-3/4"
Hex Bolt
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.

NZ299 Rev. 07/17/17
Ground
Anchor Holes
Base
Left Post
Crossbar
3/8” Lock Nut
3/8” X 7/8” Hex Bolt
3/8” Lock Washer
Backstay Brace
3/8” Square Nut
3/8” Square Nut
3/8” Square Nut
Backstay
3/8” Flat Washer
5/16” X 1 1/2” Eyebolt 5/16” Flat Washer 5/16” Lock Nut 3/8” X 1 3/4”
Hex Bolt
3/8” Flat Washer
6. Remove 3/8” hex bolts used to temporarily secure channel spacers in bases. Attach backstays and backstay braces
to square nuts as shown.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Crossbar
Ground
Anchor Holes
Right Post
Base

NZ299 Rev. 07/17/17
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
7. Set goal onto bases in desired location and mark anchor hole locations. Move goal and dig holes a minimum
of 24” in diameter and 20” deep. (NOTE: Areas subject to heavy ground frost may go as deep as 36”.) Attach
ground anchors to assembled goal. Set goal in desired installation location with anchors in holes, fill holes as
shown, surrounding anchors with concrete. Make sure goal is plumb and level and let concrete cure.
Up - Arch
Down - Bow Left Post
Cause
Bow in Crossbar
Cause
Arch in Crossbar
Crossbar
Right Post
Cause
Arch in Crossbar
Cause
Bow in Crossbar
Stone
Ground
Anchor
12 3/4“
20“
Minimim
24“ Dia.
Concrete
Anchoring Detail
1/2“ X 4” Hex Bolt
1/2” Flat Washer
1/2“ X 4” Hex Bolt
1/2” Flat Washer
Ground
Anchor
Ground Anchor

NZ299 Rev. 07/17/17
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
- Distribute total amount
of weight evenly between
each back corner.
- Always fasten weight to
goal with straps or hardware.
8. The ground anchor and chain leash system supplied is the
recommended and the safest method of anchoring your
goal. However, counterbalance weight may be used as a
temporary anchoring system. A minimum of 240 lbs. must
be placed on the back bottom bar for the goal to be
stabilized. Test anchoring in accordance with step 9.

ANCHOR TEST
1. Clear all persons from a minimum 50 foot radius surrounding the goal.
2. Verify goal is attached to anchors according to instruction.
3. Apply a horizontal pull force of 247 lbs. to the center of the crossbar for 60 - 70 seconds.
Full safety precautions must be taken while performing test.
4. If goal overturns during application of force or does not return to an upright position after removing force, an
alternate anchoring system must be used
9. After installing, test as described below to verify effectiveness of anchor system. If applicable, allow concrete
to fully cure before testing.
Crossbar
247 lbs.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ299 Rev. 07/17/17