Elfa Platinum & Slate Movable Standing Desk Product information sheet

Your Customized Instructions for Easy Installation & Assembly
We know you will be amazed with the ease of installing elfa. If at any time during installation you have questions,
call the store listed on your receipt or 1-800-733-3532. You may also visit containerstore.com/installation to view
video instruction.
Tools needed for the space:
Plastic mallet
Products needed for the space:
(Qty 2) Narrow Crossbar Platinum
Set of 4
(Qty 2) 10-Runner Panels Platinum
Set of 2
(Qty 2) Narrow Mesh 1-Runner
Platinum
(Qty 6) Narrow Mesh 2-Runner
Platinum
(Qty 2) Narrow Mesh 3-Runner
Platinum
These instructions are only for the items you purchased.
1. Getting Started
It's best to assemble an elfa Drawer Unit on a hard surface such as a concrete floor. If
you are unable to do so, you must protect your floor surface.
•
If you don't have a plastic mallet, you can use a hammer with a wood block to
protect the frame.
•
Visit containerstore.com/installation to watch elfa Installation and Assembly
Videos.
Malmo Nilsson Standing Desk on Casters Slate & Platinum Space # 6004745
Page 1 of
4

2. Drawer Units
Tools needed for this section:
Plastic mallet
Products needed for this section:
(Qty 2) Narrow Crossbar Platinum
Set of 4
(Qty 2) 10-Runner Panels Platinum
Set of 2
(Qty 4) Drawer Back Stop Pins
Galvanized Pkg/10
(Qty 2) Narrow Mesh 1-Runner
Platinum
(Qty 6) Narrow Mesh 2-Runner
Platinum
(Qty 2) Narrow Mesh 3-Runner
Platinum
If you don't have a plastic mallet, you can use a hammer with a wood block
to protect the frame.
If combining drawer units, skip the following steps and continue with the
instructions for Combining Drawer Units.
Assemble a Drawer Unit
Step 1
Position the side panels so the frame runners face inward, with the bottom of each
panel facing up.
•
Using a plastic mallet, tap the bottom T-crossbars into the bottom of each side panel.
•
Turn the partially built unit over so it is standing right side up.
•
Malmo Nilsson Standing Desk on Casters Slate & Platinum Space # 6004745
Page 2 of
4

Step 2
If using Back Stop Pins, install them in the back holes of the top runners before inserting
the top L-crossbars.
•
Step 3
Tap the top L-crossbars completely into each side panel.
•
Step 4
Insert remaining Back Stop Pins
•
Slide in Drawers.
•
If not combining Drawer Units, you will skip the instructions below.
Assemble a Combined Drawer Unit
Step 1
Begin by assembling the top Drawer Unit.
•
Position the side panels so the frame runners face inward, with the bottom of each
panel facing up.
•
Using a plastic mallet, tap the bottom T-crossbars into the bottom of each side panel.
•
Turn the partially built unit over so it is standing right side up.
•
Step 2
If using Back Stop Pins, install them in the back holes of the top runners before inserting
the top L-crossbars.
•
Step 3
Tap the top L-crossbars completely into each side panel.
•
Step 4
Assemble the bottom frame, omitting the top L-crossbars.
•
If using Back Stop Pins, insert them in the back holes of the top runners of the bottom
frame.
•
Step 5
Lower the top frame onto the bottom frame, making sure the Back Stop Pins are all on
the back side. Secure by firmly tapping each corner of the top frame until the bottom
T-crossbars are completely inserted into the bottom frame
•
Malmo Nilsson Standing Desk on Casters Slate & Platinum Space # 6004745
Page 3 of
4

Step 6
Insert remaining Back Stop Pins.
•
Slide in Drawers.
•
The Drawer Units are now assembled and combined. To complete your Drawer Unit,
follow the instructions listed in the Drawer Unit Accessories section.
Congratulations! Your elfa solution is now complete! Thank you for your purchase and we look
forward to seeing you again soon. Now that you have a fabulously organized elfa space, share it
with us on Facebook at facebook.com/containerstore.
Malmo Nilsson Standing Desk on Casters Slate & Platinum Space # 6004745
Page 4 of
4