elink EL-IP4-01 Installation instructions

E-LINK TECHNOLOGY CO., LTD.
Add: E Block, Shifeng Industrial Park, Longhua, Shenzhen-518109, China
Tel: [phone], Fax: [phone], E-mail: [e-mail]
www.e-linktech.com,www.ifanspace.com
Battery Case for iPhone 4
(Model: EL-IP4-01)
Specifications & User Manual
Product specifications:
ITEMS SPECIFICATION REMARK
Model EL-IP4-01
Input Voltage 5.0V/1.0A(Max) Charge
Output Voltage 5.0±0.25V/0.5A
Nominal Capacity 1450mAh
Adaptable for iPhone4
Cell Type Li-polymer / 1450mAh
Standby Time Up to 300h
Talk Time Up to 7h
Internet Surfing Time Up to 6h
Audio Play Time Up to 40h
Video Play Time Up to10h
Dimensions 15mm (T) x 61mm (W) x 124mm (L)
Color Champagne / Silver / Black / Pearl White (customized color optional)
Weight 53.5g
Communicate Synching with iTunes

Features:
Matching iPhone 4 style design. Thin and Cool.
Capacity: 1450mAh(Li-Po) built-in battery, double standby time for your iPhone 4;
Cut outs for all the iPhone 4 features, use your iphone without removing it from the case.
Strong & durable engineering material protect your iphone 4 from bumps & scratching..
Protective IC circuit efficiently avoid short-circuit, over-charged and malfunction even under extreme conditions.
Bracket Stand, Built-in folding bracket frees your hand while enjoying movies.
Illustration:
Installing your iPhone 4 into battery case:
Caution: Please install the top cover on iPhone 4 prior to placing it into IFANS pack.

Unistalling:
Push iPhone 4 out together with top cover.
Caution: Please pull the top cover out a little bit in direction that vertical to iPhone screen before pushing.
Notes:
•When the iPhone battery is fully drained in your iFans battery case, the iPhone charging icon will revert to its normal usage.
•The battery case includes a USB cable. Use the provided USB cable to charge your battery case.
Charging your Battery Case and iPhone 4:
Connect your battery case(iPhone already installed) to the USB power cable
Connect the USB power cable to any USB power source such as computer to begin charging.
Charge until the LED indicators read full.
Charging your iPhone 4 with Battery Case:
Press on/off button (about 3s) to charge your iPhone in condition of no external USB power sources
Press again on/off button (about 3s) to power off battery case when iPhone is fully charged,which can significantly save the
capacity of built-in battery so as to charge the iPhone next time.
Press on/off button (≤2s) to indicate the remaining capacity of the built-in battery in battery case
LED indicators: CHARGING
MODE LED1 LED2 LED3 LED4
Power＜25% BLINKING OFF OFF OFF
25%≤Power＜50% ON BLINKING OFF OFF
50%≤Power＜75% ON ON BLINKING OFF
75%＜Power ON ON ON BLINKING
FULL ON ON ON ON
DISCHARGING
MODE LED1 LED2 LED3 LED4
75%≤Power≤100% ON ON ON ON
50%≤Power ≤75% ON ON ON OFF
25%≤Power≤50% ON ON OFF OFF
Power ≤25% ON OFF OFF OFF
Empty OFF OFF OFF OFF

Package Contents Included:
iFans Battery Case
USB power cable
User Manual
Warning:
1. To extend storage, please fully charge IFANS pack before first use.
2. Be cautious of excessive drops, abrasions or other impacts to IFANS power pack. Please stop using immediately if any
abnormal phenomenon occurred.
3. Do not expose IFANSto wet or damp conditions, please keep it dry.
4. Do not use near heat emitting appliances.
5. You are suggested to use included USB cable to charge IFANSpack, others might cause compatibility problem.
6. Do not attempt to replace any spare parts of IFANS pack.
7. It is normal phenomenon that IFANS pack gets a little warm when charging due to high output.
8. Never dispose of the IFANS pack in dustbin, please bring used batteries to your local battery recycling center.
9. Do not connect the IFANS to iPhone 4 if there has been occasions of prolonged non use.
One year limited warranty.