Cochlear Wireless phone clip User manual

1
COCHLEAR™WIRELESS
PHONECLIP
POCKET GUIDE

2
Welcome to
True Wireless.
No Strings Attached.
Index
3. Overview
4. Getting Started
5. Product Diagram
6. Pairing
10. Using
Visit us online for helpful tips,
how-to videos and more:
www.cochlear.com/us/N6wireless
recipients.mycochlear.com

The Cochlear™Wireless
Phone Clip allows you to:
How to:
Enjoy hands-free calling direct to
your CP900 Series Sound Processor.
Hear your Bluetooth®-enabled
navigation system.
Stream music from a Bluetooth-
enabled device.
The Phone Clip can be easily attached
to clothing. The built-in microphone will
pick up and transmit your voice, even if
your phone is several meters away.
Up to
7 meters
Sound Processor
10-30cm between
mouth and microphone
3
10-30cm between
mouth and Phone Clip

Getting Started
Charging the battery
Plug one end of the included micro-
USB charging cable into the Phone
Clip and the other into a computer,
or into a power outlet via the
supplied adapter.
When the red LED indicator on top of
the Phone Clip turns green with a red
blink every 2 seconds charging
is complete.
Before you use your Phone Clip you
should allow it to charge for at least
3 hours, even if the indicator light
shows a full charge. The battery
cannot be overcharged.
Note: The Phone Clip provides 6 hours of
talk time or 80 hours of standby time from
a full charge.
4

5
Product Diagram
Call pick-up/
hang-up button
Micro-USB connector
for charging
Microphone
inlet
Volume control
Power
switch
ON
(Not used with
CP900 series)

6
Pairing
Follow the four steps below to pair
your Nucleus®6 or Kanso™Sound
Processor to the Cochlear Wireless
Phone Clip.
1Switch off your CP900 Series
Sound Processor.
Remove the Sound
Processor from your ear.
Disconnect the battery.
2Switch on your Phone Clip and
remove the silver cap.
Switch on
Remove cap
Press and hold Kanso
button until the light
is a steady orange.
OR

7
Press the white pairing button on
the Phone Clip once using the tip
of a pen or similar object.
3
Note: The LED will flash yellow every 2
seconds and the Phone Clip will now be
in pairing mode for 20 seconds.
Have more than one Wireless Accessory?
Consult the User Guide to pair up to three
devices to your sound processor(s).
While pairing mode is active (20
seconds), attach the battery to the
Nucleus 6 Sound Processor (CP910/920)
or Press the button on the Kanso Sound
Processor (CP950) to turn on.
4
A blue indicator light flashes to show that
pairing has been successful.

8
Pairing with a Mobile Phone
Follow the six steps below to pair your
the Cochlear Wireless Phone Clip with
your mobile phone.
1Switch on your Phone Clip and
remove the silver cap.
2Make sure your mobile phone’s
Bluetooth function is switched on.
Refer to your mobile phone user guide
for instructions. Press the blue Bluetooth
pairing button on the Phone Clip once
to activate the pairing mode for 2 minutes.
Switch on
Remove cap

9
During pairing mode the LED
will turn blue.
3
On your mobile phone search for
new Bluetooth devices and select
“Hearing Aid Phone” from the list.
If your mobile phone asks for a
passcode, enter “0000” (four zeros).
Your Phone Clip should now be
paired with your mobile phone.
If your mobile phone asks which
Bluetooth service you wish to
enable, select “Headset”.
4
5
6
Tip!: In most instances, a headset symbol on
the main screen of your mobile phone will
confirm that you have successfully connected.

10
Using
Now that the Cochlear Wireless
Phone Clip is paired you are ready
to start using it.
Managing calls with the call
pick-up / hang-up button
Incoming calls:
To answer a call, press once.
To decline a call, double-click.
During a call:
To transfer a call started on your
phone to the phone clip, press once.
To put a call on hold, press and
hold for 2 seconds.
To make a call:
To redial the last number,
double-click.
To activate voice dialling, press and
hold for 2 seconds.

11
Stream music from your phone
You can use the Phone Clip to
stream music from your mobile phone
or computer.
Tip!: To change the volume, use the
volume controls on the Phone Clip.
Connect the device to the Phone
Clip using Bluetooth.
Start playing music on the device.
You hear the audio
streaming from
the device.
To stop streaming,
stop playing music
on the device.

12
Cochlear Americas
13059 East Peakview Avenue
Centennial, CO 80111 USA
Telephone: [phone]
Support: 1 800 483 3123
Cochlear Canada Inc.
2500-120 Adelaide Street West
Toronto, ON M5H 1T1 Canada
Telephone: [phone]
Fax: [phone]
www.Cochlear.com/US
©Cochlear Limited 2014. All rights reserved.
Trademarks and registered trademarks are the
property of Cochlear Limited.
FUN2195 ISS3 OCT16
Visit us online for helpful tips,
how-to videos and more:
www.Cochlear.com/US/N6wireless
recipients.mycochlear.com