Elite MicroVario User manual

1
Esprit Tech (1) 321.729.4287
P.O. Box 360815 [e-mail]
Melbourne, FL https://www.espritTech.com
32936, USA
USER MANUAL
MicroVario is a sensitive altimeter/variometer which uses the latest MEMS technology to achieve a high level of
accuracy, while preserving miniature dimensions. The sensor is able to detect tiny changes in atmospheric
pressure to indicate the climb/sink rate.
FEATURES
-Small dimensions. The sensor is connected directly to the receiver telemetry port.
-Accurate measurement of absolute/relative altitude and climb/sink rate.
-Automatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2.
-Configurable alarms on altitude and climb rate.
-Configuration through the transmitter.
-Firmware updates.
MICRO VARIO
Dimensions
21,5x10x4mm
Weight
2g
Pressure range
300÷1200hPa
Altitude resolution
0.1m
Typical variometer noise ratio
± 0.05m/s
Operating current
15mA
Operating temperature
-20 –85°C
Supply Voltage
3.5 –12V
Telemetry
Duplex EX, Multiplex MSB, Graupner Hott, Futaba S.Bus2
Status LED
YES
INSTALLATION
Connect the MicroVario directly to the receiver telemetry port. Please note that the sensor is very sensitive to
changes in atmospheric pressure and also to mechanical stress. To reach the most accurate altitude
measurements please pay attention to the receiver placement. Try to avoid any mechanical stress on the
sensor. The MicroVario should not be directly exposed to the airflow and any close contact with components
producing heat (such as engines or speed controllers) should be avoided.

2
TELEMETRY AND SETTINGS
The device is compatible with JETIBOX for programming. The JETIBOX menu is divided into three sections:
Actual values –displays the latest telemetry values (altitude, vario, pressure, temperature) together
with minimums and maximums.
oReset Min/Max - press left+right buttons together to reset all minimums and maximums.
Settings –basic settings of the sensor
oLanguage –you can choose the language of the JETIBOX screen.
oVario Sensitivity –sets the amount of filtering for the pressure sensor data. By increasing the
sensitivity you will get faster response to altitude changes. Please note that the indicated noise
may be increased as well. (Default value: Medium)
oSink Rate –rate of airplane descent when there are no thermal effects. The value of sink rate is
added to the climb rate. This will result in locating thermal streams more precisely.
Example: When the model flies at its nominal sink rate 0.5m/s, the vario is silent. As soon as the
model enters any thermal upstream, the vario wil start beeping (although the airplane may still
be descending).
oSealevel Pressure –the sea level pressure is taken as a reference to calculate the absolute
altitude. To get the most accurate calculation of the altitude, set the pressure at your location
adjusted to the sea level. The International Standard Atmosphere Model defines the sea level
pressure to be 1013hPa.
oRound Altitude –permits or denies rounding the altitude values displayed on the transmitter.
Relative and absolute altitude round to full meters, decimal part is omitted.
oAltitude Alarm –you can set a high altitude alarm. *)
oVario Alarm –you can set an alarm for excessive climb or sink rate.*)
oAlarm Interval –sets the time period between alarm announcement.
Service –In this menu you can view the device version and reset it to the default factory configuration.
*) The alarm setting is compatible with Duplex and Hott systems.
JETIBOX Connection
Plug the MicroVario into the sensor slot of the JETIBOX. Power it up with a battery with appropriate voltage
(4.5 - 8.4V). Now you can configure the sensor using the arrows on the JETIBOX.

3
Complete menu structure:
Graupner Hott Menu Structure:
MicroVario offers telemetry as a standard VARIO telemetry module.
Futaba and Multiplex connection
Futaba and Multiplex systems do not offer wireless device configuration. The telemetry transmission is
possible with the following fixed sensor slots:
Futaba S.Bus2
Multiplex MSB
Altitude
19
6
Vario
18
7
Note
Manual detection in the menu Linkage –Sensor.
Choose F1672 vario on slot 18.
Automatically detected by the transmitter.

4
SAFETY INFORMATION
Operate the MicroVario always in dry environment and within the device limits stated in this guide.
Never expose the device to excessive heat or cold.
Never apply mechanical stress or excessive force to the MicroVario. The sensing element can be
damaged or measure imprecisely if the force is applied.
Do not remove the heat shrink tube from the device and do not try to implement any changes or
modifications. This can lead to a total destruction and to the denial of any warranty claims.
Always check the polarity of the connection. Never inverse the polarity –this could lead to total
destruction.
WARRANTY
We grant a warranty of 24 months from the day of purchase under the assumption that they have been
operated in conformity with these instructions at recommended voltages and that they were not damaged
mechanically. Warranty and post warranty service is provided by the manufacturer.