Elived YD2003-ZQ User manual

If you have any questions , please contact our customer service.
32~55"
LDT02L-US1
Min: 75x75mm / 3x3"
Max: 400x400mm / 16x16"
88lbs
40kg
Table Top TV Stand
Installation Manual

01
MAX:
400mm/16"
MAX:400mm/16"
Must Check Before Installation
88 LBS
(40 KG)
Yes — Perfect!
No — This mount is NOT compatible.
Yes — Perfect!
No — This mount is NOT compatible.
4. Safety Caution
3. Extra Installation
Tools You Need
(Not Along with the Kit)
Please read the manual carefully before installation.
If you have anyconfusions about the instructions or any doubts about the
product reliability, please do not hesitate to ask our customer service for help.
●Incorrect installation may result in product damage or body injury.
●Do not apply this product to any purpose not indicated.
Screwdriver
2M
Band Tape
2m
2. Is the weight of your
TV (with accessories)
less than 88LBS (40KG)?
1. Is the dimension of
your TV VESA mount
inside the range of
75×75mm(3×3") to
400×400mm(16×16")?
If this mount is NOT compatible, please contact our customer service to nd a compatible mount.

02
NOTE: Not all hardware included will be used.
PACKAGE CONTENTS
① (×1)
Base
② (×1)
Support Pillar
A (×3)
Bolt M6×30mm
G (×4)
Foot Pad
B (×1)
Washer
E (×2)
Safety Lock
D (×1)
Plastic Cover
H (×1)
4mm Allen Key
④ (×2)
TV Bracket
③ (×1)
TV Plate
F (×2)
Wire Clip
M-D (×4)
M8×15mm
M-C (×4)
M6×30mm
M-E (×4)
M8×45mm
M-B (×4)
M6×15mm
M-A (×4)
M4×30mm
C2 (×2)
D6 Washer
C1 (×2)
Bolt M6×45mm
M-F (×4)
D5mm/D8mm
M-H (×8)
H10mm
M-G (×8)
H5mm
TV Screw / Washer / Spacer

03
STEP 1: Support Pillar Installation
Put Base ( ① ) on the table; put washer (B) and M6×30mm bolts (A) on the base; put Plastic Cover (D) and
Support Pillar ( ② ) under the base, keep clip holes toward backside.
Then tighten the bolts (A) with the 4mm allen key (H).
Table
Checklist
② (x1) Support Pillar
A (x3) Bolt M6×30mm
B (x1) Washer
D (x1) Plastic Cover
H (x1) 4mm Allen Key
① (x1) Base
Checklist
G (x4) Foot Pad
Tear o plastic lm of Foot Pads (G), then attach Foot Pads (G) near four conors of the Base( ① ) bottom.
STEP 2: Apply Foot Pads to the Base
①
G
Table
A
B
①
D
②
H
Note:
Support Pillar should be
placed with clip holes
facing backwards.

04
STEP 3: TV Plate Installation
Step 3-1: Turn over the base.
Choose the appropriate position (three options) for your TV Plate( ③ ), then hang the TV Plate ( ③ )
onto the Support Pillar ( ② ).
Checklist
③ (x1) TV Plate
75mm
75mm
Note:
Three choices for
height adjustment.
C1
③
C2
②
③
H
Step 3-2: Connect TV Plate ( ③ ) to Support Pillar ( ② ) by using Bolts (C1) and Washers (C2), then tighten
the Bolts (C1) with 4mm Allen Key (H).
Checklist
C1 (x2) Bolt M6×45mm
C2 (x2) M6 Washer
H (x1) 4mm Allen Key
Note: TV Plate should be
installed with the ARROW
mark pointing UPWARDS.

05
STEP 4: Wire Clip Installation
Attach Wire Clips (F) into the holes of Support Pillar ② .
Checklist
F (x2) Wire Clip
F
②

06
STEP 5: Attach the TV Brackets
1-1 Select TV Screws
1-2 Need Spacer?
Yes, choose the appropriate screws, washers, and spacers for your TV.
TV back
Bracket
Long Screw
Spacer
Washer
No, just choose the screws, washers.
Bracket Washer
TV back
Short Screw
M8
M6
M4
1-3 Attach the TV Brackets
Attach the TV Brackets ( ④ ) to the back of TV.
Secure it with TV screws, washers and spacers.
Checklist
④ (x2) TV Bracket
TOP OF TV
May be needed
Not for M8 Screws
M-F
M-G M-H
M-C
M-A M-B
M-E
M-D
④
1
43
2
Flat Back Round Back
Inset Holes Cables
Correct Correct
Too LongToo Short Not Vertical
No!

07
Choose the appropriate position (three options) for your TV. Hang TV with brackets onto the TV plate.
Put the safety lock (E) in place and tighten the xing screw to the TV plate securely.
STEP 6: Attach TV with Brackets to TV Plate
Hang on top
of TV plate
To the bottom
Lock to the bottom
of the TV Plate
E
45mm
45mm
Note:
Three choices for
height adjustment.
Checklist
E (x2) Safety Lock

08
STEP 7: Cable Management
Manage cables with the Wire Clips (F).
F

09
Adjustments
Swivel adjustment
Refer to the below illustrations to adjust TV angle.
-25°+25°
Wall
Note: When the TV Stand is placed against the wall, the
actual swivel angle is determined by the screen size.

10
Product Dimensions
434mm/17.09"
110mm
/4.33"
MAX:
400mm/16"
MIN:
75mm/3"
MAX:400mm/16"
MIN:75mm/3"
400mm/15.75"
70mm
/2.76"
30mm
/1.18"
136mm
/5.35"
+25°/-25°
447mm
/17.6"
16mm
/0.63"
MAX:
661mm
/26.02"
MIN:
421mm
/16.57"
260mm
/10.24"
45mm/1.77"
45mm/1.77"
139mm
/5.47"
434mm
/17.09"

• Don't allow children to climb, stand, hang, or play on any part of TV or stand.
• This product is intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury.
• Check that the bracket is secure and safe to use at regular intervals
(at least every three months).
CAUTION AND MAINTENANCE: