Elived YD4001 User manual

YD4001 INSTALLATION INSTRUCTION
（V2）
If you have any questions, please contact us.
Max:
40KG
(88LBS)
1

CAUTION AND MAINTENANCE:
• Never allow children to climb, stand, hang, or play on any part of monitor or stand.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure
and personal injury.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Before getting started, let’s make sure this mount is perfect for you!
MAX:
400mm/16"
MAX:400mm/16"
1
3
2
Safety Caution
Installation Tools
(Not Included)
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please contact us.
●Incorrect installation may result in product damage or body injury. ELIVED shall
bear no responsibility for any damage or injury resulted from incorrect
installation, incorrect assembly or misuse.
●Do not apply this product to any purpose not indicated by ELIVED.
2M2M
Screwdriver
Band Tape
2m
4
Does your TV
(including accesso-
ries) weigh less than
40KG (88LBS)?
Is your TV VESA
equal to/greater than
75x75mm/3x3" and
equal to/less than
400x400mm/16x16"?
Yes --- Perfect!
No --- This mount is NOT compatible.
Yes --- Perfect!
No --- This mount is NOT compatible.
Max:
40KG
(88LBS)

Tempered Glass Base

STEP 1
1-2
1-1
Connecting the Support Pillar ①to Tempered Glass Base ③
Put tempered glass base ③on the table. Put steel gasket (R), paper gasket (R) and M6X25
bolt (L) under tempered glass base ③. Make sure the paper gasket (R) face to the tempered
glass base ③.
Turn plastic cover (Y) and support pillar ①upside down under tempered glass base ③
and then tighten the bolts (L) with the allen key (V).
Attach foot pads (W) on the bottom of the tempered
glass base ③at the corners.

STEP 2
2-2
Connecting TV plate ④to support pillar ①by using
M6x40 bolts (S), washers (T) and nuts (Q). Please see
above figures.
2-1

Choose the appropriate quantity spacers for your TV.
May be 0~4pcs. Alternate spacers setup below:
STEP 3
STEP 4

STEP 5

8
Product dimension:
400mm
MAX:400mm
MAX:400mm
433mm
260mm
MIN:75mm
503 / 553 / 603 / 653mm
MIN:75mm
430mm