Elkay EWSF13026 User manual

Scrub-up Sink, Sensor-Operated,
Single Station, Wall Mounted
Models EWSF13026SACC and EWSF13026
®
SPECIFICATIONS
GENERAL
#16 gauge, type 304 (18-8), stainless steel single station slant
front scrub-up sink with sensor faucet, coved corners, keyed
access door, wall hanger, full length backsplash and full enclo-
sure. Exposed surfaces are polished to a satin finish. Underside
is sound deadened.
FURNISHED COMPLETE WITH:
SUPPLY: LK720AC Sensor-operated, deck-mounted, goose-
neck faucet with adjustable sensor eye, adjustable
temperature control and manual override. AC pow-
ered, chrome plated – solid brass construction.
15-1/4" (387mm) high (bottom of base to top of
spout) and 8" (203mm) reach spout with 2.0 GPM
laminar flow control, 10-1/4" (260mm) from deck to
spout outlet. Includes vandal-resistant, water-
resistant sensor control module with armored vandal-
resistant control and power cables. 12V DC plug-in
voltage adapter, slow-closing piston operated
solenoid valve, (2) in-line Y strainers with check
valves, and (2) 3/8" (10mm) stainless steel braided
19" (483mm) supply line. Control circuit is solid state,
has adjustable sensor range (6" [152mm] preset to
30" [762mm]), shut off delay preset at 1 second and
field adjustable to 2, 4 or 8 seconds, and automatic
time-out feature (to prevent sink overflow) is preset at
0 seconds and is field adjustable to 15, 30 or 60
seconds.
DRAIN: LK18B Stainless steel perforated strainer grid, drain
fitting with 1-1/2" (38 mm) O.D. x 4" (102mm) stain-
less steel tailpiece.
FOLLOWING MODEL DOES NOT INCLUDE SENSOR
FAUCET AND DRAIN:
EWSF13026
SPECIFY FAUCET DRILLINGS AND LOCATION.
OPTIONAL (Specify Separately):
LK723 Anti-scald thermostatic mixing valve with nickel
plated brass body, 1/2" (13mm) union SWT inlets and outlet
connection. Comes with internal check valves on inlets and
mixed temperature range of 80° – 120°F
.
LK729 Battery holder with (4) AA batteries for converting
LK720AC to battery powered.
LK731 Rose spray head, 2.5 GPM, female thread.
Elkay Manufacturing Company 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2002 Elkay Mfg. Co.
(Rev. 3/02) 3-30B
www.elkay.com
Model EWSF13026SACC
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
DIMENSIONS
H
8-3/8"
(213mm)
11-1/2"
(292mm) 5-3/4"
(146mm)
I
J
F
C
A
DB
G
E3/4"
(19mm)
TYP.
3-1/2" (89mm) DIA. HOLE
1-1/4" (32mm) DIA. HOLE
2-1/2" (64mm)
4-3/4"
(121mm)
E
F
H
KEY LATCH
HANDLE
18"
(457mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
TYP.
26"
(660mm)
NOTE: SEE REVERSE SIDE FOR ROUGH-IN DIMENSIONS
Model A B C D E F G H I J
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
EWSF13026 30 762 23 584 26 660 161/4413 2 51 15 381 81/8206 4 102 11 279 22 559

ROUGH-IN DIMENSIONS
®
Elkay Manufacturing Company 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2002 Elkay Mfg. Co.
3-30B (Rev. 3/02)
Scrub-up Sink, Sensor-Operated,
Single Station, Wall Mounted
Models EWSF13026SACC and EWSF13026
LK720AC SENSOR FAUCET
SINGLE STATION ROUGH-IN
DIMENSIONS SHOWN WILL PROVIDE
SINK RIM HEIGHT OF 36" (914mm)
ALL FASTENERS SUPPLIED
BY OTHERS
WALL ANCHOR POINTS CORRESPOND
WITH 5/16" (8mm) x 3/4" (19mm) LONG
SLOTS IN SINK TURNBACK
FINISHED FLOOR
37"
(940mm)
14-5/8"
(371mm)
WALL ANCHOR POINT (4)
OUTLINE OF SINK
WALL HANGER
SINK 5/16" (8mm) x 3/4" (19mm) LONG
4 SLOTS
6"
(152mm)
14"
(356mm)
4"
(102mm)
20-1/4"
(514mm)
1-1/2" (38mm)
O.D. WASTE
4"
(102mm)
8"
(203mm)
8"
(203mm)
1-1/2" (38mm)
C
L
14-5/8"
(371mm)
A/C POWER OUTLET 
(LOCATE CENTER OF OUTLET 20" [508mm] 
±2-1/2" [64mm] FROM FINISHED FLOOR)
1/2" (13mm) I.P.S. INLET (2 PLACES)
18-1/2"
(470mm)
C
H
Hot Cold
LK723
STOP VALVES, TUBING,
FITTINGS, AND 3/8"
COMPRESSION
TEE BY OTHERS
FIG. 2
FIG. 1
LK720AC SENSOR FAUCET WITH OPTIONAL
LK723 THERMOSTATIC MIXING VALVE
(C/L FASTENERS)
4"
(102mm)
15-1/4"
(387mm)
10-1/4"
(260mm)
8"
(203mm)
19"
(483mm)
MAX
2-5/8"
(67mm)
6-1/2"
(165mm)