Elumen8 DB1300 User manual

Order codes: ELUM065
DB1300 DMX Stage Blinder
User Manual

www.prolight.co.uk DB1300 DMX Stage Blinder User Manual
2
Safety advice & installation
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
240VAC,50Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesandlampsofthesametypeandrating.
• ThisdevicefallsunderprotectionclassI.Thepowerplug
mustonlybepluggedintoaprotectionclassIoutlet.The
voltageandfrequencymustbeexactlythesameasstated
onthexture.Incorrectvoltagesorpoweroutletscanlead
tothedestructionofthextureandtoelectricshocks.
• Duringtheinitialstart-upsomesmokeorsmellmayarise.
Thisisanormalprocessanddoesnotnecessarilymean
thatthextureisdefective.
• CAUTION!Duringtheoperation,thehousing/lamps
becomeextremelyhot.
• Thisdeviceisdesignedforprofessionaluseonly
e.g.onstages,indiscothequesandtheatresetc.
• Themaximumdutycycleis1minute(fullon).Afterwards,
switchthedeviceoffandletitcooldownfor3minutes.
• Thexturemustneverbeoperatedorstockpiledin
surroundingswheresplashwater,rain,moistureorfog
mayharmthedevice.Moistureorveryhighhumidity
canreducetheinsulationandleadtoelectricshocks.
Whenusingsmokemachines,makesurethextureis
neverexposedtothedirectsmokejetandisinstalledin
adistanceof0.5mbetweenthesmokemachineandthe
xture.Theroommustonlybesaturatedwithanamount
ofsmokewherethevisibilityisstillgreaterthan10m.
• Neverusethisxtureduringthunderstorms.Overvoltage
coulddestroythexture.Alwaysdisconnectthedevice
duringthunderstorms.
• Thesymbol determinestheminimum
distancefromlitobjects.Theminimumdistance
betweenlightxtureandtheilluminatedsurface
mustbemorethan2m.

www.prolight.co.uk DB1300 DMX Stage Blinder User Manual
3
Safety advice & installation
CABLE/LAMP INSTALLATION
Before replacing the lamp, unplug the mains lead and let the lamp cool down (for approx. 20 minutes).
Duringtheinstallationdonottouchtheglassbulbsbare-handed!Pleasefollowthelampmanufacturersnotes.
Donotinstalllampswithahigherwattage.Lampswithahigherwattagegeneratetemperaturesthextureisnotdesignedfor.
Damagescausednon-observancearenotsubjecttowarranty.
Forinstallationyouwillneed2xPar36650W120VDWElamps(Ordercode:LAMP91).
Duringtheoperation,thelampreacheshightemperaturesofupto400°C.

To install/replace the lamp follow the procedure below:
Step 1:Unscrewthelampcover.
Step 2:Ifreplacingthelamp,removetheoldlampfromthehousingandloosenthescrewsandwires.
Step 3:LoosenthescrewsontheonthenewPar36650W120VDWElampwithanappropriatescrewdriver.
Step 4:Connectthewirestothelampusinganappropriatescrewdriver.
Step 5Tightenthescrews.
Step 6:Insertthelampintothehousing.
Step 7:Screwthelampcoverbackontothexture.
• Thisxtureisonlyallowedtobeinstalledusingthe
suppliedmountingbracket.Inordertosafeguardsufcient
ventilation,leave0.5moffreespacearoundthedevice.
• Thehousingmustnevertouchsurroundingsurfacesor
objects.
• Alwayssecurethexturewithanappropriatesafetywire
asasecuritysafetymeasure.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• WARRANTY:Twoyearsfromdateofpurchase.
Thisdoesnotapplytolampsortriacdevices.
DB1300 Stage Blinder, 2 x Par 36 650W
120V DWE Lamps, 240V connection
The connection cable must have a
diameter of at least 3 x 1.00mm2.
CAUTION!
THE LAMP HAS TO BE
REPLACED WHEN IT IS
DAMAGED OR DEFORMED
DUE TO THE HEAT.
DWE
120V/650W
DWE
120V/650W
240V
ENLNL
DANGER TO LIFE!
THE INSTALLATION MUST
ONLY BE CARRIED OUT BY
A QUALIFIED TECHNICIAN.
DO NOT OPERATE THIS
FIXTURE WITHOUT THE
LAMP CLOSED.
DANGER TO LIFE!
ONLY INSTALL LAMPS WITH
THE FIXTURE SWITCHED OFF!
UNPLUG FROM THE MAINS
BEFORE INSTALLING LAMPS.

www.prolight.co.uk DB1300 DMX Stage Blinder User Manual
4
CONNECTION WITH THE MAINS
Connectthexturetothemainswiththepowerplug.Theoccupationoftheconnectioncablesisasfollows:


Attention! Theearthhastobeconnected.
Ifthedevicewillbedirectlyconnectedwiththelocalpowersupplynetwork,adisconnectionswitchwithaminimumopening
of3mmateverypolehastobeincludedinthepermanentelectricalinstallation.
ThedevicemustonlybeconnectedwithanelectricinstallationcarriedoutincompliancewiththeIECstandards.Theelectric
installationmustbeequippedwithaResidualCurrentDevice(RCD)withamaximumfaultcurrentof30mA.
CONNECTION WITH THE MAINS
Ifthelampburnsout,thene-wirefuseofthexturemightfusetoo.Onlyreplacethefusebyafuseofthesame
typeandrating.
Before replacing the fuse, unplug the mains lead.
To replace the fuse follow the procedure below:
Step 1:Unscrewthefuseholderontherearpanelwithanappropriatescrewdriverfromthehousinganti-clockwise.
Step 2:Removetheoldfusefromthefuseholder.
Step 3:Installthenewfuseinthefuseholder.
Step 4:Replacethefuseholderinthehousingandscrewitbackin.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
Safety advice & installation
DANGER TO LIFE!
WHEN INSTALLING THE FIXTURE, MAKE SURE THERE IS NO
HIGHLY-INFLAMMABLE MATERIAL WITHIN A MINIMUM DISTANCE OF 0.5m.

www.prolight.co.uk DB1300 DMX Stage Blinder User Manual
5
Product overview & technical specications
TheeLumen8DB1300Blinderfeaturesanintegral,1CHDMXdimmerallowingtraditionalblinderstobeadded
intolightingrigswithoutanybulkydimmerracks.Utilisingindustrystandard650WDWEMFLlampswiredinseries
the2-cellblinderdeliversthewarmtonesofhalogenfromacompact,ruggedchassis.Idealforuseonstage.
•2x120V650WDWElampswiredinseries
(Ordercode:LAMP91-notsupplied)
•Beamangle:40°x30°
•7699Lux@2m(fullon)
•DMXchannels:1
•Dimming,autoandmaster/slavemodes
•Dipswitchmode/addressselection
•0-100%dimming
•Captivepowerconnectionttedwitha13AUKplug
•3-PinXLRinput/output
•Convectioncooled
DB1300 DMX 2 Cell Stage Blinder
Specications DB1300 Stage Blinder
Powerconsumption 1320W
Max.ambienttemperatureTa45°C
Max.distancefromammablesurfaces 0.5m
Minimumdistancetolitobject 2m
Dutycycle 1minute(fullon)
Coolingtime 3minutes
Powersupply 240V,50Hz
Fuse F8A250V
Dimensions 225x390x175mm
Weight 3.2kg
Ordercode ELUM065
175mm
190mm
225mm
325mm
390mm
0m 1m 2m 3m 4m 5m
30800 7699 3420 1930 1230
40 x 30 °
Lux
40 x 30°