Embedded Artists LPC4088 User manual

LPC4088 Display Module - User’s Guide
Copyright 2015 © Embedded Artists AB
EA2-USG-1501 Rev A
LPC4088 Display Module
Measurements
Get Up-and-Running Quickly and
Start Developing Your Application On Day 1!

LPC4088 Display Module - User’s Guide
Page 2
Copyright 2015 © Embedded Artists AB
Embedded Artists AB
Davidshallsgatan 16
211 45 Malmö
Sweden
[e-mail]
http://www.EmbeddedArtists.com
Copyright 2015 © Embedded Artists AB. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of
Embedded Artists AB.
Disclaimer
Embedded Artists AB makes no representation or warranties with respect to the contents hereof and
specifically disclaim any implied warranties or merchantability or fitness for any particular purpose.
Information in this publication is subject to change without notice and does not represent a
commitment on the part of Embedded Artists AB.
Feedback
We appreciate any feedback you may have for improvements on this document. Please send your
comments to [e-mail].
Trademarks
All brand and product names mentioned herein are trademarks, services marks, registered
trademarks, or registered service marks of their respective owners and should be treated as such.

LPC4088 Display Module - User’s Guide
Page 3
Copyright 2015 © Embedded Artists AB
Table of Contents
1Document Revision History 4
2Module Measurements 5
2.1 LPC4088 Display Module rev B 5
2.2 LPC4088 Display Module rev A 6
2.3 LPC4088 Display Module rev B, 4.3" LCD with Resistive TP 7
2.4 LPC4088 Display Module rev B, 5" LCD with Resistive TP 8
2.5 LPC4088 Display Module rev B, 4.3" LCD with Capacitive TP 9
2.6 LPC4088 Display Module rev A, 4.3" LCD with Resistive TP 10
2.7 LPC4088 Display Module rev A, 5" LCD with Resistive TP 11

LPC4088 Display Module - User’s Guide
Page 4
Copyright 2015 © Embedded Artists AB
1 Document Revision History
Revision
Date
Description
PA1/PA2
2015-01-26
First version.
PA3
2015-03-09
Added information about 2 mm clearance around the LCD frame.
Added information about hole diameters.
PA4
2015-03-16
Added information about 5" version, rev B.

LPC4088 Display Module - User’s Guide
Page 5
Copyright 2015 © Embedded Artists AB
2 Module Measurements
This chapter contains measurements of the different LPC4088 Display Module versions.
2.1 LPC4088 Display Module rev B
Mounting holes are 3.25 mm in diameter.
Stand-offs for expansion board have M3 threads.
4800 mil, 121.92 mm
1010 mil, 25.65 mm
404 mil, 10.26 mm
1775 mil, 45.09 mm
3900 mil, 99.06 mm
3565 mil, 90.55 mm
1391 mil, 35.33 mm
413 mil, 10.49 mm
2692 mil, 68.38 mm
4449 mil, 113.00 mm
2782 mil, 70.66 mm
1350 mil, 34.29 mm
178 mil, 4.52 mm
157 mil, 3.99 mm
1093 mil, 27.76 mm
850 mil, 21.59 mm
630 mil, 16.00 mm

LPC4088 Display Module - User’s Guide
Page 6
Copyright 2015 © Embedded Artists AB
2.2 LPC4088 Display Module rev A
Mounting holes are 3.25 mm in diameter.
Stand-offs for expansion board have M3 threads.
4449 mil, 113.00 mm
1010 mil, 25.65 mm
404 mil, 10.26 mm
1775 mil, 45.09 mm
3900 mil, 99.06 mm
3565 mil, 90.55 mm
1391 mil, 35.33 mm
413 mil, 10.49 mm
2745 mil, 69.72 mm
3082 mil, 78.28 mm
2782 mil, 70.66 mm
1292 mil, 32.82 mm
178 mil, 4.52 mm
152 mil, 3.86 mm
850 mil, 21.59 mm
630 mil, 16.00 mm
4800 mil, 121.92 mm
3105 mil, 78.87 mm
22 mil, 0.56 mm

LPC4088 Display Module - User’s Guide
Page 7
Copyright 2015 © Embedded Artists AB
2.3 LPC4088 Display Module rev B, 4.3" LCD with Resistive TP
This drawing shows the display side. Measurements tolerance: ±20 mil, ±0.5 mm
116 mil, 2.95 mm
62 mil, 1.6 mm
Gasket (not included) mounted on bezel, not on LCD:
80 mil, 2.0 mm wide
10-30 mil, 0.3-0.7 mm thick
LCD
Bezel (not included)
Mounting hole in bezel
Mounting display module to bezel with just adhesive is NOT recommended!
Gasket between pcb and LCD:
about 96 mil, 2.45 mm thick
276±20 mil, 7.0±0.5 mm
145 mil, 3.68 mm
2077 mil, 52.75 mm
1227 mil, 31.17 mm
2646 mil, 67.20 mm
293 mil, 7.44 mm
4154 mil, 105.50 mm
Active area:
3742x2120 mil, 95.04 x 53.86 mm
167 mil, 4.24 mm
94 mil, 2.40 mm
206 mil, 5.23 mm
134 mil, 3.40 mm
Glass area (Bezel opening):
3874x2264 mil, 98.40 x 57.50 mm
Leave 2 mm clearance around ALL of the display.
This is to accommodate for display changes and for touch panel connections.
670 mil, 17.02 mm
170 mil, 4.32 mm
140 mil, 3.56 mm

LPC4088 Display Module - User’s Guide
Page 8
Copyright 2015 © Embedded Artists AB
2.4 LPC4088 Display Module rev B, 5" LCD with Resistive TP
This drawing shows the display side. Measurements tolerance: ±20 mil, ±0.5 mm
122 mil, 3.1 mm
62 mil, 1.6 mm
Gasket (not included) mounted on bezel, not on LCD:
80 mil, 2.0 mm wide
10-30 mil, 0.3-0.7 mm thick
LCD
Bezel (not included)
Mounting hole in bezel
Mounting display module to bezel with just adhesive is NOT recommended!
Gasket between pcb and LCD:
about 96 mil, 2.45 mm thick
281±20 mil, 7.15±0.5 mm
Leave 2 mm clearance around ALL of the display.
This is to accommodate for display changes and for touch panel connections.
670 mil, 17.02 mm
170 mil, 4.32 mm
140 mil, 3.56 mm
154 mil, 3.91 mm
2376 mil, 60.35 mm
1406 mil, 35.71 mm
2984 mil, 75.80 mm
301 mil, 7.65 mm
4752 mil, 120.7 mm
Active area:
4252x2551 mil, 108.0 x 64.8 mm
130 mil, 3.31 mm
79 mil, 2.01 mm
250 mil, 6.35 mm
197 mil, 5.0 mm
Glass area (Bezel opening):
4358x2654 mil, 110.7 x 67.4 mm

LPC4088 Display Module - User’s Guide
Page 9
Copyright 2015 © Embedded Artists AB
2.5 LPC4088 Display Module rev B, 4.3" LCD with Capacitive TP
This drawing shows the display side. Measurements tolerance: ±20 mil, ±0.5 mm
224 mil, 5.7 mm
62 mil, 1.6 mm
Gasket (not included) mounted on bezel, not on LCD:
80 mil, 2.0 mm wide
10-30 mil, 0.3-0.7 mm thick
LCD
Bezel (not included)
Mounting hole in bezel
Mounting display module to bezel with just adhesive is NOT recommended!
Gasket between pcb and LCD:
about 96 mil, 2.45 mm thick
384±30 mil, 9.75±0.75 mm
145 mil, 3.68 mm
2077 mil, 52.75 mm
1211 mil, 30.75 mm
2646 mil, 67.20 mm
293 mil, 7.44 mm
4154 mil, 105.50 mm
Active area:
3742x2120 mil, 95.04 x 53.86 mm
150 mil, 3.82 mm
94 mil, 2.40 mm
206 mil, 5.23 mm
134 mil, 3.40 mm
Glass area (Bezel opening):
3886x2264 mil, 98.70 x 57.50 mm
Leave 2 mm clearance around ALL of the display.
This is to accommodate for display changes and for touch panel connections.
670 mil, 17.02 mm
170 mil, 4.32 mm
140 mil, 3.56 mm

LPC4088 Display Module - User’s Guide
Page 10
Copyright 2015 © Embedded Artists AB
2.6 LPC4088 Display Module rev A, 4.3" LCD with Resistive TP
This drawing shows the display side. Measurements tolerance: ±20 mil, ±0.5 mm
Active area:
3742x2120 mil, 95.04 x 53.86 mm
167 mil, 4.24 mm
94 mil, 2.40 mm
206 mil, 5.23 mm
134 mil, 3.40 mm
Glass area (Bezel opening):
3874x2264 mil, 98.40 x 57.50 mm
145 mil, 3.68 mm
2077 mil, 52.75 mm
1227 mil, 31.17 mm
2646 mil, 67.20 mm
470 mil, 11.94 mm
4154 mil, 105.50 mm
116 mil, 2.95 mm
62 mil, 1.6 mm
Gasket (not included) mounted on bezel, not on LCD:
80 mil, 2.0 mm wide
10-30 mil, 0.3-0.7 mm thick
LCD
Bezel (not included)
Mounting hole in bezel
Mounting display module to bezel with just adhesive is NOT recommended!
Gasket between pcb and LCD:
about 96 mil, 2.45 mm thick
276±20 mil, 7.0±0.5 mm
Leave 2 mm clearance around ALL of the display.
This is to accommodate for display changes and for touch panel connections.

LPC4088 Display Module - User’s Guide
Page 11
Copyright 2015 © Embedded Artists AB
2.7 LPC4088 Display Module rev A, 5" LCD with Resistive TP
This drawing shows the display side. Measurements tolerance: ±20 mil, ±0.5 mm
154 mil, 3.91 mm
2376 mil, 60.35 mm
1406 mil, 35.71 mm
2984 mil, 75.80 mm
301 mil, 7.65 mm
4752 mil, 120.7 mm
122 mil, 3.1 mm
62 mil, 1.6 mm
Active area:
4252x2551 mil, 108.0 x 64.8 mm
Gasket (not included) mounted on bezel, not on LCD:
80 mil, 2.0 mm wide
10-30 mil, 0.3-0.7 mm thick
LCD
130 mil, 3.31 mm
79 mil, 2.01 mm
250 mil, 6.35 mm
197 mil, 5.0 mm
Glass area (Bezel opening):
4358x2654 mil, 110.7 x 67.4 mm
Bezel (not included)
Mounting hole in bezel
Mounting display module to bezel with just adhesive is NOT recommended!
Gasket between pcb and LCD:
about 96 mil, 2.45 mm thick
281±20 mil, 7.15±0.5 mm
Leave 2 mm clearance around ALL of the display.
This is to accommodate for display changes and for touch panel connections.