Embedded Solutions ADLE3800PC User manual

ADL Embedded Solutions GmbH, Eiserfelder Str. 316, ADL Embedded Solutions Inc. 4411 Morena Blvd., Suite 101
57080 Siegen, Germany San Diego, CA 92117-4345
P. [phone] F. [phone] P. [phone] F. [phone]
e-mail: [e-mail]; web: http://www.adl-europe.com e-mail: [e-mail]; web: http://www.adl-usa.com
ADLE3800PC
Manual
rev. 1.0

Contents
Beckhoff New Automation Technology ADLE3800PC page 3
Contents
0Document History................................................................................................................................. 6
1Introduction .......................................................................................................................................... 7
1.1 Important Notes ............................................................................................................................ 7
1.2 Technical Support......................................................................................................................... 7
1.3 Warranty ....................................................................................................................................... 7
1.4 Return Authorization..................................................................................................................... 7
1.5 Description of Safety Symbols...................................................................................................... 8
1.6 RoHS ............................................................................................................................................ 8
1.7 FCC Approval for Canada ............................................................................................................ 8
1.8 FCC Approvals for the United States of America......................................................................... 8
2Overview............................................................................................................................................ 10
2.1 Features...................................................................................................................................... 10
2.1.1 Specifications and Documents ........................................................................................... 11
3Connectors......................................................................................................................................... 12
3.1 Connector Map ........................................................................................................................... 13
3.2 Power Supply.............................................................................................................................. 14
3.3 System/SM-Bus.......................................................................................................................... 15
3.4 Memory....................................................................................................................................... 16
3.5 PCI/104-Express Bus ................................................................................................................. 19
3.6 PCI-Express Mini Card with mSATA .......................................................................................... 21
3.7 DVI/HDMI/VGA........................................................................................................................... 22
3.8 DisplayPort.................................................................................................................................. 23
3.9 USB 2.0....................................................................................................................................... 24
3.10 USB 3.0....................................................................................................................................... 25
3.11 LAN............................................................................................................................................. 26
3.12 Audio........................................................................................................................................... 27
3.13 SATA Interfaces.......................................................................................................................... 28
3.14 COM1 and COM2....................................................................................................................... 29
3.15 GPIO........................................................................................................................................... 30
3.16 Monitoring Functions .................................................................................................................. 31
4State LEDs......................................................................................................................................... 32
4.1 HD LED....................................................................................................................................... 32
4.2 RGB LED.................................................................................................................................... 33
4.3 LAN Activity LED ........................................................................................................................ 34
4.4 LAN Speed LED ......................................................................................................................... 35
5BIOS Settings..................................................................................................................................... 36
5.1 General Remarks........................................................................................................................ 36
5.2 Main............................................................................................................................................ 37
5.3 Advanced.................................................................................................................................... 38
5.3.1 ACPI Settings...................................................................................................................... 40
5.3.2 H/W Monitor........................................................................................................................ 41
5.3.3 CPU Configuration.............................................................................................................. 43
5.3.4 PPM Configuration.............................................................................................................. 47
5.3.5 SATA Configuration............................................................................................................ 48
5.3.6 Miscellaneous Configuration............................................................................................... 49
5.3.7 LPSS & SCC Configuration ................................................................................................ 50

Contents
page 4 Beckhoff New Automation Technology ADLE3800PC
5.3.8 Network Stack..................................................................................................................... 52
5.3.9 Power Controller Options.................................................................................................... 53
5.3.10 CSM Configuration ............................................................................................................. 55
5.3.11 SDIO Configuration............................................................................................................. 56
5.3.12 USB Configuration.............................................................................................................. 57
5.3.13 Security Configuration ........................................................................................................ 58
5.4 Chipset........................................................................................................................................ 59
5.4.1 North Bridge........................................................................................................................ 60
5.4.2 South Bridge....................................................................................................................... 64
5.5 Security....................................................................................................................................... 68
5.5.1 Secure Boot menu.............................................................................................................. 69
5.6 Boot............................................................................................................................................. 72
5.7 Save & Exit ................................................................................................................................. 73
5.8 BIOS Update............................................................................................................................... 74
6Mechanical Drawings......................................................................................................................... 75
6.1 PCB: Mounting Holes ................................................................................................................. 75
6.2 PCB: Pin 1 Dimensions - Top..................................................................................................... 76
6.3 PCB: Pin 1 Dimensions - Bottom................................................................................................ 77
6.4 PCB: Heat Sink/Die Center......................................................................................................... 78
6.5 Heat Spreader: Chassis Mount................................................................................................... 79
7Technical Data................................................................................................................................... 80
7.1 Electrical Data............................................................................................................................. 80
7.2 Environmental Conditions........................................................................................................... 80
7.3 Thermal Specifications ............................................................................................................... 81
IAnnex: Post-Codes............................................................................................................................ 83
II Annex: Resources.............................................................................................................................. 84
IO Range................................................................................................................................................ 84
Memory Range....................................................................................................................................... 84
Interrupt.................................................................................................................................................. 84
PCI Devices............................................................................................................................................ 85
SMB Devices.......................................................................................................................................... 85

Important Notes Chapter: Document History
ADL Embedded Solutions ADLE3800PC page 5

Chapter: Document History Important Notes
page 6 ADL Embedded Solutions ADLE3800PC
0 Document History
Version
Changes
0.1
first pre-release
1.0
first complete version
All company names, brand names, and product names referred to in this manual are registered or
unregistered trademarks of their respective holders and are, as such, protected by national and
international law.

Important Notes Chapter: Introduction
ADL Embedded Solutions ADLE3800PC page 7
1 Introduction
1.1 Important Notes
Please read this manual carefully before you begin installation of this hardware device. To avoid
Electrostatic Discharge (ESD) or transient voltage damage to the board, adhere to the following rules at
all times:
oYou must discharge your body from electricity before touching this board.
oTools you use must be discharged from electricity as well.
oPlease ensure that neither the board you want to install, nor the unit on which you want to install this
board, is energized before installation is completed.
oPlease do not touch any devices or components on the board.
As soon as the board is connected to a working power supply, touching
the board may result in electrical shock, even if the board has not been
switched on yet. Please also note that the mounting holes for heat sinks
are connected to ground, so when using an externally AC powered device, a substantial ground
plane differential can occur if the external device's AC power supply or cable does not include an
earth ground. This could also result in electrical shock when touching the device and the heat
sink simultaneously.
1.2 Technical Support
Technical support for this product can be obtained in the following ways:
oBy contacting our support staff at [phone] or [phone]
oBy contacting our staff via e-mail at [e-mail] or [e-mail]
oVia our website at www.adl-usa.com/support or www.adl-europe.com/support
1.3 Warranty
This product is warranted to be free of defects in workmanship and material. ADL Embedded Solutions'
sole obligation under this warranty is to provide replacement parts or repair services at no charge, except
shipping cost. Such defects which appear within 12 months of original shipment of ADL Embedded
Solutions will be covered, provided a written claim for service under warranty is received by ADL
Embedded Solutions no less then 30 days prior to the end of the warranty period of within 30 days of
discovery of the defect –whichever comes first. Warranty coverage is contingent upon proper handling
and operation of the product. Improper use such as unauthorized modifications or repair, operation
outside of specified ratings, or physical damage may void any service claims under warranty.
1.4 Return Authorization
All equipment returned to ADL Embedded Solutions for evaluation, repair, credit return, modification, or
any other reason must be accompanied by a Return Material Authorization (RMA) number. ADL
Embedded Solutions requires a completed RMA request form to be submitted in order to issue an RMA
number. The form can be found under the Support section at our website: www.adl-usa.com or
www.adl-europe.com. Submit the completed form to [email protected] or fax to [phone] for
the USA office, or to [e-mail] or fax to [phone] to request an RMA from the
European office in Germany. Following a review of the information provided, ADL Embedded Solutions
will issue an RMA number.
WARNING

Chapter: Introduction Description of Safety Symbols
page 8 ADL Embedded Solutions ADLE3800PC
1.5 Description of Safety Symbols
The following safety symbols are used in this documentation. They are intended to alert the reader to the
associated safety instructions.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE is used to address practices not related to physical injury.
1.6 RoHS
The PCB and all components are RoHS compliant (RoHS = Restriction of Hazardous Substances
Directive). The soldering process is lead free.
1.7 FCC Approval for Canada
FCC: Canadian Notice
This equipment does not exceed the Class A limits for radiated emissions as described in the Radio
Interference Regulations of the Canadian Department of Communications.
1.8 FCC Approvals for the United States of America
FCC: Federal Communications Commission Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
DANGER
WARNING
CAUTION
NOTICE

FCC Approvals for the United States of America Chapter: Introduction
ADL Embedded Solutions ADLE3800PC page 9

Chapter: Overview Features
page 10 ADL Embedded Solutions ADLE3800PC
2 Overview
2.1 Features
The ADLE3800PC is a highly complex motherboard in the PC/104™ form factor, complying with the
state-of-the-art "PCIe/104™" standard. It's based on a System-On-Chip (SoC) of Intel®'s Atom E3800
product family. Modern low voltage DDR3 technology provides top-notch memory performance,
accomodating up to 8 GByte of RAM (DDR3L-1600) via SO-DIMM204. PCI-Express is available through
the PCI/104-Express Type 2 connector, offering two x1 lanes for connecting all kinds of corresponding
expansion cards in a PCIe/104™ stack-down fashion. For connecting graphics devices, several interfaces
are available: CRT, HDMI and DisplayPort. Additional interfaces include two serial ports, two Gigabit
Ethernet interfaces (LAN), two SATA channels (up to 3Gb/s), an audio interface (HDA 7.1), eight USB2.0-
channels and one USB3.0-channels. There are also 16 discrete programmable GPIO signals available.
1x
SoDIMM204
DDR3L-
1333
MEMORY
Power VCCCore;
DDRVTT; GFXVCC;
1.05V; 1.5V; 1.8V; 3.3V BIOS
SATA1-2
RealTek®
ALC889
HDA Link
USB 2, 3, 5 & 6
1.5GB/3.0GB
Intel®
i210
LAN1 10/100/1000
SMBus
SPI NXP®
PCA9535
SMBus 16x GPIO
MIC 1/2
5.1 Audio
AUX l/r
SPDIF i/o
PIC3
(24FJ256GB210)FAN
DVI/HDMI
DVI/HDMI/DP
PCIe(x1)
Intel® Atom™
E3827, E3845,
E3815
USB1
USB2.0
PCIe/104 connector (type 2)
PCIe Mini Card
1x mSATA, 1x USB2.0
Intel®
i210
10/100/1000
LAN2
USB2.0
USB3.0
SMBus
COM 1-2
LPC
2x USB
2x (1x) PCIe x1

Features Chapter: Overview
ADL Embedded Solutions ADLE3800PC page 11
2.1.1 Specifications and Documents
In making this manual and for further reading of technical documentation, the following documents,
specifications and web-pages were used and are recommended.
PC/104™ Specification
Version 2.5
www.pc104.org
PC/104-Plus™ Specification
Version 2.0
www.pc104.org
PCI/104-Express™ Specification
Version 2.01
www.pc104.org
PCI Specification
Version 2.3 and 3.0
www.pcisig.com
ACPI Specification
Version 5.0
www.acpi.info
ATA/ATAPI Specification
Version 7 Rev. 1
www.t13.org
USB Specifications
www.usb.org
SM-Bus Specification
Version 2.0
www.smbus.org
Intel® Chipset Description
Intel® 8 Series Chipset Datasheet
www.intel.com
Intel® Chip Description
i210 Datasheet
www.intel.com
Realtek® Chip Description
ALC885/889 Datasheet
www.realtek.com.tw
Chrontel® Chip Description
Chrontel 7318C Datasheet
www.chrontel.com
American Megatrends®
Aptio™ Text Setup Environment (TSE) User Manual
www.ami.com
American Megatrends®
Aptio™ 4.x Status Codes
www.ami.com

Chapter: Connectors Features
page 12 ADL Embedded Solutions ADLE3800PC
3 Connectors
This section describes all the connectors found on the ADLE3800PC.

Connector Map Chapter: Connectors
ADL Embedded Solutions ADLE3800PC page 13
3.1 Connector Map
Please use the connector map below for quick reference. Only connectors on the component side are
shown. For more information on each connector refer to the table below.
Ref.-No.
Function
Page
P500
"SATA Interfaces"
p. 28
P501
"USB 3.0"
p. 25
P700/2
"COM1 and COM2"
p. 29
P701/3
"LAN"
p. 26
P704
"Audio"
p. 27
P705
"USB 2.0"
p. 24
P1200
"DVI/HDMI/VGA"
p. 22
P1201
"DisplayPort"
p. 23
P1300
"GPIO"
p. 30
P1301
"Power Supply"
p. 14
P1302
"System/SM-Bus"
p. 15
P1303
"Monitoring Functions"
p. 31
U600*
"Memory"
p. 16
P1100*
"PCI/104-Express Bus"
p. 19
P1101*
"PCI-Express Mini Card with mSATA"
p. 21
* not pictured (see bottom of the board)

Chapter: Connectors Power Supply
page 14 ADL Embedded Solutions ADLE3800PC
3.2 Power Supply
The power supply of the hardware module is realized via a 2x5-pin connector (Molex PS 43045-10xx,
mating connector: Molex PS 43025-10xx). Both 5V VCC/SVCC and 12V need to be provided. The 12V
input can be left unconnected if not required by attached peripherals.
The ADLE3800PC includes circuitry that will notify an intelligent power
supply to shut down if the processor reaches a critical temperature. This
is achieved by deasserting the (low-active) PS_ON# signal found on the
SM-Bus connector. When PS_ON# is no longer pulled low, an intelligent power supply would take
this as a signal to shut down power. For this to work, PS_ON# must be connected to the power
supply's PS_ON input. If PS_ON# is not otherwise connected, the ADLE3800PC can be damaged
beyond repair if a thermal shutdown event occurs. In rare instances, if power is not shut down,
the board will continue to heat up until failure occurs.
Since this is a 90 degree connector, the symbol in the drawing below
represents the connector face as seen from the side (PCB on bottom)
rather than from above.
Description
Name
Pin
Name
Description
12 volt supply
12V
1
6
12V
12 volt supply
ground
GND
2
7
GND
ground
ground
GND
3
8
SVCC
standby-supply 5V
ground
GND
4
9
GND
ground
5 volt supply
VCC
5
10
VCC
5 volt supply
NOTICE
NOTICE

System/SM-Bus Chapter: Connectors
ADL Embedded Solutions ADLE3800PC page 15
3.3 System/SM-Bus
Both SM-Bus signals, and signals e.g. speaker are provided through a 2x10pin connector (FCI
98424-G52-20LF, mating connector e.g. FCI 90311-020LF). For the #PSON signal, please refer to the
cautionary note in the chapter "Power Supply" (page 14).
Pinout 2x10 system connector:
Dsecription
Name
Pin
Name
Description
ATX Powerbutton
ATXPWRBTN#
1
11
GND
ground
reset to ground
RSTBTN#
2
12
GND
ground
battery
BATT
3
13
GND
ground
speaker
SPEAKER
4
14
VCC
5V supply
SATA LED
SATALED#
5
15
3.3V
3.3V supply
Rot / LED0
RED/LED 0
6
16
GREEN/LED1
green / LED1
Blau / LED2
BLUE/LED2
7
17
S3.3V
standby supply 3.3V
PS-ON
PSON#
8
18
S3.3V
standby supply 3.3V
Systembus clock
SMB-CLK
9
19
SMB-ALERT
Systembus alert
Systembus data
SMB-DAT
10
20
GND
ground

Chapter: Connectors Memory
page 16 ADL Embedded Solutions ADLE3800PC
3.4 Memory
There is one conventional SO-DIMM204 socket available to equip the board with memory (DDR3L-1333).
It is located on the bottom side of the board. For technical and mechanical reasons it is possible that
particular memory modules cannot be employed. Please ask your sales representative for recommended
memory modules.
With currently available SO-DIMM modules a memory extension up to 8 GByte is possible. The timing
parameters for different memory modules are automatically set by BIOS.
Pinout SO-DIMM204:
Description
Name
Pin
Name
Description
memory reference current
REF-DQ
1
2
GND
ground
ground
GND
3
4
DQ4
data 4
data 0
DQ0
5
6
DQ5
data 5
data 1
DQ1
7
8
GND
ground
ground
GND
9
10
DQS0#
data strobe 0 -
data mask 0
DM0
11
12
DQS0
data strobe 0 +
ground
GND
13
14
GND
ground
data 2
DQ2
15
16
DQ6
data 6
data 3
DQ3
17
18
DQ7
data 7
ground
GND
19
20
GND
ground
data 8
DQ8
21
22
DQ12
data 12
data 9
DQ9
23
24
DQ13
data 13
ground
GND
25
26
GND
ground
data strobe 1 -
DQS1#
27
28
DM1
data mask 1
data strobe 1 +
DQS1
29
30
RESET#
Reset
ground
GND
31
32
GND
ground
data 10
DQ10
33
34
DQ14
data 14
data 11
DQ11
35
36
DQ15
data 15
ground
GND
37
38
GND
ground
data 16
DQ16
39
40
DQ20
data 20
data 17
DQ17
41
42
DQ21
data 21
ground
GND
43
44
GND
ground
data strobe 2 -
DQS2#
45
46
DM2
data mask 2
data strobe 2 +
DQS2
47
48
GND
ground
ground
GND
49
50
DQ22
data 22

Memory Chapter: Connectors
ADL Embedded Solutions ADLE3800PC page 17
Description
Name
Pin
Name
Description
data 18
DQ18
51
52
DQ23
data 23
data 19
DQ19
53
54
GND
ground
ground
GND
55
56
DQ28
data 28
data 24
DQ24
57
58
DQ29
data 29
data 25
DQ25
59
60
GND
ground
ground
GND
61
62
DQS3#
data strobe 3 -
data mask 3
DQM3
63
64
DQS3
data strobe 3 +
ground
GND
65
66
GND
ground
data 26
DQ26
67
68
DQ30
data 30
data 27
DQ27
69
70
DQ31
data 31
ground
GND
71
72
GND
ground
clock enables 0
CKE0
73
74
CKE1
clock enables 1
1.5 volt supply
1.5V
75
76
1.5V
1.5 volt supply
reserved
N/C
77
78
(A15)
reserved
SDRAM bank 2
BA2
79
80
A14
address 14
1.5 volt supply
1.5V
81
82
1.5V
1.5 volt supply
address 12 (burst chop)
A12/BC#
83
84
A11
address 11
address 9
A9
85
86
A7
address 7
1.5 volt supply
1.5V
87
88
1.5V
1.5 volt supply
address 8
A8
89
90
A6
address 6
address 5
A5
91
92
A4
address 4
1.5 volt supply
1.5V
93
94
1.5V
1.5 volt supply
address 3
A3
95
96
A2
address 2
address 1
A1
97
98
A0
address 0
1.5 volt supply
1.5V
99
100
1.5V
1.5 volt supply
Clock 0 +
CK0
101
102
CK1
clock 1 +
Clock 0 -
CK0#
103
104
CK1#
clock 1 -
1.5 volt supply
1.5V
105
106
1.5V
1.5 volt supply
address 10 (auto precharge)
A10/AP
107
108
BA1
SDRAM bank 1
SDRAM Bank 0
BA0
109
110
RAS#
row address strobe
1.5 volt supply
1.5V
111
112
1.5V
1.5 volt supply
write enable
WE#
113
114
S0#
chip select 0
column address strobe
CAS#
115
116
ODT0
on die termination 0
1.5 volt supply
1.5V
117
118
1.5V
1.5 volt supply
address 13
A13
119
120
ODT1
on die termination 1
Chip Select 1
S1#
121
122
N/C
reserved
1.5 volt supply
1.5V
123
124
1.5V
1.5 volt supply
reserved
(TEST)
125
126
REF-CA
reference current
ground
GND
127
128
GND
ground
data 32
DQ32
129
130
DQ36
data 36
data 33
DQ33
131
132
DQ37
data 37
ground
GND
133
134
GND
ground
data strobe 4 -
DQS4#
135
136
DQM4
data mask 4
data strobe 4 +
DQS4
137
138
GND
ground
ground
GND
139
140
DQ38
data 38
data 34
DQ34
141
142
DQ39
data 39
data 35
DQ35
143
144
GND
ground
ground
GND
145
146
DQ44
data 44
data 40
DQ40
147
148
DQ45
data 45
data 41
DQ41
149
150
GND
ground
ground
GND
151
152
DQS5#
data strobe 5 -
data mask 5
DQM5
153
154
DQS5
data strobe 5 +
ground
GND
155
156
GND
ground
data 42
DQ42
157
158
DQ46
data 46
data 43
DQ43
159
160
DQ47
data 47

Chapter: Connectors Memory
page 18 ADL Embedded Solutions ADLE3800PC
Description
Name
Pin
Name
Description
ground
GND
161
162
GND
ground
data 48
DQ48
163
164
DQ52
data 52
data 49
DQ49
165
166
DQ53
data 53
ground
GND
167
168
GND
ground
data strobe 6 -
DQS6#
169
170
DQM6
data mask 6
data strobe 6
DQS6
171
172
GND
ground
ground
GND
173
174
DQ54
data 54
data 50
DQ50
175
176
DQ55
data 55
data 51
DQ51
177
178
GND
ground
ground
GND
179
180
DQ60
data 60
data 56
DQ56
181
182
DQ61
data 61
data 57
DQ57
183
184
GND
ground
ground
GND
185
186
DQS7#
data strobe 7 -
data mask 7
DQM7
187
188
DQS7
data strobe 7 +
ground
GND
189
190
GND
ground
data 58
DQ58
191
192
DQ62
data 62
data 59
DQ59
193
194
DQ63
data 63
ground
GND
195
196
GND
ground
SPD address 0
SA0
197
198
EVENT#
Event
3.3 volt supply
3.3V
199
200
SDA
SMBus data
SPD address 1
SA1
201
202
SCL
SMBus clock
termination current
VTT
203
204
VTT
termination current

PCI/104-Express Bus Chapter: Connectors
ADL Embedded Solutions ADLE3800PC page 19
3.5 PCI/104-Express Bus
Expansion modules for the PCI-Express bus can be connected to the board using the PCI/104-Express™
connector. This is a "type 2" connector with only those signals connected that are supported by the
chipset. "Stacking Error" functionality is available. For specifics, please refer to the PCI/104-Express™
documentation (rev. 2.01).
Pinout PCI104-Express connector (type 2):
Description
Name
Pin
Name
Description
USB Overcurrent
USBOC#
1
2
PERST#
PCIe reset
3.3V supply
3.3V
3
4
3.3V
3.3V supply
USB7 +
USB7
5
6
USB8
USB8 +
USB7 -
USB7#
7
8
USB8#
USB8 -
ground
GND
9
10
GND
ground
transmit lane 2 +
PEx1_1T
11
12
PEx1_0T
transmit lane 1 +
transmit lane 2 -
PEx1_1T#
13
14
PEx1_0T#
transmit lane 1 -
ground
GND
15
16
GND
ground
reserved
N/C
17
18
N/C
reserved
reserved
N/C
19
20
N/C
reserved
ground
GND
21
22
GND
ground
receive lane 2 +
PEx1_1R
23
24
PEx1_0R
receive lane 1 +
receive lane 2 -
PEx1_1R#
25
26
PEx1_0R#
receive lane 1 -
ground
GND
27
28
GND
ground
reserved
N/C
29
30
N/C
reserved
reserved
N/C
31
32
N/C
reserved
ground
GND
33
34
GND
ground
clock slot 2 +
PEx1_1C
35
36
PEx1_0C
clock slot 1 +
clock slot 2 -
PEx1_1C#
37
38
PEx1_0C#
clock slot 1 -
5V standby supply
SVCC
39
40
SVCC
5V standby supply
reserved
N/C
41
42
N/C
reserved
reserved
N/C
43
44
N/C
reserved
CPU direction
CPU_DIR
45
46
PWRGOOD
Powergood
SMBus data
SMBDAT
47
48
N/C
reserved
SMBus clock
SMBCLK
49
50
N/C
reserved
SMBus alert
SMBALERT
51
52
PSON#
PS ON
link reactivation
PEWAKE#
53
54
ST1-ERR#
stacking error 1

Chapter: Connectors PCI/104-Express Bus
page 20 ADL Embedded Solutions ADLE3800PC
Description
Name
Pin
Name
Description
ground
GND
55
56
GND
ground
reserved
N/C
57
58
N/C
reserved
reserved
N/C
59
60
N/C
reserved
ground
GND
61
62
GND
ground
reserved
N/C
63
64
N/C
reserved
reserved
N/C
65
66
N/C
reserved
ground
GND
67
68
GND
ground
reserved
N/C
69
70
N/C
reserved
reserved
N/C
71
72
N/C
reserved
ground
GND
73
74
GND
ground
reserved
N/C
75
76
N/C
reserved
reserved
N/C
77
78
N/C
reserved
ground
GND
79
80
GND
ground
reserved
N/C
81
82
N/C
reserved
reserved
N/C
83
84
N/C
reserved
ground
GND
85
86
GND
ground
reserved
N/C
87
88
N/C
reserved
reserved
N/C
89
90
N/C
reserved
ground
GND
91
92
GND
ground
reserved
N/C
93
94
N/C
reserved
reserved
N/C
95
96
N/C
reserved
ground
GND
97
98
GND
ground
reserved
N/C
99
100
N/C
reserved
reserved
N/C
101
102
N/C
reserved
ground
GND
103
104
GND
ground
stacking error 2
ST2-ERR#
105
106
LPCCLK
PCI clock
ground
GND
107
108
GND
ground
reserved
N/C
109
110
N/C
reserved
reserved
N/C
111
112
N/C
reserved
ground
GND
113
114
GND
ground
reserved
N/C
115
116
N/C
reserved
reserved
N/C
117
118
N/C
reserved
ground
GND
119
120
GND
ground
reserved
N/C
121
122
N/C
reserved
reserved
N/C
123
124
N/C
reserved
ground
GND
125
126
GND
ground
reserved
N/C
127
128
N/C
reserved
reserved
N/C
129
130
N/C
reserved
ground
GND
131
132
GND
ground
reserved
N/C
133
134
N/C
reserved
reserved
N/C
135
136
N/C
reserved
ground
GND
137
138
GND
ground
reserved
N/C
139
140
N/C
reserved
reserved
N/C
141
142
N/C
reserved
ground
GND
143
144
GND
ground
LPC address/data 0
LPCAD0
145
146
LPCDRQ#
LPC DMA request
LPC address/data 1
LPCAD1
147
148
LPCSIRQ#
LPC serial IRQ
ground
GND
149
150
GND
ground
LPC address/data 2
LPCAD2
151
152
LPCFRAME#
LPC frame
LPC address/data 3
LPCAD3
153
154
RTCBATT
battery 3.3V
ground
GND
155
156
GND
ground
5V supply
VCC
C1
5V supply
VCC
C2
12V supply
12V
C3