Emerson Quiet Cool EAPC12RD1 User manual

follow the basic precautions below:

follow the basic precautions below:

may differ from the one pictured above.

Press the Fan Speed button to select from Hi, Med, Low, or Auto.
The indicator light will illuminate above the current speed.
button to set the temperature.
M

M
adjusted
M
M
Press the Fan Speed button to select from Hi, Med, Low, or Auto. The indicator light will illuminate above
the current speed.
set the temperature.

function allows
The unit will start up in the mode it was set to prior to using the timer function.
To cancel the timer, press the timer button again. The Timer indicator light will turn off.
To cancel the timer, press the timer button again. The Timer indicator light will turn off.
M

back
Insert two new “AAA” 1.5V batteries (see instructions inside the remote section and add battery
compartment).
being

Always switch it off by pushing the POWER button and waiting a few minutes before
removing the plug, allowing the unit to perform its standard checks.
M
until the displays on the left side
of the LCD display next to the icon.
to choose
the Fan Speed. The will indicate the selected speed: Hi, Med, Low, or Auto.
set
M
until the arrow is next to the icon
In Dry Mode the fan will automatically turn on Low speed.
Note: In this mode, fan speed cannot be adjusted.
M
until the arrow is next to the icon

M
to activate Sleep Mode. In this mode, the fan speed will be set to Low
automatically and cannot be adjusted.
M
original
M
M M
M
eep

Choose the Mode, Fan Speed, and Temperature.
The delayed shutdown function can be used in any more.
confirm
is
with the previous settings.
the display will reset to stand-by.
M

of the window.

M
M
M
Prior to removing the garden hose, prepare a drip try (sold separately) to collect the
condensate from the drain outlet.
In order for the continuous drainage to function properly, please be sure the drain hose is
on a downward angle and the drainage location is lower than the drain outlet. (Fig. 22, 23)
Place
Place
Depending on the size of your drip tray, it may need
to be emptied multiple times during this process. (Fig. 19)

like
Drain the water collection tank completely and