Emerson GO NFC Logger User manual

GO NFC Logger
User Manual
Cargo Monitoring Solutions

2
Table of Contents
Introduction Page 3
Understanding the GO NFC Logger Page 4
Activating GO NFC Logger Page 5
Interpreting LED Alert Indicators Page 5
GO NFC Reader Mobile Apps Page 6
Supported Systems Page 6
Downloading Logger Data Page 6
NFC Cloud-Based Access Page 7
Understanding the Logger Data Page 8
GO NFC Pad Reader Page 9-10
Logger Placement Scenarios Page 11
GO GreenSense™ Recycling Program Page 12
Troubleshooting and FAQ’s Page 12
Lithium Battery Exception Page 13
Technical Specications Page 14
Technical Support Page 15

3
GO NFC Loggers monitor time and temperature of perishable products during distribution
and storage. Loggers are at and transfer data via short-range, near eld communications
(NFC) using phones and tablets. Logger data is immediately available via mobile application
or using the GO NFC Pad Reader. In addition, GO NFC Loggers leverage the capabilities of
Android and iOS phones and eliminate the need for proprietary readers. Data is easily sent to
any email address via the mobile application.
GO NFC Loggers use an innovative temperature sensor that enables them to take a surface
read of the object to which they are attached. This provides a closer approximation of actual
product temperature versus the general ambient readings provided by bulkier recorders.
Loggers sample temperature every minute for highly accurate temperature sensing, are
encased in waterproof packaging and each logger is NIST traceable. Because of the unique
physical characteristics of the sensor, ongoing calibration is not required to maintain
accuracy. All loggers are manufactured in ISO-9001 registered facilities.
Customers who are interested in maintaining 24/7 historical records can subscribe to cloud
upload capabilities where data can be accessed whenever needed.
Introduction

4
Understanding the GO NFC Logger
1. Product Part Number – A unique number that customers use to reorder additional loggers with the
same specication prole.
2. Temperature Alert Parameters – Signies the logger’s upper and lower temperature parameters.
Alerts will ash if these ranges are exceeded according to the logger’s programming.
3. Plastic Pouch – each logger is encased in a waterproof IP67 compliant IEC 60259 Standard, plastic
pouch.
4. LED Indicators – Give a quick visual indication if a product remained within t emperature
parameters. “Ok” LED will ash to indicate the logger is on. Single LED ashes indicate the logger is
actively recording time and temperature . Two ashes in quick succession means that the logger’s
memory is full.
5. Press+Hold Button – To start push the button a minimum of 2 seconds to activate the loggers.
Once logger is started, LEDs will ash in a sequence to indicate successful activation. Loggers should
be activated when the product is ready for shipment.
6. QR Code – Scan the QR code of the logger to gain access to the Emerson GO NFC Reader App.
7. In Use Life – Use life indicates how long the logger will log time and temperature.
8. Logger Serial Number and Barcode Representation – Each logger has a unique serial number
which differentiates it from other Emerson loggers. When information is downloaded from the
logger, it will be identied by this serial number.
8. Serial Number &
Barcode Representation
6. QR Code for app
download
5. Press + Hold Button
to start
4. LED Indicator
3. Plastic Pouch
2. Temperature Alert Parameters
1. Part Number
7. In-Use Life
Note that each logger is sealed in a waterproof plastic pouch.
DO NOT REMOVE Logger FROM PLASTIC POUCH.

5
Activating GO NFC Loggers
• LEDs ash in four second sequences and give a quick visual indication of whether a product
remained within temperature parameters.
• Flashing “OK” indicates product was always within acceptable temperature range; ashing amber
“Over/Under” symbols indicate the product drifted outside of acceptable range and the data
should be examined further via a data download.
• Upper and lower temperature parameters are pre- programmed by Emerson. By default,
each label has a 30-minute delay once temperature is out of range before the visual indicator
is triggered. There is also a 30-minute “cool down” phase where allows the logger to reach
equilibrium with the products environment this helps eliminate false alerts.
• Cool down periods do not appear in the graph of the mobile app and are not considered in
calculating trip temperature statistics.
Interpreting LED Alert Indicators
Note: Both the cool down period and the delay before a rst alert can be modied via custom
orders. If you have a custom logger and would like to learn more about how these elements are
dened, contact Emerson for more information.
Step 1: To activate the logger, press and hold power button located in the lower
right-hand corner of the logger for a minimum of 2 seconds.
Step 2: The logger LEDs will ash to indicate successful activation in a rotating
sequence towards the power button. The rotation sequence will occur 5 times.
Step 3: Pull clear plastic off glue dot on the back, apply logger to the provided
“Find It” sign and attach.
Step 4: Alternatively, apply logger directly to product packaging. LEDs will ash every four
seconds to indicate active monitoring.

6
Visit Emerson.com/GONFC for App download and product information. Also, the user
can scan the QR Code printed on the GO NFC Logger or visit your mobile app store.
GO NFC Reader Mobile App
1. Open the GO NFC Logger Reader Mobile App. (iOS or Android)
2. Conrm your mobile phone’s NFC capabilities are turned on. If NFC is turned OFF, the app
will alert you and provide directions on how to change the setting.
3. Place your device within one inch (2.5 cm) of the GO NFC Loggers (phones or distance may
vary) . iOS Version offers short tutorial video upon using app for the rst time.
4. Consider turning on “Notications” on your phone. This will provide audible indications of
data transfer activities. This is found via the “Settings” icon of your mobile phone, “Sound
and Notication.”
5. Data from loggers will be downloaded and saved to device.
Downloading Logger Data
• Any Android 4.1 or newer with NFC reader. NOTE: Not all Android devices are NFC-enabled.
• iPhones 7 or newer; iOS 9 or newer.
Supported Systems
Android/iOS

7
NFC Cloud-Based Access
GO NFC Logger data scanned from Android, iOS devices or GO NFC Pad Reader can be ac-
cessed anytime via a secure online portal. Contact your sales representative to enable this
feature for a minimal fee per logger.
From the app settings, access to
“Login to Portal” is available
Logger data can
automatically be sent to
the cloud with each scan.

8
The app will bring up a display of the logger’s information when rst read. Serial number and part
number are displayed at the top. Also, at the top right is a menu that allows you to share logger data
and change the app settings. Below the logger serial number are several tabbed areas that include the
following:
Understanding the Logger Data
1. Summary Tab - displays general information for the logger including: status and temperature
statistics. If congured with alerts, a summary of the alert condition is displayed.
2. Alerts Tab - if the logger is congured with alerts, the Alerts tab will display detailed information
about each alert that was triggered while the logger was recording.
3. Graph Tab - displays the temperatures recorded by the logger in graph format. If the logger is
congured with alerts, the alert limits are displayed on the graph.
4. Table Tab - displays the temperatures recorded by the logger in a table format. If the logger is
congured with alerts, important temperatures are color coded to indicate excursions
Once read, logger data is stored in your device’s internal memory. Read History screen displays a list
of labels read by your device. Selecting a label reading will display that readings’ detailed information.
For Android press and hold. For iOS swipe left. This will give you the option to delete a single reading.
Going to the settings from any screen allows you to change the displayed temperature units and clear
all logger reads from the phone.
1) Label Summary 2) Alerts 3) Temperature Graph 4) Table Summary
Note that time will correspond to the time on your mobile device.

9
GO NFC Pad Reader & Desktop Software
The GO NFC Pad Reader and desktop software provides an easy
and convenient alternative to reading the data with using a mobile
app. Follow these simple steps to complete set-up:
Step 1: Download the GO NFC Pad Reader version software
located at Emerson.com/GONFC. Note: Windows Software
compatible for both 32 bit and 64 bit computers; Mac
software available for Apple computers.
Step 2: Plug in the HID OMNIKEY Pad Reader into computer. The
device driver will download automatically.
Step 3: Place the GO NFC Logger on top of the pad reader. Note:
only one logger can be scanned at a time.
Step 4: The Desktop software can be used with a username, password
account or in ofine mode when no internet connection is
available.
Step 5: To retrieve data, click Scan Logger. (The home screen will be
blank when user rst logs in and newly scanned loggers will
always appear at the top of the list)
• High-level information is displayed as a list: serial number,
part number, activation and read timestamp, and trip
duration.
• Temperature alerts are indicated by icons: A Snowake
indicates a lower limit, a Sun indicates upper limit. The “Scan Logger” button
is near the top in the
GO NFC Reader software

10
GO NFC Pad Reader & Desktop Software
Step 6: Viewing the Details
Click Details button
to view Alert Statistics,
Alert Details,Temperature data,
and the Temperature Graph for
individual loggers.
By clicking the historical data
button it will show recently
scanned loggers (up to 100
loggers). Additional historical
records are available in the
online portal.
Step 7: Exporting Reports
From the Details page click Download CSV or Download PDF & save to a desired directory .
List of scanned loggers.

11
The form factor of the GO NFC Logger promotes its use
in a variety of scenarios including at the pallet, carton
and product level.
Logger Placement Scenarios
Pallet Level - Many customers apply GO NFC Loggers to
the side of a pallet. Emerson provides signage and clear
plastic pouching to facilitate locating loggers on pallets at
the receiving end as depicted in the photo to the right.
Many customers place several GO NFC Loggers on
different pallets within a load to perform temperature
mapping. This promotes broader sampling and
provides more detailed information on the temperature
uctuations experienced within a container.
Carton Level - Many customers with high-value
product where temperature specications are
critical may choose to use GO NFC Loggers on each
individual carton inside a master case.
Product Level - Loggers are sealed in a plastic pouch
and take surface reads of the object to which they are
attached. They can be placed in or laid directly on top
of product for highly accurate temperature reads.
In order to facilitate nding GO NFC temperature
monitoring loggers, it is recommended that placement
of loggers be clearly agged on the outside of
packaging. Emerson provides customers with a brightly
colored “Find It” signs upon request.

12
GO NFC Loggers can be easily recycled through the GO GreenSense program. GO GreenSense is a
recycling program that facilitates the return of Emerson temperature monitoring loggers for proper
battery and component recycling. Through the GO GreenSense program, Emerson provides customers
with eco-friendly return boxes and pre-paid postage return labels free of charge. Unlike bulky
traditional temperature monitoring devices, customers can t hundreds of temperature loggers in the
provided medium-sized box. GO GreenSense takes the hassle out of returning loggers for recycling. For
more information, email [email protected]om or call [phone].
GO GreenSense™ Recycling Program
Q: Where to download apps?
A: To download the GO NFC app go to your mobiles app store which is available in Android and iOS.
Q: What are other methods to download software?
A: You can download the software at Emerson.com/GONFC, which is available in Windows and Mac OS.
Also available in multiple languages.
Q: I cannot get my device to read a logger or it displays an error message while reading.
A: Try the following suggestions:
• Verify your device has an NFC reader.
• Turn on notications and increase the volume so you can hear the tones that indicate a logger is
being read.
• Reposition the logger until it starts reading, then hold it still.
• Consult your device documentation for help nding the NFC reader position on your mobile device.
Q: Why are my loggers LED lights ashing twice in rapid succession?
A: This indicates the memory of your logger is full.
Q: Why doesn’t my logger have any upper or lower LED alert indicators?
A: Your logger is likely a data logger only without specied alert parameters.
Troubleshooting and FAQ’s
Lithium Battery Exemption
Batteries utilized in GO NFC Logger contain less than 0.1 grams of
lithium metal per cell, are individually wrapped, and are therefore
acceptable for use on airplanes. Supporting documentation is available
by contacting Emerson Support.

13
Technical Specications
Alarm Congurations: Upper/lower/both/none, alerts may be
consecutive (default) or cumulative
Alarm Indicators: LEDs indicate temp over/under/OK
Calibration: Silicon based sensor is calibrated at the time of
manufacture by Texas Instruments
Certications: FCC, IC, CE, RCM, Chile, Peru, RoHS, China
RoHS, WEEE
Housing: NEMA 6/IP67 dust and water resistant; FDA
21 CFR compliant food-grade packaging
Memory: 4K EEPROM, 1922 hard data points
NIST Traceable: Yes
Operating Environment: -25°C to 60°C (-13°F to 140°F)
Read Range: Up to 2” (5.08 cm)
Reading Redundancy: GO NFC Pad Reader
Recycle Options: GO GreenSense™ Program
Shelf Life: 15 months
Size: 2.4” x 3.4” (61mm x 81mm)
Start Delay: Standard 30 minutes, congurable 0 to
1275 minutes
Supported Readers: Android™ 4.1/ iPhone® 7 or newer with
the NFC app, NFC-enabled tablets, NFC Pad
Reader with software Mac and Windows
compatible
Temperature Accuracy: -25°C to 60°C (-13°F to 140°F): ±0.5°C (0.9°F)
Temperature
Resolution:
0.1°C
Temperature Sampling Frequency: 1 minute
Temperature Units: °F and/or °C
Weight: 0.5 oz (14.2 g)

14
TE.UM.Rev1.0219 Emerson is a trademark of Emerson Electric Co. or one of its afliated companies.
©2019 Emerson Electric Co. All rights reserved.
Technical Support
Technical Support is available 24 hours a day, 7 days a week.
We’re with you every step of the way.
Toll Free: [phone]
Emerson.com/Cargo
CargoSuppor[email protected]om
Live Chat