Emerson NickJr Dora the Explorer DTE328 User manual

DVD Player
with Remote Control
Copyright 2005 Viacom International Inc. All Rights Reserved. Nickelodeon, Nick Jr., Nicktronics,
Dora the Explorer and all related titles, characters and logos are trademarks of Viacom
International Inc.
OWNER’ S MANUAL
DTE328
DTE328 Covers_072105.p65 22/7/2005, 10:571

0 1
Welcome...…
Emerson Radio Corp. has produced this audio/video product
under license from Nickelodeon. We have taken great care to
make sure your unit was in perfect working order when it left
ourfactory.
Thank you for purchasing this Compact Audio/Video System.
This state of the art system includes everything you need
to experience digital video and audio in the comfort of
your own living room. The only thing you need to add is
your own TV. We have designed this system to be easy
to set up, and even easier to use. But please, review this
manual before you operate your system. Have it handy
while you are setting the system up. Keep it available for
future reference in the unlikely event that you encounter
any unexpected problems. The manual begins with a
description of the important controls on the main unit and
the remote. It then explains how to connect your TV, and
how to operate the DVD/CD player. If you follow the
instructions carefully you can have the system up and
operating in less than an hour.
All of the optional system settings have been preset at our
factory for correct operation of the system in North America.
All you have to do is insert a disk, sit back, and enjoy a great
audio/videoexperience.
Eventually you may want to change some of the optional
settings. A description of all the optional settings, and
instructions for changing them, is found in the second half of
themanual.
This system was designed to provide you with many
years of reliable operation with a minimum of care and
maintenance. Every component in your system was in
perfect working condition when it left our factory. If you
experience any problems with the set up or operation of
this system please review the Trouble Shooting Guide at the
end of this manual before you contact your dealer or the
Emerson Customer Service Department.
Warning
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet.
Refer servicing to qualified service personnel
only.
The AC cord must only be changed at qualified
service facility.
lThis appliance is classified as a CLASS 1 LASER product.
lThe CLASS 1 LASER PRODUCT MARKING is located on
therearpanel.
lThis product contains a low power laser device. To ensure
continued safety, do not remove any cover or attempt
to again access to the inside of the product. Refer all
servicingtoqualifiedpersonnelonly.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision
Corporation.Reverseengineeringordisassemblyisprohibited.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
4,819,098and 4,907,093 licensed for limitedviewinguses only.
Caution
Refer servicing to qualified service personnel only.
The rating label and caution marking is located at the bottom
oftheunit.
This symbol is intended to alert the user
of the presence of uninsulated “dangerous
voltage” within the product enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literatureaccompanyingtheapplicance.
The symbol for class II (Double insulation)
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM1

2
IMPORTANTSAFETYINSTRUCTIONS(CONTINUED)
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions
and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor
antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS
Thesafetyandoperatinginstructionshouldberetainedforfuturereference.
3. HEED WARNINGS
All warning on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
Alloperatinganduseinstructionsshouldbefollowed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the product’s manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water- for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force,
and uneven surface may cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom of the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of
thetype of power supply to your home, consultyourappliance dealer or local power company. For productsintendedto operate
from battery power, or other sources, refer to the operating instruction.
11. GROUNDING OR POLARIZATION
This product is equipped with an alternating-current line plug (a plug having one blade wider than the other). This plug will
fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
theappliance.
13. LIGHTNING
To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
14. POWER LINES
Anoutsideantennasystemshouldnotbelocatedinthevicinityofoverheadpowerlinesorotherelectriclightorpowercircuits,
or where it can fall into such powerlines or circuits. When installing an outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as contact with them might be fatal.
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM2

2 3
IMPORTANTSAFETYINSTRUCTIONS(CONTINUED)
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection
against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70, provides
information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to grounding
electrodes,andrequirementsforgroundingelectrode.
18. SERVICING
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer
or those that have the same characteristics as the original part. Unauthorized substitution may result in fire, electric shock or
other hazards.
20. SAFETY CHECK
Uponcompletionofany service or repairs to this product, ask the service technician to perform safety checks to determine that
theproductisinproperoperatingcondition.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
bytheoperatinginstructions, as an adjustment of other controls may result on damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including
amplifiers)thatproduceheat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM3

4
IMPORTANTSAFETYINSTRUCTIONS(CONTINUED)
Any use of the controls or an adjustment to the procedures other than those specified herein may result in hazardous radiation.
TOREDUCE THE RISK OF ELECTRIC SHOCK,DONOT REMOVE COVER (OR BACK). THEREARENO USER-SERVICEABLE
PARTSINSIDE. PLEASE REFER ANYSERVICING TOQUALIFIED SERVICEPERSONNEL.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user'sauthority to operate the equipment.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
=Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
FCC CAUTION:
To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to
other devices. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM4

4 5
Table of Contents
Warnings and Cautions
Welcome .......................................................................................1
UL Safety Instructions ..............................................................1-3
FCC Notice .....................................................................................4
FCC Caution ...................................................................................4
Basic System Information
Index .............................................................................................5
Location of Controls & Indicators .......................................................6
Location of Jacks and Terminals ........................................................7
Remote Control ...............................................................................8
Important Safeguards and Precautions .............................................9
Features of This System .................................................................10
ImportantInformationRegardingThis Manual ....................................10
High Quality Digital Audio ...............................................................10
Compatiblewith a wide range of DVD DigitalAudio Output Formats .10
Locale Management Information .....................................................10
Types of DiscsThatCanbePlayed on This System ............................11
Notes on Disc Handling ..................................................................12
Installations and Connections
Unpacking ....................................................................................13
InsertingBatteries into the RemoteControl .......................................13
Protect Your Furniture ...................................................................13
TVand Optical Component Connections ..........................................14
Connectingthe AC powerCord ........................................................14
DVD Playback
Basic Play ....................................................................................15
Skipping Chapters or Tracks ...........................................................16
Slow-motion play by remote control only ..........................................16
Selecting Scenes by Chapter Number .............................................16
Selectinga Start Point usingthe TimeCode......................................17
Selecting Scenes by Title Number ..................................................17
Selecting by Track Number .............................................................17
Repeat Play ..................................................................................18
Repeatsectionsbetweentwospecificpoints(Repeat A-B) .................18
Random Play ................................................................................18
Program Play ...............................................................................19
Changingthe Audio Output Signal AudioCDs ...................................19
CD-R/RW and MP3 playback .........................................................20
Playing MP3 Audio CDs .................................................................20
Selecting a Folder Menu ............................................................20
Picture CD Operation ....................................................................20
Convenient Functions
ChangingAudio Soundtrack Language .............................................21
Viewing from another angle ............................................................21
Clearing & Displaying of Subtitles ....................................................21
Changing Subtitle Language ...........................................................22
Selection of Titles ..........................................................................22
Using a DVD Menu ........................................................................22
Audio CD Playback .......................................................................23
Basic Play ....................................................................................23
When the unit is not in use ..............................................................23
Setting and Adjustments
TV Type .......................................................................................24
Screen Saver ................................................................................24
TV System ...................................................................................24
Parental Control: Password ............................................................25
Parental Control: System Set up .....................................................25
Default .........................................................................................25
On Screen Display Language .........................................................25
Audio Language ............................................................................26
Subtitle Language .........................................................................26
Menu Language .............................................................................26
Audio Out .....................................................................................27
Downmix ......................................................................................27
Dynamic Range ............................................................................27
Other Functions
Zoom ...........................................................................................28
Common Procedure ......................................................................28
3D Sound .....................................................................................28
SRND ..........................................................................................28
EQ ..............................................................................................29
Band ............................................................................................29
Key ..............................................................................................29
Bookmark .....................................................................................30
Key Lock ......................................................................................30
Digest ..........................................................................................30
Additional Information
Troubleshooting ...................................................................31-32
Contact Customer Service ..............................................................32
Warranty ......................................................................................33
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM5

6
6. REMOTE SENSOR
Receivesthe commandsfrom theRemote Handset.
7. STOP < Button
Stop playing the disc.
8. PAUSE ; Button
Press to pause playback.
9. PLAY 4 Button
Press to begin playback.
10. DISC COMPARTMENT
1. STANDBY Button
Turns the system on or off. Main Power Switch must
be in the “ON” position.
2. STANDBY LED Indicator
The indicator lights up to indicate standby mode.
3. SKIP REVERSE 9 Button
Skip to previous chapter.
4. INFRA-RED INDICATOR(for remote)
5. SKIP FORWARD : Button
Skip to next chapter.
LOCATION OF CONTROLS AND INDICATORS
MAIN UNIT (Front View)
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM6

6 7
LOCATION OF JACK AND TERMINALS
MAIN UNIT (Back Panel)
1. AC Power Cord
2. AUDIO OUT L/R Jacks
3. VIDEOOUT Jack
4. COAXIALDIGITALOUT Jack
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM7

8
REMOTE CONTROL
1. KEYLOCK Button
2. NUMBER0 TO 9 Button
3. DVDMENU Button
4. AUDIOMODE Button
5. TITLEMENUButton
6. SUBTITLEMENU Button
7. PBCButton
8. 3DButton
9. DISPLAYButton
10. NAVIGATION ( Ù /Ú / < / > ) Button
11. RETURNButton
12. BOOKMARK Button
13. STOP<Button
14. SLOW/RButton
15. PAUSE/STEPButton
16. SEARCHREVERSE 7 Button
17. RANDOM Button
18. MUTE Button
19. REPEATButton
20. REPEATA-BButton
21. SEARCHFORWARD 8 Button
22. SKIP FORWARD :Button
23. SKIP REVERSE 9 Button
24. SLOW/FButton
25. PROGRAMButton
26. SEARCHButton
27. ENTER Button
28. PLAY 4 Button
29. SETUPButton
30. ANGLEButton
31. AUDIOMENU Button
32. ZOOMButton
33. CLEARButton
34. DIGESTButton
35. STANDBY ON/OFFButton
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM8

8 9
Power Cord Protection
To avoid any malfunctions of the unit, and to protect against
electric shock, fire or personal injury, please observe the
following:
Hold the plug firmly when connecting or disconnecting the
AC power cord.
Keep the AC power cord away from heating appliances.
Never put any heavy object on the AC power cord.
Donot attempt to repair or reconstruct the ACpower cord in
anyway.
Location and Handling
Air vents are provided in the cabinet to prevent excessive
temperaturesinside the unit. Do not place thisunitin closed
spaces, cover it, or otherwise block the vents.
Donot place thisunitin direct sunlight,or near heatsources.
Keep this unit away from strong magnetic objects.
Do not insert or drop anything into this unit through the
air vents as this could cause serious damage possibly
resultinginfire.
Donotplaceanyobject containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or
service center immediately.
Do not remove the cabinet. Touching parts inside the
cabinet could result in electric shock and / or damage to
theunit.
Do not use the unit in a car. The operation can not
guaranteed.
Non-Use Periods
When the unit is not being used, turn the unit off.
When left unused for a long period of time, the unit should
beunpluggedfrom the household AC outlet.
No Fingers or Other Objects Inside
Do not put any foreign object on the disc tray.
Stacking
Placethe unit in ahorizontalposition, and do notplaceanything
heavyon it.
Condensation
Moisture may form on the pickup lens in the following
conditions:
Immediatelyafteraheaterhasbeen turned on.
In a steamy or very humid room.
When the unit is suddenly moved from a cold environment
to a warm one.
If moisture forms inside this unit, it may not operate properly.
In this case, turn on the power and wait about one hour for the
moisturetoevaporate.
On Adjusting Volume
Do not turn up the volume while listening to a portion with
very low level inputs or no audio signals. If you do, the
speakers may be damaged when a peak level portion is
played.
If There is Noise Interference on the TV While a
Broadcast is Being Received
Depending on the reception condition of the TV, interference
mayappearontheTV monitor while you watch a TV broadcast
and the unit is left on. This is not a malfunction of the unit or
the TV. To watch a TV broadcast, turn off the unit.
Service
Do not attempt to service the unit yourself.
Please call 1-800-898-9020 for the name of the nearest
service center.
Copyright
Audio-visual material may consist of copyrighted works which
must not be recorded without the authority of the owner of
the copyright. Please refer to relevant laws covering copyright
protection.
Copy protection
This DVD player supports Macrovision copy protection.
On DVD discs that include a copy protection code, if the
contents of the DVD disc are copied using a VCR, the copy
protection code prevents the videotape copy from playing
normally.
Recommended measures for Optimum Performance
This unit is a precision device that is constructed using
extremely accurate technology. Soiling or friction affecting
the pickup lens or disc drive can impair the image quality.
In the worst case, neither video nor audio will be played back.
To obtain optimum picture quality, the player should be
checked (cleaning and replacement of some parts) every
1,000 hours. Note that this period varies depending on the
environment (temperature, humidity, dust, etc..) in which the
player is used.
Do not attempt to clean the pickup lens yourself.
Notes:
Periodically inspect for damage, if damaged properly
repair the DVD player before use.
Adult supervision recommended.
Important Safeguards and Precautions
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM9

10
Features of This System
DVDplayerwith Dolby Digital* Audio output.
Compatible with DVD, MP3, CD-R/RW, KODAK PHOTO CDs and CD discs.
DVDnavigation functions.
On screen display menu.
Fullfunctionremotecontrol.
* Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished Works. ã1992-1997 Dolby Laboratories, Inc. All rights
reserved.
* "DTS" and "DTS Digital" are trademarks of Digital Theater System, Inc.
Important Information Regarding This Manual
The types of functions and operations that can be used for a particular disc vary depending on the features of that
disc. In some cases, these functions and operations may differ from the descriptions given in this Operations
Manual. In this event, follow the instructions given on the screen. This Operations Manual only covers basic disc
operations.
For some operations, the "INVALID KEY" statement may appear on the screen. This indicates that the operation described in
this Operations Manual is not available on the disc in the player.
Thedrawings about the TVscreen used in thisOperations Manual are purelyfor the purposes ofexplanation. The actual displays
may differ slightly from what are shown here.
High Quality Digital Audio
With the linear PCM sound of 48 kHz /16 bit through 96 kHz / 20 bit, audio quality exceeding that of audio CDs is possible.
Compatible with a wide range of DVD Digital Audio Output Formats
DVDsarerecordedinoneoffourtypesofdigitalaudioformats(asofOctober1998).Thedigitalaudiooutputjack of this player can
outputDolbyDigital*, DTS**, MPEG, and linear PCM digital bitstreams.
Locale Management Information:
This DVD player is designed and manufactured to respond to the Locale Management Information that is recorded on a DVD disc.
If the Locale number described on the DVD disc does not correspond to the Locale number of this DVD player, this DVD player
cannot play that disc.
DTS stands for Digital Theater System. DTS is a Surround System different from Dolby Digital that has become a popular
surround sound format for movies, as well as CDs. To be able to enjoy the surround sound of DTS audio, the digital audio
jack of this player needs to be connected to an AV amplifier/receiver or to a DTS decoder. DTS audio is not output from the
L/R audio jacks.
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM10

10 11
TYPES of DISCS That Can be Played on This System
This player can playback discs bearing any of the following marks:
Note-1
DVD players and discs are designed with region numbers
which dictate the regions in which a disc can be played. If
the region number on the disc you want to play does not
match the region number in your DVD player, you will
not be able to play the disc. If you try to play the DVD, the
message “WRONG REGION” will appear on the screen
display.
The region number for this DVD player is .
The region code of this player is printed on the rear of the unit.
Note-2
The specific playback functionality for some DVD and
video CD discs is determined by the disc manufacturer.
Because this DVD player plays disc data in accordance
with the disc manufacturer’s guidelines, some functions
may not be available on some discs. Be sure to read the
instructions provided with the disc.
The “Prohibited” statement displayed during DVD player
operation indicates that such manufacturer imposed
restrictions apply.
Note-3
The audio on a DVD disc recorded in MPEG version 2.0
format may not play properly on some discs, only the
image will appear in this case.
Discs that Cannot be Played
Youcannotplay CD-G,CD-EXTRA,CD-ROMandDVD-ROM
discs.
You cannot play illegally produced discs.
You cannot play scratched discs.
You cannot play discs that are dusty, soiled or marked with
fingerprints.
Icons used on DVD discs
SampleIcons:
Glossary of Disc Terms
Title (DVD)
The longest sections of picture or a music piece on a DVD,
a movie, etc., for a picture piece on a video disc; or an
album, etc., for a music piece on an audio disc. Each title
is assigned a title number enabling you to locate the title
youwant.
Chapter(DVD)
Sections of a picture or a music piece that are smaller
than titles. A title is composed of several chapters. Each
chapter is assigned a chapter number enabling you to
locate the chapter you want. Some discs may not contain
chapters.
Track (Audio CD)
Sections of a music piece on an audio CD. Each track is
assigned a track number enabling you to locate the track
youwant.
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM11

12
Notes on Discs
Disc handling precautions
To keep the disc clean, handle the disc by its edge. Do not touch the surface.
Do not stick paper or tape on the disc.
If there is glue (or a similar substance) on the disc, remove the glue completely before using the disc.
Do not expose the disc to direct sunlight or sources such as hot air ducts, or leave it in a car parked indirect
sunlight as there can be considerable rise in temperature inside the car.
After playing, store the disc in its case.
Do not write on the label side with a ball-point pen or other writing utensils.
Be careful not to drop or bend the disc.
Disc cleaning precautions
Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.
Donot use solvents such asbenzine, thinner, commerciallyavailable cleaners or anti-static sprayintended for vinyl
LPs.
Disc installing precautions
Do not install more than 1 disc on disc tray.
Do not place the disc on the tray up-side down.
Do not try to close the disc tray when the disc is not installed and centered properly.
Dora DTE328_engP01-12.p65 7/27/05, 9:14 AM12

12 13
Inserting Batteries into the Remote
Control
You can control the system using the supplied remote. Insert
two "AA" batteries by matching the + and - on the batteries
with the markings in the battery compartment. When using the
remote, point it at the remote sensor on the front panel of this
system.
Notes:
Do not leave the remote in an extremely hot or humid place.
Do not use a new battery with an old one.
Do not drop any foreign object into the remote casing,
particularlywhenreplacing the batteries.
Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
If you do not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakageandcorrosion.
Use only the size and type of batteries specified.
Be sure to follow the correct polarity when installing the
batteriesasindicated in the battery compartment. Reversed
batteries may cause damage to the device.
Donotmix different types of batteries together (e.g. Alkaline
and Carbon-zinc) or old batteries with fresh ones.
Unpacking
Check that you have the following items:
Main unit (1).
Remote control (1).
Audio/Video cable (4 feet x 1).
Owner’sManual (1).
Installation
This section describes how to connect the system to a TV monitor with audio/video input jacks. You cannot connect this system
to a TV monitor which does not have a video input connector. Be sure to turn off the power of each component before making
the connections.
Protect Your Furniture
This model is equipped with non-skid rubber 'feet' to prevent
the product from moving when you operate the controls.
These 'feet' are made from non-migrating rubber material
specially formulated to avoid leaving any marks or stains on
your furniture. However certain types of oil based furniture
polishes, wood preservatives, or cleaning sprays may cause
the rubber 'feet' to soften, and leave marks or a rubber residue
on the furniture. To prevent any damage to your furniture we
strongly recommend that you purchase small self-adhesive
feltpads,availableathardwarestoresandhomeimprovement
centers everywhere, and apply these pads to the bottom of
the rubber 'feet' before you place the product on fine wooden
furniture.
Dora DTE328_engP13-24.p65 7/27/05, 9:17 AM13

14
TV and Optional Component
Connections
Required cords
Video cord for connecting a TV set (included).
Audiocords(included).
When connecting a cord, be sure to match the color-coded
pins to the appropriate jacks on the components.
Notes:
TV Connection-Normal (Connection Cable Included):
To view the video from DVD discs on your TV set connect
the Video Out jack of this system to the Video ln jack of
yourTV set. The Videojacksare usually colored yellow.Use
the included video cable with yellow plugs on each end.
TV Connection-Audio (Connection Cables Included):
Connect the Left/Right audio output jacks of your system to
the Left/Right audio input jacks of the TV set.
External Decoder Connection-Not Required:
The Coaxial Digital Audio output jack allows digital audio
signals to be fed to an external Dolby Digital or DTS
decoder if desired. The Coaxial digital audio connection
cable is not included.
Connecting the AC Power Cord
Notes:
The Power Requirement is: AC 120V, 60Hz.
Connecting to power other than the one listed above may
damage the system or cause abnormal operation.
Before connecting the AC power cord of this system to a
wall outlet, connect the speakers and other component
cables to the system.
Connect the AC power cords of your TV and any optional
connect to a wall outlet.
Dora DTE328_engP13-24.p65 7/27/05, 9:17 AM14

14 15
DVD Playback
Preparations
Switch on the TV set power and select "Video" as the TV
input.
Switch on the stereo system's power if the player has been
connected to a stereo system.
Basic Play
1. Press down on the disc compartment lid (OPEN/CLOSE) to
open the disc compartment.
2. Place a disc into the disc compartment.
Holdthediscwithouttouchingeitherofitssurfaces and with
the printed title side facing up. Align it with the guides and
place it in its proper position.
3. Close the disc compartment.
4. Press the PLAY 4 button if the movie has not started
automatically.
If the disc has one or more titles recorded on it, a menu
screen will appear on the TV screen after a few moments.
5. Select the preferred title by using the ( <,>,Ù,Ú )
Navigationbuttons,followedbytheENTER button, or press
the number button corresponding to the menu.
Play of the seleted title now commences.
When the menu continues onto another screen
After step 3 on previous page, press SKIP :.
To return to the previous menu screen, press SKIP 9.
For further details, refer also to the disc jacket.
Stopping play and returning to the menu screen
Press the DVD MENU button.
Play is suspended and the menu screen is displayed.
When the unit is not in use
When the unit is not in use, remove the disc and press the
STANDBYbuttonto turn offthe power. The STANDBY indicator
willilluminate.
Notes:
The disc continues to rotate while the menu is displayed
even after the player has finished playing a particular item.
When no further selections are to be played, be sure to
press the STOP <button to clear the menu display.
If the disc is placed in upside down, the On Screen Display
will indicate "CHECK DISC".
For your reference
When "INVALID KEY" appears on the TV screen while a
button is being operated, it means that the corresponding
operationis prohibited by the player.
Stopping play
Press the STOP <button.
For your convenience
When play is stopped, the unit records the point when
STOP <was pressed (RESUME function). Press PLAY 4
again and play will resume from this point. When the tray
is opened or STOP <is pressed again, the RESUME
function will be cleared. The RESUME function works only
withdiscsfor which the elapsed playing time appears during
playback.
Still picture
Press the PAUSE/STEP button during play.
To return to normal play
Press PLAY 4.
Frame advance
Press the PAUSE/STEP button to advance to still picture
mode.
Press PAUSE/STEP until the desired frame is displayed. The
disc is advanced one frame each time the PAUSE/STEP
button is pressed.
Dora DTE328_engP13-24.p65 7/27/05, 9:17 AM15

16
Skipping Chapters or Tracks
Skipping ahead
Press SKIP :during play.
A chapter is skipped each time the button is pressed.
Skipping back
Press SKIP 9during play.
Slow-motion Play by Remote Control
Only
Pressthe SLOW/R or SLOW/F button(s)duringplay.Each time
you press the button, the speed changes from: 1/2, 1/3, 1/4,
1/5, 1/6, 1/7.
To return to normal play
Press PLAY 4button.
Search: rapid advance-rapid reverse
Press the SEARCH 7 or 8 button(s). Each time you press
the button, the speed change from: x2, x4, x8, x20.
BACKWARD x27= Fast Reverse 1
BACKWARD x47= Fast Reverse 2
BACKWARD x87= Fast Reverse 3
BACKWARD x20 7= Fast Reverse 4
FORWARD x2 8= Fast Forward 1
FORWARD x4 8= Fast Forward 2
FORWARD x8 8= Fast Forward 3
FORWARD x20 8= Fast Forward 4
To return to normal play
Press the PLAY 4 button.
Selecting Scenes by Chapter Number
Example: Starting play from Chapter 29.
1. Press the SEARCH button during play.
2. Press the Number button(s) to select the preferred chapter.
Example: Press ' > ', ' > ', ' > ', ' 2 ' , ' 9 '.
3. Press the ENTER button. Play now commences from
Chapter29.
Note: Depending on the disc used, it may not be possible to
performthese operations during DVD menu play.
For your reference
"INVALID KEY" appears on the TV monitor if the number
selected does not exist on the disc.
Dora DTE328_engP13-24.p65 7/27/05, 9:17 AM16

16 17
Selecting a Start Point using the Time
Code
Example: Viewing after 1 hour 3 minutes have elapsed from
the title start.
1. Press the SEARCH button once during play.
2. Press the Navigation ( > ) button to enter the time digits.
The cursor changes the color of the time digit.
3. Press the Number button(s) to specify the starting position.
Example: To specify "1 hour 3 min.00sec.", press ' > ', ' 0 ',
' > ', ' 1 ', ' > ', ' 0 ', ' > ', ' 3 ', ' > ', ' 0 ', and
' > ', ' 0 '.
4. Press the ENTER button. Play now commences from the
specifiedposition.
Notes:
This operation works only with discs for which the elapsed
playing time appears during playback.
For some discs, play may not start from the specified
position even when the steps above have been performed
correctly.
Depending on the disc used, it may not be possible to
performthese operations during DVD menu play.
Selecting Scenes by Title Number
Example: Viewing title ' 2 '
1. Press the SEARCH button during play.
2. Use the ( < ,> ) Navigation buttons to move the cursor to
theTitlebox.
3. Press the Number button(s) to select the preferred title.
Example: To specify Title 2, press ' > ', ' 0 ', ' > ', ' 0 ', ' > ', ' 2 '.
4. Press the ENTER button. Play now commences from
Title2.
Note: Depending on the disc used, it may not be possible to
performthese operations during DVD menu play.
For your reference
"INVALID KEY" appears on the TV screen if the number selected
does not exist on the disc.
If an unintentional NUMBER button is pressed, you can
pressthe CLEAR button ortheRETURN button and re-enter
thedesirednumber.
Selecting by Track Number
1. Press the Navigation ( > )button to enter the track digit.
2. Press the Number button(s) to select the preferred track.
Example: To specify track 5, press ' > ', ' 0 ', ' > ', ' 5 '.
3. Press the ENTER button. Play now commences from
track 5.
Dora DTE328_engP13-24.p65 7/27/05, 9:17 AM17

18
Repeat Play
1. Press the REPEAT button once and "REP: [REP 1]" will
appear on the TV screen and the unit will repeat the
selected track / file continuously until the STOP <button
is pressed.
2. Press the REPEAT button twice and "REP: [REP DIR]" will
appear on the TV screen and the unit will repeat the
selected folder continuously until the STOP <button is
pressed.
3. Press the REPEAT button three times and "REP:
[REP ALL]" will appear on the TV screen and the unit
will repeat the whole MP3 disc continuously until the
STOP <button is pressed.
4. Press the REPEAT button again to resume normal
playback.
Repeat viewing
1. Press the REPEAT button during play as follow:
REPEAT x1 = CHAPTER REPEAT
REPEAT x2 = TITLE REPEAT
REPEAT x1 = REPEAT OFF
Notes:
Repeat play works only with discs for which the elapsed
playing time appears during playback.
Repeat play may not work correctly with some DVDs.
Repeat sections between two specific
points (Repeat A - B)
1. PresstheREPEATA -B button duringplay at thepoint where
repeat play is to commence (A).
2. Press the REPEAT A - B button again at the point where
repeat play is to be concluded (B).
Repeat play of the selection between points A and B starts
automatically. The section from point A to point B will play
repeatedly.
To return to normal play
Press the REPEAT A - B button again.
Notes:
Repeat A - B play works only with discs for which the elapsed
playing time appears during playback.
Some subtitles recorded around point A or B may fail to
appear.
RandomPlay
1. Pressthe RANDOMbuttonin Stop mode. Press the ENTER
button to start play in random order.
2. Press the STOP <button to turn Random Play OFF.
Dora DTE328_engP13-24.p65 7/27/05, 9:17 AM18

18 19
ProgramPlay
ProgrammedPlayback (DVD/CD)
This unit has a 16 tracks programmable memory that allows
you to program up to 16 tracks on any disc for playback in
any desired order. You may program 16 different tracks or
you may also program certain tracks to play more than
once Programmed Playback only work for CDs, it does not
work on MP3 CDs.
To perform programmed playback proceed as
follow:
For DVD
1. While in the Stop mode, press the PROGRAM button, the
Program menu will appear on the TV screen.
PROGRAMMING DVD
2. Press the Number button(s) to input 2 numbers for each
program track: one for Title, one for Chapter. After you input
2 numbers, press the ( <,>,Ù,Ú ) Navigation buttons
to move the cursor to the next program space for inputting
other numbers.
3. Repeat step 2 until all desired title & chapter have been
programmed (up to 16). You can repeat a title & chapter
more than once if desired.
4. Press the ( <,>,Ù,Ú ) Navigation buttons to select
"CLEAR" to erase all unwanted programmed tracks
simultaneouslyforreprogramming.
5. Press the ( <,>,Ù,Ú ) Navigation buttons to select "PLAY"
tobeginprogrammed playback.
6. Playback will begin on the first title / chapter that you
programmed and the player will continue to play all of the
tracks that you programmed in the order in which you
programmed them.
For CD
1. Select the track to be programmed by using the Number
button(s) on the Remote Control.
2. Press the ( <,>,Ù,Ú ) Navigation buttons to move the
cursor to the next program space for inputting other track
numbers.
3. Press the ( <,>,Ù,Ú ) Navigation buttons to select
"CLEAR" to erase all unwanted programmed tracks
simultaneouslyforreprogramming.
4. Up to 16 tracks in total can be programmed for CD
programmedplayback.
PROGRAMMING CD
5. Press the ( <,>,Ù,Ú ) Navigation buttons to select "PLAY"
tobeginprogrammed playback.
To cancel the program function
Press the STOP <button twice or press the OPEN/CLOSE
button to cancel the program function.
Changing the Audio Output Signal
Audio CD's
1. Press the AUDIO MODE button repeatedly to choose
between MONO LEFT, MONO RIGHT, LEFT VOCAL,
RIGHTVOCAL and STEREO.
MONO LEFT and MONO RIGHT modes will combine the
original stero signal into one mono signal (use this mode
when playing on a mono TV).
LEFT VOCAL and RIGHT VOCAL modes allow you to output
either the left or right channel of a stereo signal (use
this mode when playing CDs with specific audio recorded
independently in each channel).
These functions work only for discs recorded with these
features.
Dora DTE328_engP13-24.p65 7/27/05, 9:17 AM19