Emerson LC320EM8 User manual

_ _rT_SQm TM
EMERSON ANDTHE G=CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORE. PARSIPPAN_ NEW JERSEY U.S.A
32 inch Digital /Analog
LCDTV
Owner's Manual
LC320EM8
Hi::lml
.......................... I TO RECEIVE DiGITAL/ANALOG SIGNAL,
Dn_
D, e, TAL YOU MUST CONNECT ANTENNA.
© 2007 Funai Electric Co., Ltd.

WARNING:
TO REDUCE THE RiSK OF FiRE OR ELECTRIC SHOCK, DO NOT EXPOSE THiS APPLi-
ANCE TO RAiN OR MOISTURE.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVECOVER (OR BACK).
NO USER SERVICEABLE PARTSINSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The important note is located on the rear of the cabinet.
THIS SYMBOL INDICATES THAT DANGER-
OUS VOLTAGE CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT WITHIN
THIS UNIT.
l,_ THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND MAIN-
TENANCE INSTRUCTIONS IN THE LITERA-
TURE ACCOMPANYING THE APPLIANCE.
1. READ INSTRUCTIONS -All the safety and operating instructions
should be read before the appliance is operated.
2. RETAIN INSTRUCTIONS -The safety and operating instructions
should be retained for future reference.
3. HEED WARNINGS - All warnings on the appliance and in the operat-
ing instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should
be followed.
5. CLEANING - Unplug TV from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and,
that for some specific reason, such as the possibility of the loss of an
authorization code for a CATV converter, is not intended to be
unplugged by the user for cleaning or any other purpose, may exclude
the reference to unplugging the appliance in the cleaning description
otherwise required in item 5.
6. ATTACHMENTS - Do not use attachments not recommended by the
TV manufacturer as they may cause hazards.
7. WATER AND MOISTURE - Do not use this TV near water, for exam-
ple, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, and the like.
8. ACCESSORIES - Do not place this TV on an unstable cart, stand, tri-
pod, bracket, or table. The TV may fall, causing serious injury to some-
one, and serious damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold
with the TV. PORTABLECARTWARNING
Any mounting of the appliance should follow
the manufacturer's instructions and should use
a mounting accessory recommended by the
manufacturer. An appliance and cart combina-
tion should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination to
overturn.
AMEUBLES -Cet appareil ne doit _tre place SYMBOLED'AVERTISSEMENT_OUR
LES COM POSANTES
que sur un meuble (avec ou sans roulettes) APPAREILETMEUBLEAROULE_ES
recommande par le fabricant. Si vous I'in-
stallez sur un meuble & roulettes, deplacez
les deux ensembles avec precaution. Un arr_t
brusque, rutilisation d'une force excessive et
des surfaces irregulieres risquent de desta-
biliser rensemble et de le renverser.
9. VENTILATION - Slots and openings in the
cabinet and the back or bottom are provided for ventilation and to
ensure reliable operation ofthe TV and to protect it from overheating,
these openings must not be blocked or covered. The openings should
never be blocked by placing the TV on a bed, sofa, rug, or other similar
surface. This TV should never be placed near or over a radiator or heat
register. This TV should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufac-
turer's instructions have been adhered to.
10. POWER SOURCES - This TV should be operated only from the type
of power source indicated on the marking label. If you are not sureof
the type of power supply to your home, consult your appliance dealer
or local power company. ForTVs intended to operate from battery
power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION -This TV is equipped with a polar-
ized alternating-current line plug(a plug having one blade wider than
the other). This plug will fit into the power outlet only one way.This is a
safety feature. If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still fail to fit, contact your elec-
trician to replace your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
12. POWER-CORD PROTECTION - Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exitfrom the appli-
ance.
13. OUTDOOR ANTENNA GROUNDING -If an outside antenna or cable
system is connected to the TV, be surethe antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA No.70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. (Fig. A)
FIGURE A....
EXAMPLE OF ANTENNA GROUNDING AS PER /_ ANTENNA
LEAD IN
NATIONAL ELECTRICAL CODE WIRE
GROUND
CLAMP
. ANTENNA
D_SCNARGE UNIT
(NEC SECTION 810-20)
UND_NG CONDUCTORS
[ (NEC SECTION 810-21)
..... .....
NEC. NATIONAL ELECTRICAL CODE -POWER SERVICE GROUNDING
ELECTRODE SYSTEM
$2898A (NEC ART 250 PART H)
14. LIGHTNING - Foradded protection forthis TV receiverduring a lightning
storm, or when itis left unattendedand unused for long periodsof time,
unplug itfrom the wall outlet and disconnectthe antenna or cable system.
This will preventdamage to the TV due to lightning andpower-line surges.
15. POWER LINES -An outside antenna system should not be located in
the vicinity of overhead power lines or other electric lightof power cir-
cuits, or where itcan fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
EN

16. OVERLOADING - Do not overload wall outlets and extension cords as
this can result in a risk of fire or electric shock.
17. OBJECT AND LiQUiD ENTRY - Never push objects of any kind into
this TV through openings as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock. Never spill liq-
uid of any kind an the TV.
18. SERViCiNG - Do not attempt to service this TV yourself as opening or
removing covers may expose you to dangerous voltage or other haz-
ards. Refer all servicing to qualified service personnel,
19. DAMAGEREQUiRiNG SERVICE- Unplugthis TV from the walloutlet and
referservicing to qualifiedservice personnelunder the followingconditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects havefallen into the TV.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the operating instruc-
tions. Adjust only those controls that are covered by the operating
instructions, as improper adjustment of other controls may result in
damage and will often require extensive work by a qualified techni-
cian to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in performance, this indicates
a need for service.
20. REPLACEMENT PARTS-When replacement parts are required,be surethe
servicetechnicianuses replacementparts specifiedby the manufacturerthat
havethe same characteristicsasthe original part.Unauthorizedsubstitutions
may result in fire,electricshock, injuryto personsor otherhazards.
21. SAFETY CHECK - Upon completion of any service or repairs tothis TV,
ask the service technician to perform routine safety checks to determine
that the TV is in proper operating condition.
22. HEAT - This TV product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
,, Place your TV in a room with adequate ventilation.
,, Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
,, Do not place your TV on soft surfaces, such as rugs or blankets.
,, Leave enough room for air to circulate around the bottom, top and back of the set.
IO LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW. I
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly approved in the
owner's manual. The user could lose the authority to operate this equipment if an unauthorized change or
modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil num_rique de la classe Best conforme a la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR EVITER LES CHOCS €:LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground should be
connected to the grounding system of the building as close to the point of cable entry as practical.
The serial number of this product may be found on the back of the TV. No others have the same serial num-
ber as yours. You should record the number and other vital information here and retain this book as a perma-
nent record of your purchase to aid identification in case of theft.
Model No. Date of Purchase
Serial No. Dealer Phone No.
Dealer Purchase from Dealer Address
A NOTE ABOUT RECYCLING:
This product's packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regu-
lations concerning chemical wastes.
09
Z
0
p-
0
w
09
t_
{5
w
u,.
09
p-
Z
0
EN

* Owner's Manual
(1EMN22175) ,, Remote control unit _ ,, Batteries
(NF006UD) I_=1 ("AA" x 2)
• If you need to replace these accessories, please refer to the PART NO. with the illustrations and call our toll free cus-
tomer support line found on the cover of this manual.
• Depending on your antenna system, you may need different types of Combiners (Mixers) or Separator (Splitters). Contact
your local electronics store for these items.
• DTVFI'V/CATV
You can use your remote control to select channels which
are broadcast in conventional analog, standard definition,
and high definition formats. Also, cable subscribers can
access their cable TV channels.
• Program Information Display (DTV only)
You can display the title, contents and other information of
the current DTV program on the screen.
•Autoscan
This TV can automatically scan and memorize the channels
receivable in your residential area. This feature eliminates the
need of a difficult setting procedure.
• V-CHIP
This feature allows you to block children's access to inap-
propriate programs.
• Closed Caption Decoder
This TV contains the built-in Closed Caption Decoder that
displays text across the screen. It allows you to read the
dialogue of a TV program or other information in the Closed
Caption-supported programs.
• MTS/SAP Tuner
This feature allows you to select with the remote control
your desired audio language.
•Auto Shut Off Function
If there is no signal input from the antenna terminal and
no operation for 15 minutes, the unit will turn itself off
automatically.
•Choices for On-Screen Menu Language
Select your setup menu language: English, Spanish or
French.
• Stereo Sound Function
•Full-Function Remote Control
•PLL Frequency Synthesized Tuning
• HDMI Input
This TV accepts 480i /480p /720p /1080i video signals
and 32kHz /44.1kHz /48kHz audio signals.
• Component VIDEO input
This TV accepts 480i /480p /720p /1080i video signals.
• S-VIDEO input
•AV input
•Analog Audio Output
•Digital Audio Output (Coaxial)
Resume
This feature will automatically memorize settings if a
power failure occurs.
© 2007 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded
or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai.
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein
without the obligation to notify any person or organization of such changes.
F'UNAIwith the _ design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the
express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective own-
ers. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to
use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly pro-
hibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN

i ii'! ii iiiiiiiii! ii! !i!iiiiii!iiiiiiiiii ii!
NTENTS
IMPORTANT SAFEGUARDS ............................................................ 2
PRECAUTIONS ...................................................................... 3
SUPPLIED ACCESSORIES ............................................................. 4
FEATURES ......................................................................... 4
FUNCTIONS ............................................................... 6
REMOTE CONTROL, TOP AND REAR PANEL FUNCTION ..................................... 6
INSTALLING THE BATTERIES ........................................................... 7
BATTERY PRECAUTIONS .......................................................... 7
PREPARATION FOR USE ................................................... 8
CONNECTION ....................................................................... 8
ANTENNA CABLE CONNECTION ................................................... 8
CONNECTION TO CABLE/SATELLITE BOX ............................................ 8
CONNECTING OTHER DEVICES ........................................................ 9
HDMI ......................................................................... 9
COMPONENT CABLE CONNECTION ............................................... 10
S-VIDEO CABLE CONNECTION ..................................................... 10
VIDEO CONNECTION ............................................................ 11
DIGITAL AUDIO CONNECTION ...................................................... 11
ANALOG AUDIO CONNECTION .................................................... 11
iNiTiAL SETTINGS ......................................................... 12
INITIAL SETUP ...................................................................... 12
CHANNEL SETTINGS ...................................................... 13
AUTOSCAN ........................................................................ 13
CHANNEL LIST ..................................................................... 14
MANUAL REGISTER ................................................................. 15
ANTENNA CONFIRMATION ............................................................ 16
LANGUAGE SELECTION .............................................................. 17
WATCHING TV ............................................................ 18
CHANNEL SELECTION ............................................................... 18
VOLUME ADJUSTMENT .............................................................. 18
STILL MODE ....................................................................... 19
SELECTING AUDIO CHANNELS ........................................................ 19
ACCESSING EXTERNAL DEVICES ...................................................... 20
CHANGING THE SCREEN DISPLAY MODE ................................................ 21
SCREEN INFORMATION .............................................................. 22
SLEEP TIMER ...................................................................... 23
OPTIONAL SETTINGS ...................................................... 23
SETUP SCREEN .................................................................... 23
PICTURE ADJUSTMENT .............................................................. 24
CLOSED CAPTION ................................................................... 25
DTV CLOSED CAPTION ............................................................... 26
CLOSED CAPTION STYLE ............................................................. 26
V-CHIP ............................................................................ 28
HDMI AUDIO ....................................................................... 31
MISCELLANEOUS ......................................................... 32
TROUBLESHOOTING GUIDE ........................................................... 32
GLOSSARY ........................................................................ 34
MAINTENANCE ..................................................................... 34
SPECiFiCATiONS .......................................................... 35
WARRANTY ....................................................... Back cover
,,=,
p=
00
LU
LL
O
LU
oo
a
==.
o=
SYMBOLS USED IN THIS MANUAL
The following is the description for the symbols used in this manual.
:Analog TV operation.
: Digital TV operation.
*If neither symbol appears under the function heading, operation is applicable to both.
EN

iii ! !i iij jii!i!!ii iii,iiiii,!iiiiiiiiii ii ii iliiiiiiiiiiiii!ili!ili!ii
E NCTIONS
SLEEP button (p23)
Press to activate the sleeptimer.
POWER button (p12)
Press to turn the TV on and off.
Number buttons (p18)
Press to select a channel.
SETUP button (p23)
Press to display on-screen menu.
_1/ _ /A / _ buttons (p12)
To move left /right /up /down through
the items.
ENTER button (p12)
Press to confirm your selection.
BACK button (p22)
Presstoreturntopreviousmenuoperation.
VOL. AJV buttons (p18)
Pressto adjust volume.
MUTE button (p18)
Press to turn sound on and off.
CH RETURN button (p18)
Presstoreturntopreviouslyviewedchannel.
SELECT button (p20)
Press to access connected external
devices like a DVD recorder or VCR.
button (p19)
,,Analog mode (TV)
Selects audio mode.
,,Digital mode (DTV)
Selects audio language.
- STILL button (p19)
Press to pause screen image.
SCREEN MODE button (p21)
Press to select screen aspect ratio.
button
,,Analog mode (TV) (p22)
To display channel No., signal type
and TV setting.
,,Digital mode (DTV) (p22)
To display channel information, signal
type and TV setting.
,,External input mode (p20)
To display external input mode, signal
type and TV setting.
_JT buttons (p18/p20)
To select channels and external input
mode.
SETUP button (p23)
To display on-screen menu.
VOLUME A/V buttons (p18)
To adjust volume and move right(A)/left(V) through the
menu items.
CHANNEL _JT buttons (p18)
To select channels and move up/down through the menu
items.
POWER button (p12)
Toturn TV on/off.
iNPUT SELECT/ENTER button (p20/p12)
, To access connected external devices like a DVD
recorder or VCR.
, To decide the command of setting when the menu is
displayed.
infrared Sensor Window
Receives infrared rays transmitted from the remote
control.
EN
NOTE:
* With buttons [VOL, _./v] or[MUTEI, you can only adjust the volume of the main anit. Yoa cannot adjast the volume of the
external devices with these buttons.

ANT. IN jack
Coaxial cable connection for
your antenna or cable box.
DIGITAL AUDIO OUT
(COAXIAL) jack
Digital audio coaxial cable
connection for decoder or
audio receiver. Connect cable
to DIGITAL AUDIO IN jack of
external device.
AUDIO OUT jacks
Audio cable connection for external
audio equipment. Use AUDIO IN jacks
of external equipment.
AUDIO jacks (for DVl connection)
Audio cable connection for external
audio/video devices with DVI jack.
Use AUDIO OUT jacks of external
equipment when using an HDMI-DVI
conversion cable.
HDMI iN jack
Rearof thisTV HDMI cable connection
for external video
_ Ir_ n ¢n _1 Iequipment( i.e.DvD
IIII .... IIII, :EtD ,IIII----- 1II I recorder).
9m1/_I_96
COMPONENT1 and
AUDIO jacks
Component cable
connection for external
audio/video devices. Use
component and audio out
jacks of external device.
COMPONENT2 and
AUDIO jacks
Component cable
connection for external
audio/video devices. Use
component and audio out
jacks of external device.
VIDEO2 and AUDIO jacks
Video and audio cable
connection for external
equipment.
from underneath jack
S-Video cable and audio
(VIDE01) cable connection for
external video equipment.
jack
S-Video cable and audio
(VIDE02) cable connection for
external video equipment.
VIDEO1 and AUDIO jacks
Video and audio cable
connection for external
equipment.
09
Z
O
p=
O
Z
LL
Install two AA batteries (included) matching the polarity (++ /- -) indicated inside battery compartment of
the remote control.
[BATTERY PRECAUTIONS]
,,Be sure to follow the correct polarity as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
,,Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh
ones.
,,If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
,,Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
EN

This section describes how to connect your TV to an antenna, cable box, etc.
NOTE: ]
* Be sure your antenna or other source is connected properly before plugging in the power cord.
[ANTENNA CABLE CONNECTION]
1) When connecting your TV to an antenna
Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV.
2) When connecting TV to cable TV company (without box)
Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV.
v.FJ: iiT7
antenna _ "
Cable TV
company
Coaxial cable
(not included)
Rear of this TV
*Once connections are completed, turn on the TV and begin initial setup.
Channel scanning is necessary for the TV to memorize all available channels in your area.
(Refer to "INITIAL SETUP" on page 12.)
NOTES:
* For your safety and to avoid damage to equipment, please unplug the coaxial cable from the ANTtN jack before moving the unit.
ff you use an antenna in order to receive analog TV, the same antenna generally will work for DTV reception.
Outdoor or attic antennas will be more effective than set-top versions.
* To easily switch between antenna and cable wires, you can purchase an "Antenna Selector"commercially available.
* If you connect a cable system directly, contact the CATV installer.
[CONNECTION TO CABLE/SATELLITE BOX]
1) Connect the coaxial cable on your home outlet to the input jack of the CABLE/SATELLITE box.
2) Use another coaxial cable to connect the ANT. IN jack of your TV to the output jack of the CABLE/SATEL-
LITE box.
*Required cables in 2) and connecting methods differ depending on the CABLE/SATELLITE box. For more informa-
tion, please contact your cable/satellite provider.
Ex.
(notincluded)
company
Cable box or
Satellite box
Rearof thisTV
[ }
EN

[HDMI]
1) High Definition Multimedia Interface (HDMI) uses the latest technology to ensure the signal maintains the
highest degree of integrity from source to TV. Both video and audio travel through a single cable.
HDMI cable (notincluded)
Ex,
:........................; I ]
DVD Player with the HDMI output jack
]
To HDMI output jack
Rear of this TV
NOTES:
* This TV accepts 480i/480p/720p/1080i video signals, and 32kHz/44. l kHz/48kHz audio signals.
This TV accepts only 2 channel audio signal (LPCM).
You need to select "PCM" for the digital audio output of the device you connect or the HDMt audio setting. Audio sometimes makes
no sound if you select "Bitstream", etc.
This TV only accepts signals corresponding ETA861.
d)
t_
0
0
t_
t_
2) When your video device has a DVl output jack, connect the HDMI conversion cable (not included) from the
DVl output jack.
HDMI-DVIconversion cable (notincluded)
To DVI output jack
[iil
Cable Box or Satellite Box
with the DVl output jack
To AUDIO Rear of thisTV
input jacks
Audio cable (notincluded)
NOTES:
* This TV accepts 480i/480p/720p/1080i video signals.
* An HDMt conversion cable requires a separate audio cable connection as welL
Audio signals are converted from digital to analog if you make the connection ti_paragraph 2) above.
DVt does not show image if the 480i does not accept EtA/CEA-861/861B.
EN

[COMPONENT CABLE CONNECTION]
Offers better picture quality for video devices connected to your TV.
Use a component video cable (not included) to connect your TV to external video devices equipped with
component video jacks.
If you connect to your TV's COMPONENT1 input jack, connect audio cables to the AUDIO L/R jacks of COM-
PONENT1.
If you connect to your TV's COMPONENT2 input jack, connect audio cables to the AUDIO L/R jacks of COM-
PONENT2.
Component video cable (notincluded)
Ex, I
f..........................................................I
DVD Playerwith the component
video output jacks
Audio cable
To AUDIO Rear of this TV
input jacks
NOTE:
* This TV accepts 480i / 480p / 720p / 1080i video signals.
[S-VIDEO CABLE CONNECTION]
Offers good picture quality for video devices connected to your TV.
Use an S-video cable (not included) to connect your TV to external video devices equipped with S-video con-
nectors.
If you connect to your TV's S-VIDEO1 input jack, connect audio cables to the AUDIO L/R jacks of VIDEO1.
If you connect to your TV's S-VIDEO2 input jack, connect audio cables to the AUDIO L/R jacks of VIDEO2.
[ Exc_I_ _ o........................................
DVDNCR with
the S-Video output jack
To S-Video
output jack
OUT OUT
L
S-video cable (notincluded) To S-VIDEO1 input jack
Audio cable (notincluded} TOAUDIO Rear of thisTV
input jacks
NOTE:
* tf yoa connect to the S-VIDEO jack and the VIDEO jack at the same time, the S-video connection will have prioriOx
EN

[VIDEO CONNECTION]
Offers standard picture quality for video devices connected to your TV.
When the audio jack of the video device is monaural, connect the audio cable to the audio L input jack.
Ex.
Camcorder
To video
' Video cable (notincluded) To VIDEO1
input jack
Audio cable (notincluded) To AUDIO Rear of thisTV
input jacks
[DIGITAL AUDIO CONNECTION]
If you connect this TV to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital
broadcasting sound. Required digital audio coaxial cable not included.
Ex.
MDdeck, DATdeck, etc.
Dolby Digital decoder
Digital audio coaxial cable
(not included) To DIGITAL AUDIO
OUT jack
To coaxial digital
audio input jack
Rear of this TV
iJJ
_0
O
LL
z
O
w
t_
[ANALOG AUDIO CONNECTION]
If you connect this TV to an external analog audio device, you can enjoy stereophonic (2 channel) audio
sound. Required audio cable not included.
Ex, Stereo system
Toaudio inputjacks
AUDIO
R IN L
(not included)
iiiiiiiiiiiiii ,i' @!i ii
_--_JDiO Rearof thisT_V
OUTjacks
EN

!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
i ,ALSETT,.GS
This section will guide you through your TV's initial
set up which includes selecting a language for your
on-screen menu and AUTOSCAN, which automati-
cally scans and memorizes viewable channels.
POWER _,_ _ili!_i!ii:!
@ _!i ,:ii;_¸
1 After making all the necessary connections, turn
on your TV.
2Press [POWER]. Initial Setup menu will appear.
,,This operation may take a few moments.
,,If Initial Setup menu does not appear, press
and hold [ENTER] for 3 seconds, initial setup
will appear then proceed to step 3. If initial set
up has already been completed, refer to
"LANGUAGE SELECTION" on page 17.
3When you first turn on your TV, the following
screen is displayed. Use [A/T] to select the
on-screen menu language from the choices on
the right side of the screen.
The Antenna Confirmation menu on step 4 will
be displayed in the selected language after you
press [ENTER].
4Select source of ANT. IN jack using [A/T], then
press [ENTER].
5Autoscan will start automatically.
,,When scanning has completed, the lowest
memorized channel will be displayed.
NOTES:
*The initial Autoscan function can be executed for either "Air"
or "Cable" only once. When you change the connection
(Air/Cable), set the "Autoscan" again. (Refer to page 13.)
. If you connect a cable system directly, contact the
CA TV installer,
.Wizen the scanning is not complete, Helpful Hint will be
displayed every time you turn on the powe_ tf you have
previously registered channels when this screen appears
you can select a channel with [the Number buttons].
, Toll free customer support line can be found on the cover
of this manual.
EN

SETTINGS
With AUTOSCAN, your TV automatically scans and
memorizes your area's viewable channels. Activate
AUTOSCAN when you turn on your TV for the first
time, change broadcast sources (e.g. from antenna
to CATV), or move your TV to a different broadcast
area.
NOTE:
.Make sure tbe TV is connected to antenna or cable.
1 Display the setup screen.
* Press [SETUP].
The following setup screen appears.
3For TV channels, using [h,/T], select "Air".
For CATV channels, select "Cable".
,, Press [ENTER].
Scanning and memorizing the channels auto-
matically starts.
,,When the scanning and memorizing are com-
pleted, the lowest memorized channel in the
broadcasting will be displayed.
NOTES:
,If you connect a cable system directly, contact the
CATV installer.
,If you press [POWER] or [SETUP] during Autoscan, this
setting will be canceled.
, if there is no reception connected or a poor signal is detect-
ed, a Hint will appear on screen once scanning stops.
09
(5
p-
p-
W
CI)
..J
uJ
.T.
o
69
(5
p-
p-
uJ
,I
C-
2Select "CHANNEl" and press [ENTER] to con-
firm.
* Using [A/T], select "Autoscan".
* Press [ENTER].
EN

This function lets you remove undesired channels
from the Channel Registration List.
SETUP
1 Display the setup screen.
,,Press [SETUP].
The following setup screen appears.
3Select the channel you want to remove.
,, Using [A/T], select the channel.
,, Press [ENTER] to highlight the channel select-
ed for removal. You will not be able to select the
channel again using [CH A/T].
,,To reactivate the removed channel, highlight it
and press [ENTER].
,,When you remove a major channel, you
remove its minor channels, too.
NOTE:
.The channel with "DTV"indica ted on the display is ATSC,
otherwise the channel is NTSC.
4To exit the setup, press [SETUP].
2Select "CHANNEL' and press [ENTER] to con-
firm.
,,Using [A/T], select "Channel List".
,,Press [ENTER].
EN

This function lets you manually add channels not
memorized due to poor broadcast strength during
AUTOSCAN.
++e+ ++
+ee e+
+ + O ++++
0 @
SETUP +
1 Display the setup screen.
+Press [SETUP].
The following setup screen appears.
3Select the channel you want to add.
,,Using [the Number buttons], select your
desired channel.
+,Select "Register" with [ENTER].
4To exit the setup, press [SETUP].
NOTES:
.tf set up completes successfully, "Registered to the Channel
List" is displayed.
.tf Video 1is being used, set up will not be completed suc-
cessfally and "Unavailable" will be displayed on the screen.
69
(5
Z
p..
p..
UJ
=.
o
2Select "CHANNEl" and press [ENTER] to con-
firm.
,, Using [A/'_'], select "Manual Register".
,, Press [ENTER].
EN

Displays signal strength for each channel.
_OO O
io o oi
i@ @
io e....
1 Display the setup screen.
• Press [SETUP].
The following setup screen appears.
• If the channel is set to external input, you can-
not confirm the antenna situation.
3To exit the setup, press [SETUP].
2Select "CHANNEl" and press [ENTER] to con-
firm.
,,Using [A/T], select "Antenna".
, Press [ENTER].
, Using [the Number buttons] or [CH A/_'],
select the channel for which you want to check
signal strength.
EN

You can choose English, Spanish, or French as
your on screen language.
i
setup
1 Display the setup screen.
* Press [SETUP].
The following setup screen appears.
69
_5
p..
p-
w
,,,,J
uJ
,.r
o
2Select "LANGUAGE" and press [ENTER] to con-
firm.
*Using [A/V], select "English", "EspaRor' or
"Fran(_ais".
,, Press [ENTER].
3To exit the setup, press [SETUP].
EN

TV
Select channels by pressing [CH A/'V] found on
remote control or on the TV's control panel, or by
pressing [the Number buttons] found on the remote
control.
'C;;_ ,' ,,_....C__
@ @ @
@ @ @
e e
[CH A/T]
,,Use [CH A/T] to change the channel.
,,Same operation is also available with [CHAN-
NEL A/T] on the top panel of the main unit.
[the Number buttons]
,,Press the channel number with [the Number
buttons] to select a channel you want to watch,
then press [ENTER].
-When selecting analog channel 12
O-,O-,O
-When selecting digital channel 12-1
Be sure to press [-] before entering the minor
channel number.
,,If the channel broadcasts NTSC and ATSC both
and you don't press [-], you will receive the
NTSC channel only. The moment you press [-],
the lowest memorized digital channel will be dis-
played.
,,Press [CH RETURN] to return to the previously
viewed channel.
NOTE:
.tn DTV broadcasting, one cbannel sometimes broadcasts
multiple programs depending on the air time. tn this case,
the main channel is called major channel and the minor
channel is called mll_or channel
About minor channel broadcasting:
There may be different programs being broad-
cast on minor channels through a single chan-
nel from ATSC. You can watch each minor
channel program being broadcast by selecting
one of the minor channels.
NTSC ATSC
18:00
18:30
19:00
19:30
20:00
: change automatically
=> : change manually by pressing [CHA/v]
on your remote control
NOTE:
, "No Signal" will appear on the screen after the minor
channel broadcast is oveg
You will need to change the channel to continue
watching another TV program.
This section describes how to adjust the volume.
The mute function, which turns the sound off and
on, will also be described.
[VOL. A/_]
,, Use [VOL z_7] to adjust the audio volume.
,,The same operation is available with [VOLUME
AP] on the top panel of the main unit.
,,The volume bar will be displayed at the bottom
of the screen when adjusting the volume.
,,The volume bar display will automatically dis-
appear in a few seconds.
[MUTE]
,, Press [MUTE] to turn off and on the sound.
,,"Mute" is displayed on the screen for a few sec-
onds.
,, Press [MUTE] again or [VOL A..'V] ([VOLUME
AFT]) to release the Mute status.
EN

You can freeze the image shown on the screen.
Cilf: i !,: iiiiiiiiiiiiiiiiiiiiiiiiiiiiilb i!!D
1 Pause the image.
,,When you press [STILL], the image shown on
the screen is paused.
,,The audio is not paused and keeps on reading
out.
,, If the digital signal is gone or protected, the
image will remain paused and the audio will be
muted.
,,The Still function will be released after 5
minutes.
2Canceling Still function.
,,The Still function will be canceled by pressing
any button while Still function is working.
NOTE:
* Press any key except [POWER] to cancel still mode.
This section describes how to switch the audio in
the analog mode and how to switch the audio lan-
guage in the digital mode.
When you press [AUDIO], the currently selected
audio mode will be displyed on the screen.
When the broadcasting has all audio...
When the broadcasting has stereo audio and
monaural audio...
When the broadcasting has SAP and monaural
audio...
When the broadcasting is having only monaural
audio...
(cannot be switched.)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
When you press [AUDIO], the currently selected
language and the number of available languages
will be displayed on the screen.
Press [AUDIO] to cycle through available audio
languages.
,,Available languages differ depending on the
broadcast.
,,The information display will automatically dis-
appear in one minute.
NOTE:
*Pressing [AUDIO] does not control external audio source.
>
t-
z
,1-
o
}
Press [AUDIO] to cycle through available audio
channels.
EN

Use your remote control to access DVD recorders,
home audio systems and other external devices
when they are connected to your television.
_NPUT
,_:_,!_'!_ _ _ SELECT
• When you press [INFO], the current external
input mode, the type of resolutions for video
signal, TV aspect ratio, CC and TV rating will
be displayed at the top-right of the screen.
,,The information display will automatically dis-
appear in 1 minute.
1) When using VIDEO1 or S-VIDEO1 input jack
2) When using VIDEO2 or SWIDEO2 input jack
Use your remote control to select external com-
ponent.
,,When you press [INPUT SELECT] or [CH _]
on the remote control, the input mode will be
switched as below.
TV/DTV channel
I
I
.._._._J
,,Pressing [CH _ on the remote control reverses
direction.
,,To use the VIDEO1 or S-VIDEO1 input jack on
the TV, select "Video1".
,,To use the VIDEO2 or SWIDEO2 input jack on
the TV, select "Video2".
,,To use the COMPONENT1 input jacks on the
TV, select "Component1 ".
,,To use the COMPONENT2 input jacks on the
TV, select "Component2".
• To use the HDMI IN jack on the TV,
select "HDMr'.
EN
3) When using COMPONENT1 input jacks
4) When using COMPONENT2 input jacks
5) When using HDMI IN jack