Emerson Liebert Vertiv RDU-SIC G2 User manual

Contents
Chapter 1 Product Description............................................................................................................................................1
1.1 Components Description.......................................................................................................................................1
1.2 Main Functions......................................................................................................................................................2
1.3 Technical Specifications .......................................................................................................................................3
1.3.1 Environment Specifications .......................................................................................................................3
1.3.2 Performance Specifications.......................................................................................................................3
Chapter 2 Hardware Installation..........................................................................................................................................4
2.1 Installation Preparation.........................................................................................................................................4
2.1.1 Notes.........................................................................................................................................................4
2.1.2 Ambient Requirements..............................................................................................................................5
2.2 Installing RDU-SIC G2 Card.................................................................................................................................5
Chapter 3 Web Page Of RDU-SIC G2 ................................................................................................................................6
3.1 Login Preparation..................................................................................................................................................6
3.1.1 Checking IP Address Connectivity.............................................................................................................6
3.1.2 Checking Browser Version ........................................................................................................................6
3.1.3 Checking Browser Setting .........................................................................................................................6
3.2 Log In RDU-SIC G2............................................................................................................................................10
3.2.1 Login Page ..............................................................................................................................................10
3.2.2 Forgetting Password................................................................................................................................10
3.3 Homepage Of RDU-SIC G2................................................................................................................................11
3.3.1 Time Calibrating Link...............................................................................................................................12
3.3.2 Clearing Time-Out...................................................................................................................................12
3.3.3 Logout......................................................................................................................................................12
3.3.4 Real-Time Alarm Pop-Up Setting ............................................................................................................12
3.4 Menu Items.........................................................................................................................................................12
3.4.1 Device Information...................................................................................................................................13
3.4.2 Safe Shutdown........................................................................................................................................14
3.4.3 Alarm Management .................................................................................................................................16
3.4.4 Data & History .........................................................................................................................................19
3.4.5 Device Options........................................................................................................................................21
3.4.6 System Options.......................................................................................................................................26
3.4.7 Help.........................................................................................................................................................33
Chapter 4 Maintenance.....................................................................................................................................................35
4.1 Restoring Default Setting....................................................................................................................................35
4.2 FAQ ....................................................................................................................................................................35
Appendix 1 Glossary.........................................................................................................................................................37
Appendix 2 Standard Configuration List............................................................................................................................38

Chapter 1 Product Description 1
RDU-SIC G2 Card User Manual
Chapter 1 Product Description
The RDU-SIC G2 card is a network management card. It can make the intelligent equipment (such as UPS, PDU, air
conditioner and so on) developed by Vertiv have the capacity of network communication. The RDU-SIC G2 card can
also connect to the environment monitoring equipment, including IRM series temperature & humidity sensor or dry
contact signal input & detecting sensors. In case of an equipment alarm, it notifies the user by multiple ways: recording,
sending a Trap message, sending an E-Mail or sending an SMS.
The RDU-SIC G2 card can meet the requirements of TCP/IP, RS232/485 networking modes and can be flexibly
configured according to various application conditions.
This chapter expounds the components description, main functions and technical specification.
1.1 Components Description
The appearance and ports of the RDU-SIC G2 card are shown in Figure 1-1.
Figure 1-1 Appearance and ports of RDU-SIC G2 card
Console port
The RDU-SIC G2 card supplies a console port (USB port, see Figure 1-1 for its position), which adopts USB
communication mode. Short pin 2 and pin 3 of jumper J20. The communication parameters are given in Table 1-1.
Table 1-1 Communication parameters of console port
Parameter
Baud rate
Bit
Parity
Stop bit
Value
115200bps
8 bits
None
1 bit
USB port
The RDU-SIC G2 card supplies one USB-A type socket port for connecting USB Modem of designated model. Short
pin 1 and pin 2 of jumper J20. Its position is shown in Figure 1-1.
Ethernet port
1)
RDU-M
2)
SMTP
3)
NSM management system
4)
Web browser
RS485 port
1)
PDU
2) Air conditioner
3)
UPS
4)
IRM sensor
USB port
1)
Connecting USB Modem
2) Equipment console port
RS485 port
1)
PDU
2) Air conditioner
3)
UPS
RS485/RS232 port
1)
PDU
2) Air conditioner
3)
UPS

2 Chapter 1 Product Description
RDU-SIC G2 Card User Manual
Network port
The RDU-SIC G2 card provides one network port which adopts 10/100M Base-T self-adaptable Ethernet port. Its
position is shown in Figure 1-1. See Table 1-2 for default configuration of the network port.
Table 1-2 Default configuration parameters of the network port
Parameter
Network card
IP address
Subnet mask
Default gateway
Default parameter
192.168.0.252
255.255.255.0
192.168.0.1
COM port
The RDU-SIC G2 card supplies three independent COM ports. Their positions are shown in Figure 1-1.
The port adopts RS-485 communication mode; the gold finger adopts RS-485/232C (adaptive) communication mode.
See Table 1-3 for the communication parameters.
Table 1-3 Communication parameters of COM port
Parameter
Baud rate
Bit
Parity
Stop bit
Value
1200bps, 2400bps,
4800bps, 9600bps,
19200bps (optional)
5 ~ 8 bits
Even/Odd/None/Mark/Space
1 ~ 2 bits
Note: The combination mode of 5-bit word size and 2-bit stop bit is not supported
1.2 Main Functions
The main functions of RDU-SIC G2 card are listed in Table 1-4.
Table 1-4 Main functions of RDU-SIC G2
Main function
Description
Device monitoring
Realizing camera viewing in data center; getting and handling the data of different intelligent devices and
controlling them through Web interface
Safe shutdown
Shutdown
schedule
Configure the maintenance policy of the UPS, and can periodically reboot or close the
supervised UPS
Sever shutdown
Used together with the NetworkShutdown software. When the UPS has certain critical
alarm, the system will notify the server shutdown to avoid the sever going down
Alarm
Management
Current alarm
Displaying alarm in real time, and confirming the current alarm
History alarm
Querying the history alarm
Alarm notification
1. Can be customized according to user requirements, that is, alarm notification
content can be customized;
2. You can choose the communication mode to receive alarm information of different
level from different equipment;
3. The communication mode includes Email, SMS and phone;
4. Email supports SSL function;
5. Supplying alarm test function to test whether or not users have received the alarm
notification information;
6. Sending the system running status periodically according to user configuration
Data & History
Device information
Querying the main data of equipment
History data
Querying the history data
History log
Querying the log data
Clear history
Clearing the history data and log data
Device Options
Device
management
1. Can add, modify and delete equipment actively, and support adding four pieces of
intelligent equipment at most;
2. Can install and uninstall equipment type and support connecting third party
equipment
Note: The default installed equipment cannot be deleted and modified
Signal setting
Modifying equipment name and alarm level online
Batch
configuration
Updating and downloading configuration files and system files

Chapter 1 Product Description 3
RDU-SIC G2 Card User Manual
Main function
Description
System Options
Monitoring unit
Collecting the system information of RDU-SIC G2
Network setting
1. Setting the network information such as IP, subnet mask, gateway and DNS;
2. Controlling whether the upper monitoring system (RDU-M manager) can visit the
RDU-SIC G2;
3. Remote service setting
User management
Adding, modifying and deleting user information
Date/time setting
Calibrating the real time clock of RDU-SIC G2
Restore system
Rebooting the RDU-SIC G2 and restoring default configuration
Site setting
Modifying site information online
System upgrade
Upgrading the application program online
System title
Setting title and logo picture at the top of the Web page
Help
About RDU-SIC
G2
Displaying serial number, identify code and software version, and supplying links for
downloading user manual and tool software
1.3 Technical Specifications
1.3.1 Environment Specifications
See Table 1-5 for the environment specifications of RDU-SIC G2.
Table 1-5 Environment conditions
Item
Requirement
Application location
Usually in data center or computer room, with air conditioner
Working temperature
-10ºC ~ +60ºC
Relative humidity
5%RH ~ 95%RH, no condensing
Working environment
Dust: compliant with the indoor requirements of GR-63. No corrosive gas, flammable gas, oily
mist, steam, water drops or salt
Air pressure
70kpa ~ 106kpa
Storage temperature
-40ºC ~ +70ºC
Cooling
Natural cooling
Power distribution network
TT/TN
Protection level
IP20
1.3.2 Performance Specifications
See Table 1-6 for the performance specifications of RDU-SIC G2.
Table 1-6 Performance specifications
Connected component
Cable standard
Connected distance
(unit: m)
Connected number /
connection point
Connecting nodes of COM ports
Standard category 4 twisted-pair cable
≤ 100
Three Intelligent devices
8 test points[1] of Sensor
Note:
[1]: The RDU-SIC G2 can connect intelligent devices through COM1 or COM2. The connected devices of single COM cascade
cannot exceed two

4 Chapter 2 Hardware Installation
RDU-SIC G2 Card User Manual
Chapter 2 Hardware Installation
This chapter expounds the hardware installation of the RDU-SIC G2.
2.1 Installation Preparation
2.1.1 Notes
When installing RDU-SIC G2, take the following precautions to avoid personnel injury and device damage by accident.
Always cut off the power before performing any installation operation on the RDU-SIC G2
Ensure that the external devices are connected to the correct ports of the RDU-SIC G2
Wear an ESD-proof glove during installation
Arrange the wires properly, and do not put any heavy objects on the wires or stamp the wires
The jumper locations of the RDU-SIC G2 card are shown in Figure 2-1.
Jumper J18
Jumper J20
Figure 2-1 Jumper locations of the RDU-SIC G2 card
Make sure that the jumpers of RDU-SIC G2 card are set to correct position. See Table 2-1 for the jumper setting of the
RDU-SIC G2 card.
Table 2-1 Jumper setting of the RDU-SIC G2 card
Working mode
Jumper setting
Description
Maintenance mode
J20J18
The USB port is used to login the RDU-SIC G2 card through Hyper
Terminal (TTY)
Normal mode
J20J18
The USB port is used to connect to the SMS Modem
Reset mode
J18
When you forget the password of ‘rduadmin’, password of Web
system administrator ‘admin’and IP address, set the jumpers
according to this mode, reboot the RDU-SIC G2 card, and wait more
than 20s to recover the above three parameters to be default values.
After successful resetting, you must set the jumpers according to the
normal mode to avoid resetting the user setting again after rebooting
the RDU-SIC G2 card

Chapter 2 Hardware Installation 5
RDU-SIC G2 Card User Manual
The jumper setting of the RDU-SIC G2 card is normal mode by default.
2.1.2 Ambient Requirements
Operation environment
The RDU-SIC G2 must be installed indoor. Refer to Table 1-5 for specific requirement.
ESD-proof
To make the static electricity reduce to zero, you must take measures as follows:
Keep proper temperature and humidity in the data center (see Table 1-5).
Wear the ESD-proof gloves and work clothes before contacting with the PCB. If there are not ESD-proof gloves
and work clothes, wash hands with water and dry them.
Immunity
Take the following measures for immunity:
Keep the working ground of RDU-SIC G2 away from earthing device of electricity device or SPD earthing device
Keep away from the radio-transmitting station, radar transmitter and high-frequency large-current device
Use the electromagnetic shielding method if necessary
2.2 Installing RDU-SIC G2 Card
1. Set the jumpers of the RDU-SIC G2 card according to Table 2-1.
2. Insert the RDU-SIC G2 card into position along the guide grooves on both sides of the intellislot intelligent slot, and
tighten the screws.
3. Open the power device. At this point, if the RUN indicator (yellow) of the RDU-SIC G2 card turns on, it indicates that
the RDU-SIC G2 card is starting up.

6 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
Chapter 3 Web Page Of RDU-SIC G2
This chapter introduces how to log in the RDU-SIC G2 through Web browser and relevant functions of the RDU-SIC
G2.
3.1 Login Preparation
To ensure that the RDU-SIC G2 page function can be normally used, please refer to this section for selecting and
setting browser options.
3.1.1 Checking IP Address Connectivity
Before logging in RDU-SIC G2 through Web, please first confirm the IP address of RDU-SIC G2, and test its
connectivity. Refer to Q5 in 4.2 FAQ for the test method.
3.1.2 Checking Browser Version
For the best user experience, the recommended browser is Internet Explorer, its version includes: IE8, IE9, IE10 or
IE11; you can also use other pop web browsers, such as Chrome, Firefox.
3.1.3 Checking Browser Setting
Checking IE General setting
Double-click the icon of IE to run the software, click the menus of Tools -> Internet Options, then click the Settings
button on the General tab, and select Every time I visit the webpage for Check for newer versions of stored
pages, as shown in Figure 3-1.
Figure 3-1 General setting
Checking IE proxy setting
1. Double-click the icon of IE to run the software, click the menus of Tools -> Internet Options and then choose the
Connections tab to pop up the window shown in Figure 3-2.

Chapter 3 Web Page Of RDU-SIC G2 7
RDU-SIC G2 Card User Manual
Figure 3-2 Choosing the Connections tab
2. In the window shown in Figure 3-2, click the button LAN Settings to pop up the window shown in Figure 3-3.
Figure 3-3 LAN setting
3. Consult the network manager of your area, ask if you need to set a proxy server and get the configuration method. If
there is no need to set a proxy server, do not tick any option.
Checking IE security setting
1. Double-click the icon of IE to run the software, click the menus of Tools -> Internet Options and then choose the
Security tab to pop up the window shown in Figure 3-4.

8 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
Figure 3-4 Security setting 1
2. In the window shown in Figure 3-4, choose Local intranet and click the Custom level button to pop up the window
shown in Figure 3-5.
Figure 3-5 Security setting 2
3. In the window shown in Figure 3-5, set ‘Medium-low’for the security level. Click the Reset button to finish Reset
custom settings, at last, click OK.
4. In the window shown in Figure 3-6, set Enable for File download.

Chapter 3 Web Page Of RDU-SIC G2 9
RDU-SIC G2 Card User Manual
Figure 3-6 Enabling file download
5. In the window shown in Figure 3-7, set Enable for Initialize and script ActiveX controls not marked as safe for
scripting.
Figure 3-7 Enabling ActiveX controls
6. In the window shown in Figure 3-8, add the IP address of the RDU-SIC G2 into the trusted site list.

10 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
Figure 3-8 Adding trusted sites
3.2 Log In RDU-SIC G2
3.2.1 Login Page
1. Open the IE browser, and enter the IP address of the RDU-SIC G2 in the address box, the login page will appear, as
shown in Figure 3-9. If the login page does not appear, refer to Q5 in 4.2 FAQ.
Crystal blue Ocean blue
Figure 3-9 Login page of RDU-SIC G2
2. On the login page, select a preferable theme by clicking or : means crystal blue; means ocean blue,
as shown in Figure 3-9.
3. Type the username and password (default username: ‘admin’, default password: ‘Vertiv’), and click the Login
button, the homepage will appear, as shown in Figure 3-11.
3.2.2 Forgetting Password
If you forget the password, click the Forget Password button on the login page, and the screen will display the page
of getting password, as shown in Figure 3-10.

Chapter 3 Web Page Of RDU-SIC G2 11
RDU-SIC G2 Card User Manual
Figure 3-10 Page of getting password
Type your username, and click the Submit button, your password will be sent to the email box or phone which you
have configured before. Clicking the Return button cancels the operation.
Note
1. Only when you have correctly configured the email and SMS parameters on the SMS and Email Server Configuration page
can you receive the password sent by the system. Refer to Alarm Notification in 3.4.3 Alarm Management for detailed setting
method.
2. The gotten password is a random new password generated by the system; please modify the password after logging in the
system successfully.
3.3 Homepage Of RDU-SIC G2
After successful login, the homepage of RDU-SIC G2 is displayed by default, as shown in Figure 3-11.
1
2 34 5
6
8
10 9
7
1. Menu item
2. Controllable status
3. Current number of every level alarm
4. System title
5. Logo
6. [User] Logout
7. Function display area
8. Real-time alarm displaying list
9. Alarm pop-out setting
10. Time calibrating link
Figure 3-11 Homepage of RDU-SIC G2

12 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
3.3.1 Time Calibrating Link
The lower left part displays the system time of RDU-SIC G2. Clicking the RDU-SIC G2 time will jump to the time
calibrating page. For detailed operation, refer to Date/Time Setting in 3.4.6 System Options.
3.3.2 Clearing Time-Out
When there is no operation on the page within 15min, the page will become uncontrollable, as shown in Figure 3-12.
Figure 3-12 Controllable status
Click [Clear] Time-out, the input box shown in Figure 3-13 will appear. After typing the password, the controllable
status will become normal after about 5s.
Figure 3-13 Password verification
3.3.3 Logout
Click the Logout at the upper right corner of the homepage, the prompt box shown in Figure 3-14 will appear, clicking
OK will log out safely.
Figure 3-14 Logout
3.3.4 Real-Time Alarm Pop-Up Setting
The real-time alarm displaying list is contracted on the bottom of the page by default. You can perform the following
operation by referring to Figure 3-11:
1. Click Display Current Alarms manually, and the real-time alarm displaying list will pop up;
2. Tick Auto Pop-out, and the real-time alarm displaying list will pop up when an alarm is generated;
3. Tick Alarm Sounds, and the system will play alarm sound through the browser when an alarm is generated.
3.4 Menu Items
On the homepage of RDU-SIC G2, the menu items include Device Info, Safe Shutdown, Alarm Management,
Data&History, Device Options, System Options and Help.

Chapter 3 Web Page Of RDU-SIC G2 13
RDU-SIC G2 Card User Manual
3.4.1 Device Information
Click the Device Info menu in the left, the submenus will appear. When you click the specific device, the right part will
display the relative information of the device, including Sampling, Control, Setting and Alarm.
Note
ENV in Device Info is a dummy device, which indicates all temperature sensors and temperature & humidity sensors connected
to RDU-SIC G2.
Sampling
Clicking the Sampling tab can enter the sampling page, which displays sampling signals of selected device, as shown
in Figure 3-15.
Figure 3-15 Sampling signals
If some signal is in alarm status, it will be displayed in red.
Control
Clicking the Control tab can enter the control page, which displays control signals of selected device, as shown in
Figure 3-16.
Figure 3-16 Control signals
Click the Set button to control the device.
Setting
Clicking the Setting tab can enter the setting page, which displays setting signals of selected device, as shown in
Figure 3-17.
Figure 3-17 Setting signals

14 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
You can set several signals at the same time, and at most 16 signals can be set at the same time for each time.
Alarm
Clicking the Alarm tab can enter the alarm page, which displays alarm signals of selected device, as shown in
Figure 3-18.
Figure 3-18 Alarm signals
You can set alarm level of several alarm signals at the same time, and at most 16 signals can be set at the same time
for each time.
3.4.2 Safe Shutdown
On the RDU-SIC G2 homepage, click the Safe Shutdown menu on the left, two submenus appear, including
Shutdown Schedule and Server Shutdown.
Shutdown Schedule
Click Shutdown Schedule under the Safe Shutdown menu, the page shown in Figure 3-19 pops up.
Figure 3-19 Shutdown Schedule page
The Shutdown Schedule page is used to add, delete and modify schedule shutdown task of UPS devices.
As shown in Figure 3-19, type a task name of schedule shutdown in the field of Task Name, select a Target
Equipment, select whether to enable the task in the Status field, select ShutDown Mode and Open Mode, and then
add Open Time according to the corresponding prompt, the page is shown in Figure 3-20.
Figure 3-20 Schedule shutdown task list

Chapter 3 Web Page Of RDU-SIC G2 15
RDU-SIC G2 Card User Manual
Click the Add Schedule Shutdown button, the task will be successfully added. As shown in Figure 3-21, a new task
has been added in the schedule shutdown task list. The tasks in the task list will be executed automatically according
to their Enable/Disable status.
Figure 3-21 Schedule shutdown task list
The descriptions about the RDU-SIC G2 schedule shutdown function are as follows:
1. When the Open Mode is set to ‘Do Not Open Device’or ‘Open Device At Once’, the Open Time cannot be set, and
it is displayed as ‘--’;
2. The format of ShutDown Time changes with different options of ShutDown Mode automatically, as shown in
Figure 3-22.
Figure 3-22 Format of shutdown time
Note
1. The RDU-SIC G2 can support up to ten shutdown tasks.
2. Only when ‘Enable Device’is set for Status can the schedule shutdown task be enabled.
Server Shutdown
Click Server Shutdown under the Safe Shutdown menu, the Server Shutdown page will pop up, as shown in
Figure 3-23.
Figure 3-23 Server Shutdown page
On the Server Shutdown page, you can add and delete server shutdown task.

16 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
The procedures for adding a server shutdown task are as follows:
1. Select a UPS from the drop-down box of UPS Name;
2. In the Server IP field, type the IP address of the server to be closed;
3. Click the Add button, the server shutdown task is added, and the basic information of the UPS will be displayed in
the upper list of the page
Note
If you want to use the server shutdown function, please install ‘Vertiv network shutdown’software in the server.
The procedures for deleting a server shutdown task are as follows:
Select the task to be deleted in the server shutdown task list, and click the Delete button to finish the operation.
3.4.3 Alarm Management
The Alarm Management menu supplies alarm centralized management function, enabling you of self-defining alarm
notification and alarm linkage rules, and viewing historic alarm.
On the RDU-SIC G2 homepage, click the Alarm Management menu on the left, three submenus appear, including
Current Alarm, History Alarm and Alarm Notification.
Current Alarms
Click Current Alarms under the Alarm Management menu, or refer to 3.3.5 Real-Time Alarm Pop-Up Setting, the
current alarm list will pop up, as shown in Figure 3-24.
Figure 3-24 Current alarms
1. You can click the tabs above the alarm list to view current alarms according to alarm levels.
2. Click the Acknowledge button to confirm the alarm. After conformation, no alarm notification about the conformed
alarm will be sent.
3. When the mouse is located on the Confirmed link, the alarm confirming information will be hovered; when you
move the mouse, the information will disappear, as shown in Figure 3-25.
Figure 3-25 Confirming information
History Alarm
Click History Alarm under the Alarm Management menu to look over historical alarm records. Select a device (for
instance, ‘All Devices’) and set the start time and end time (for instance, from 2015-04-24 00:00:00 to 2015-04-24
23:59:59). Then click the Query button, all alarm records generated between the start time and end time will be listed,

Chapter 3 Web Page Of RDU-SIC G2 17
RDU-SIC G2 Card User Manual
including: Index, Device Name, Signal Name, Alarm Level, Trigger valve, Start Date/Time, Confirmed by,
Confirmed on Date/Time and End Date/Time, as shown in Figure 3-26.
Figure 3-26 History alarm query
Click the Download button to download the query results.
Alarm Notification
1. User Alarm Notification Configuration
Click the Alarm Notification under the Alarm Management menu, the page shown in Figure 3-27 pops up. You can
choose the notification method to receive notification of chosen level alarm from chosen equipment, meanwhile, you
can also choose the language of alarm notification information and customize the alarm content (including Equip name,
Alarm description, Alarm TIME and Alarm state by default).
Click the Save button to finish the alarm configuration. When an alarm is generated, the system will notify users
through the chosen notification method.
Note
1. Users must tick the notification method first in the Notification by check boxes, and then the alarm table below can be edited;
2. When all devices are chosen, all devices will be configured with the same alarm level;
3. When low level alarm is chosen, the alarm level above this level will also be chosen;
4. When some device is chosen, the highest level Critical Alarm will be chosen by default.
Figure 3-27 User alarm notification configuration
2. SMS And Email Server Configuration
Click the Alarm Notification under the Alarm Management menu, and then click the SMS And Email Server
Configuration tab, the page shown in Figure 3-28 pops up.

18 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
Figure 3-28 SMS/Email server configuration
On the page shown in Figure 3-28, you can perform SMS Modem Configuration for alarm notification reminding
through SMS or phone, you can also perform Email Server Configuration for alarm notification reminding through
email, the procedures are as follows:
SMS Modem Configuration
1) Connect an SMS Modem through USB port according to need, and choose Port Type, the page will display
Parameter automatically;
2) Choose SMS Modem (GPRS/CDMA) according to the SMS Modem type;
3) Set the communication parameter of the SMS Modem;
4) Click the Save Configuration button to save the configuration of current user’s SMS Modem.
Note
If the SMS Modem is connected through USB port, you need to set the jumper by referring to Table 2-1.
Email Server Configuration
1) Type the server IP address or domain name in the Email Server field;
2) Type the Server Port, Email User,Email Password and Sender Email Address in the corresponding fields;
3) Click the Save button to save the configuration of current user’s Email server.
Note
1. The Server Port is ‘25’by default. When SSL is chosen, the Server Port will become ‘465’automatically;
2. The Email User is ‘RDU-A’by default;
3. When using SSL, you need to ensure that the Email server supports SSL function.
3. Scheduled Notification Configuration
Click the Alarm Notification under the Alarm Management menu, and then click the Scheduled Notification
Configuration tab, the page shown in Figure 3-29 pops up.