Emfit SafeBed User manual
www.emt.com
29 September 2010
Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
Installation and User Guide
SafeBed™ and SafeSeat™
Bed / Seat Occupancy Monitor
User’s Manual with Operation and Installation
Instructions and Warranty Terms
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
2
IMPORTANT SAFETY PRECAUTIONS
ACCIDENTAL OR INTENTIONAL ADJUSTMENT OF KNOBS AND SWITCHES BY THE USER OR
SUBJECT MAY CAUSE:
DANGER NOTES
OTHER SYMBOLS USED
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
3
Table of Contents
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
4
1. GENERAL INFORMATION
1.1 Intended Use
1.2 Control Unit
1.3 Sensor
2. PACKAGE CONTENTS
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
5
3. BASIC SETTINGS
Always remove the batteries and unplug the AC adapter (if using) before making changes
to the DIP switch positions. If all sources of power are not removed the new settings will
not take effect!
3.1 Table of DIP Switch Setting
DIP # OFF (down) ON (up)
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
6
3.2 Setting the Notication Time Delay
Time Delay Switch # 1 Switch #2 Switch #3
3.3 Setting the Notication Sound Volume
Volume level Switch # 7 Switch #8
4. SETTING THE SENSITIVITY
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
7
5. INSTALLING THE SENSOR
5.1 Bed Sensor
The warranty does not apply if
sensor is damaged due to wear and tear.
5.2 Seat Sensor
The warranty does not apply if sensor is damaged due to wear and tear.
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
8
6. CONNECTORS AND WIRING
6.1 X2 (AUX) Connector Pin Order
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
9
7. INSTALLING THE WALL MOUNT AND THE DEVICE INTO IT
8. INSTALLING BATTERIES AND BATTERY CONSUMPTION
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
10
9. ABOUT THE OPTIONAL 5V ADAPTER
10. LED-LIGHT INDICATORS
1. Green LED / Presence
2. Blue LED / Power ON - Standby
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
11
3. Red LED / Fault
11. SW1 - RESET SWITCH / ON-OFF SWITCH
11.1 SW-1 As Reset Switch
11.2 SW-1 As On-Off Switch
12. TESTING AND INSPECTIONS
12.1 Weekly Inspection
12.2 Tests When Upon First Use and then Every Month
12.3 Testing the absence i.e. no movements notication
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
12
13. TROUBLESHOOTING
Notication is not getting forward via
other system the device is connected to:
Notication sound does not operate:
False notications without reason:
The device does not trigger absence i.e.
no movements notication and the green
light is blinking even if there is no one on
the bed
The device does not trigger absence i.e.
no movement notication and the green
light is off when there is no one on the
bed:
14. CLEANING
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
13
15. MATERIALS DISPOSAL
16. DECLARATION OF CONFORMITY (EU)
17. EMFIT LIMITED WARRANTY STATEMENT
YOUR GUARANTEE
TERMS
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
14
Exclusions and limitations
YOUR LEGAL RIGHTS RESERVED
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
15
18. TECHNICAL SPECIFICATIONS
Control Unit
Model:
Operating voltage:
Input / output connectors:
Dry-contact outputs:
Switches and controls:
Light indicators:
Notication delays:
Mounting:
Dimensions mm:
Weight:
Colour:
Enclosure protection:
Case:
Sensor
Model:
Type:
Placing:
Portability:
Dimension mm (L x W):
Thickness:
Weight:
Colour:
Surface material:
Cable length:
Environmental conditions
Operating temperature: °°
Storage and transportation Temperature: °°
Humidity: %%
Product classication
1
II
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
16
19. ELECTROMAGNETIC CONDITIONS
System specication:
Cable specication:
Note! RF communications equipment can effect medical electrical equipment!
Electromagnetic emissions
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
17
Electromagnetic immunity
Immunity test IEC 60601 test level Compliance level Electromagnetic
environment
±
±
±
±
±
U
U
U
U
U
U
U
U
NOTE UT is the A/C mains voltage prior to application of the test level.
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
18
Electromagnetic immunity
Immunity
test
IEC 60601
test level
Compliance
level Electromagnetic environment guidance
V
E
Recommended separation distance
P
d
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
19
V
EMFIT Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG
www.emt.com
20
Recommended separation distances between portable and mobile RF
communications equipment and the [EQUIPMENT or SYSTEM]
Rated
maximum
output
power of
transmitter
Separation distance according to frequency of transmitter
d
P
NOTE 1
NOTE 2
NOTE 3
NOTE 4
Other manuals for SafeBed
2
This manual suits for next models
1
Table of contents
