Empower COS326 User manual

5" 24V MAX CORDLESS ORBITAL SANDER
MODEL: COS326
Instruction Manual

1
TABLE OF CONTENTS
WARNING! Read and understand all instructions. Failure to follow all instructions
listed below may result in serious personal injury.
!
WARNING! When using electric tools, machines or equipment, basic safety
pre
cautions should always be followed to reduce the risk of fire, electric shock, and
per
sonal injury. Completely read the manual before proceeding to use this tool. KEEP
THESE INSTRUCTIONS.
!
IMPORTANT SAFETY INSTRUCTIONS.............................................................. p.2
SAFETY INSTRUCTIONS FOR CORDLESS SANDER....................................... p.5
SPECIFICATIONS................................................................................................ p.8
FUNCTIONAL DESCRIPTION............................................................................. p.9
ASSEMBLY........................................................................................................... p.9
OPERATION......................................................................................................... p.10
CLEANING, MAINTENANCE, AND LUBRICATION............................................. p.13
PARTS LIST.......................................................................................................... p.14
SCHEMATIC DRAWING ...................................................................................... p.15
CALIFORNIA PROP 65
WARNING: Some dust created by power sanding, sawing, grinding, drilling and
other constuction activities contains chemicals known to the state of California
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
●Lead from lead-based paints.
●Crystalline silica from bricks and cement and other masonry products, and arsenic
and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals, work in a well ventilated area with approved
safety equipment, such as those dust masks that are specially designed to filter out
microscopic particles.
For more information go to www.P65WARNINGs.ca.gov.
!
WARRANTY ......................................................................................................... p.16

2
IMPORTANT SAFETY INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark
areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a
power tool.
Distractions can cause you to lose control. Protect others in the
work area from debris such as chips and sparks. Provide barriers or
shields as needed.
ELECTRICAL SAFETY
Double Insulated tools are equipped with a polarized plug. This
power plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double Insulation eliminates the
need for the three wire grounded power cord and grounded power
supply system.
Avoid body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increased risk of
electric shock if your body is grounded.
Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
Handle the cord carefully. Never use the cord to carry the tools or
pull the plug from an outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged cords immediately by a
qualified professional. Damaged cords increase the risk of electric
shock.
When operating a power tool outside, use outdoor extensions cord
marked “W-A” or “W”. These cords are rated for outdoor use and
reduce the risk of electric shock.

3
IMPORTANT SAFETY INSTRUCTIONS
PERSONAL SAFETY
▪Stay alert, watch what you are doing, and use common sense when
operating a power tool. Do not use tool while tired or under the
influence of drugs, alcohol, or medication. A moment of
inattentiveness while operating power tools may result in serious
personalinjury.
▪Dress properly. Do not wear loose clothing or jewelry. Pull long hair
up and away from face. Keep your hair, clothing, and gloves away
from moving parts. Loose clothes, jewelry, or long hair can be
caught in movingparts.
▪Avoid accidental starting. Be sure switch is off before plugging in.
Carrying tools with your finger on the switch or plugging in tools
with the switch ON invites accidents.
▪Remove adjusting keys before turning the tool on. A wrench or a
key that is left attached to a rotating part of the tool may result in
personal injury.
▪Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enable better control of the tool in
unexpected situations.
▪Use safety equipment. Always wear eye protection. Dust mask,
non- skid safety shoes, hard hat, or hearing protection should
be used for appropriate conditions.
POWER TOOL USE AND CARE
▪Use clamps or other practical way to secure and support the work
piece to a stable platform. Holding the work by hand or against your
body is unstable and may lead to loss of control.
▪Do not force tool. Use the correct tool for your application. The
correct tool will do the job better and safer at the rate for which it is
designed.
▪Do not use tool if switch does not turn it ON or OFF. Any tool
that cannot be controlled with the switch is dangerous and must
be repaired.

4
IMPORTANT SAFETY INSTRUCTIONS
▪Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool. Such
preventive safety measures reduce the risk of starting the tool
accidentally.
▪Store idle tools out of reach of children and other untrained
persons. Tools are dangerous in the hands of untrained users.
▪Maintain tools with care. Keep accessories sharp and clean.
Properly maintained tools with sharp cutting edges are less likely to
bind and are easier to control. Do not use a damaged tool. Tag
damaged tools “Do Not Use” until repaired.
▪Check for misalignment or binding of moving parts, breakage of
parts, and any other condition that may affect the tool’s operation. If
damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
▪Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one tool may
become hazardous when used on another tool.
BATTERY TOOL USE AND CARE
▪Ensure the switch is in the off position before inserting the battery
pack. Inserting the battery pack into power tools that have the
switch ON may cause an accident.
▪Recharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a
risk of fire when used with another battery pack.
▪Use power tools only with specifically designed battery packs. Use
of any other battery packs may create a risk of injury orfire.
▪When battery pack is not in use, keep it away from other metal
objects like paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to
another. Shorting the terminals together may cause burns or afire.
a. Do not use the tool in wet or damp conditions.
b. Always keep the work area free of tripping hazards.
c. When using the tool, always ensure you are wearing protective

5
IMPORTANT SAFETY INSTRUCTIONS
safety equipment including safety glasses/goggles, ear plugs, dust
mask and other protective clothing including gloves and apron.
▪Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
SERVICE
▪Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could
result in a risk of injury.
▪When servicing a tool, use only identical replacement parts. Follow
instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance instructions may
create a risk of electric shock or injury.
SAFETY INSTRUCTIONS FOR CORDLESSSANDER
▪This power tool is intended to function as a sander. Read all safety
warnings, instructions, illustrations, and specifications provided with
this power tool. Failure to follow all instructions listed below may
result in electric shock, fire, and/or serious injury.
▪Operations such as grinding, wire brushing, polishing, or cutting off
are not recommended to be performed with this power tool.
Operations for which the power tool was not designed may create a
hazard and cause personal injury.
▪Do not use accessories which are not specifically designed
and recommended by the tool manufacturer. Just because the
accessory can be attached to your power tool, it does not assure
safe operation.
▪The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool. Accessories running

6
SAFETY INSTRUCTIONS FOR CORDLESS SANDER
faster than their RATED SPEED can break and fly apart.
▪The outside diameter and the thickness of your accessory must
be within the capacity rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or controlled.
▪The arbor size of wheels, flanges, backing pads or any other
accessory must properly fit the spindle of the power tool.
Accessories with arbor holes that do not match the mounting
hardware of the power tool will run out of balance, vibrate
excessively, and may cause loss of control.
▪Do not use a damaged accessory. Before each use inspect the
accessory such as abrasive wheels for chips and cracks, backing
pad for cracks, tear or excess wear, wire brush for loose or cracked
wires. if power tool or accessory is dropped, inspect for damage or
install an undamaged accessory. After inspecting and installing an
accessory, position yourself and bystanders away from the plane
of the rotating accessory and run the power tool at maximum no-
load speed for one minute. Damaged accessories will normally
break apart during this test time.
▪Wear personal protective equipment. Depending on application,
use face shield, safety goggles or safety glasses. as appropriate,
wear dust mask, hearing protectors, gloves, and workshop apron
capable of stopping small abrasive or workpiece fragments. the eye
protection must be capable of stopping flying debris generated by
various operations. The eye protection must be capable of stopping
flying debris generated by various operations. The dust mask or
respirator must be capable of filtering out particles generated by
your operation. Prolonged exposure to high intensity noise may
cause hearing loss.
▪Keep bystanders a safe distance away from work area. Anyone
entering the work area must wear personal protective equipment.
Fragments of workpiece or of a broken accessory may fly away and
cause injury beyond immediate area of operation.
▪Hold power tool by insulated gripping surfaces only, when
performingan operation where the accessory may contact hidden

7
SAFETY INSTRUCTIONS FOR CORDLESSSANDER
wiring or its own cord. An accessory contacting a ″live″ wire may
make exposed metal parts of the power tool ″live″ and shock the
operator.
▪Never lay the power tool down until the accessory has come to a
complete stop. The spinning accessory may grab the surface and
pull the power tool out of your control.
▪Do not run the power tool while carrying it at your side. Accidental
contact with the spinning accessory could snag your clothing,
pulling the accessory into your body.
▪Regularly clean the power tool’s air vents. The motor’s fan will
draw the dust inside the housing and excessive accumulation of
powdered metal may cause electrical hazards.
▪Do not operate the power tool near flammable materials. Sparks
could ignite these materials.
▪Do not use accessories that require liquid coolants. Using water or
other liquid coolants may result in electrocution or shock.
▪Maintain labels and nameplates on the tool. These carry
important safety information.
▪Avoid unintentional starting. Prepare to begin work before turning
on the tool.
▪Do not depress the spindle lock when starting or duringoperation.
▪Do not leave the tool unattended when the Battery Pack is
connected. Turn off the tool and remove the Battery Pack before
leaving.
▪Use clamps (not included) or other practical ways to secure and
support the workpiece to a stable platform. Holding the work by
hand or against your body is unstable and may lead to loss of
control and personal injury.
▪The battery charger gets hot during use. The charger’s heat can
build up to unsafe levels and create a fire hazard if it does not
receive adequate ventilation, due to an electrical fault, or if it is used
in a hot environment. Do not place the charger on a flammable
surface. Do not obstruct any vents on the charger. Especially
avoid placing the charger on carpets and rugs; they are not only

8
SAFETY INSTRUCTIONS FOR CORDLESS SANDER
flammable, but they also obstruct vents under the charger.
▪This product is not a toy.Keep it out of reach of children.
▪People with pacemakers should consult their physician(s) before
use. Electromagnetic fields in close proximity to heart pacemaker
could cause pacemaker interference or pacemaker failure.
▪In addition, people with pacemakers should:
▪Avoid operating alone.
▪Do not use with power switch locked on.
▪Properly maintain and inspect to avoid electrical shock.
▪Properly ground power cord. Ground Fault Circuit Interrupter
▪(GFCI) should also be implemented–it prevents sustained
electrical shock.
▪The warnings, precautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built
into this product but must be supplied by theoperator.
SPECIFICATIONS
Voltage: 24V Max
NO Load Speed (Variable Speed): 7000-11000 RPM
Pad Size: 5 in.
Switch Type: Dust Resistant
Battery Type: Li-ion
Charging Time: 1-2 Hours
Includes:
1 pc 24V Cordless Orbital Sander
1 pc 24V Lithium-ion battery(2000mAh)
1 pc Charger
1 pc Dust collection bag
10 pcs Sanding paper
1 pc Instruction manual

9
FUNCTIONALDESCRIPTION
A. Speed control knob
B. Switch
C. Battery lock button
D. 24V Lithium-ion battery
E. Dust collection bag
F.Dust outlet
G. Backing Pad
B
ASSEMBLY
▪Push the Dust Collection Bag toward the Locking Tabs, rotate it
counterclockwise until it snaps into place in the Tab Slots.
▪The collection of the dust will only work if the sandpaper has holes
that line up with the 8 dust collection holes in the Backing Pad.
There are 4 other holes in the Backing Pad for the Screws that
attach the Backing Pad to the Sander.
E
F
A
C
D
G

10
Light
Red Light
OPERATION
BATTERY AND CHARGER
▪The green light is the power indicator. When the charger is
connected to AC household current, the green light ison.
▪When the battery is properly inserted into the charger and charging,
the red light is on. When the battery is properly full charged, the red
light will turn off and the green light is on. Normal charging time is 1
to 2 hours. After the charging is completed, remove the battery
pack from the charging stand immediately.
▪When charging more than one battery pack, allow 15 minutes
between charges.
▪After many charge/discharge cycles, your battery will lose its ability
to hold a charge. It should then be replaced. Dispose of batteries at
an appropriate waste disposal facility. Do not throw batteries away
in common trash receptacles.
REMEMBER: This tool is cordless and does not need to be
connected to a power supply.
CAUTION: Do not expose either the tool or charger to the rain or
water. It is best not to overcharge the battery as this may damage
the battery. If the battery power is low, stop working and recharge
the battery pack. To prolong the using life of the tool, do not work
continually for more than 20 minutes at a time.
WARNING: When the machine is obstructed, please turn off the
switch right away and check if the work piece is right. An
obstruction may cause the machine motor to burn out.

11
OPERATION
Setting and testing
Attaching Sandpaper to the Backing pad
▪The Sanding Disc is attached by Hook and Loop to the Backing
Pad.
▪Unplug the sander before attaching Sanding Discs.
▪Place the desired Sanding Disc on the Backing Pad, lining up the 8
holes so that the dust can be collected into the Dust Bag.
Workpiece and Work area Set up
▪Designate a work area that is clean and well-lit.
▪The work area must not allow access by children or pets to prevent
distraction and injury.
▪Secure loose workpieces using a vise or clamps (not included) to
prevent movement while working.
▪There must not be hazardous objects, such as utility lines or foreign
objects, nearby that will present a hazard while working.
▪You must use personal safety equipment including, but not limited
to, ANSI-approved eye and hearing protection, as well as heavy-
duty work gloves.
Sanding instructions
WARNING:
TO PREVENT SERIOUS INJURY: Grip the tool firmly in both
hands.
WARNING:
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION:
Make sure that the Switch is in the off-position and remove its
Battery pack before performing any procedure in this section.

12
OPERATION
Wipe the work surface clean of all dirt and debris, especially that of
previous coarser sanding sessions, which will scratch the surface of
a finer grit sanding session.
▪Press the “O” on the Switch to place it in the off position, then
attach the battery.
▪To start, grip the tool firmly with both hands and press the “I” on the
Switch. Press the “O” on the Switch to stop the tool.
▪Wait until the tool has reached full speed, then gently contact the
surface.
▪Keep heavy pressure off the tool when operating. Allow the tool to
do the work.
▪Move the tool in a uniform pattern up and down or side to side while
sanding to ensure even sanding.
CAUTION! Empty the Dust Bag frequently and after use to prevent
fire hazard.
▪Periodically, press the “O” on the Switch to stop the tool and check
for disc wear and empty Dust Bag. Replace worn Sanding Disc(s)
as needed.
▪TO PREVENT ACCIDENTS, AFTERUSE:
Turn off the tool.
WARNING: Allow the tool to come to a complete stop before setting
it down. Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do
not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
WARNING:
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION:
Make sure that the Switch is in the off-position and remove its
Battery pack before performing any procedure in this section.

13
CLEANING, MAINTENANCE, ANDLUBRICATION
▪BEFORE EACH USE, inspect the general condition of the tool.
Check for:
•leaking, swollen, or cracked battery pack,
•loose hardware
•misalignment or binding of moving parts
•cracked or broken parts
•any other condition that may affect its safe operation.
▪AFTER USE, empty the Dust Bag and wipe external surfaces of the
tool with clean cloth.
▪Wear ANSI-approved safety goggles and NIOSH- approved
breathing protection and blow dust out of the motor vents using dry
compressed air periodically to increase tool life.
▪Disconnect battery pack and store battery pack, charger, and tool in
dry, indoor area out of reach of children and away from metal
objects (i.e., paperclips, coins) to prevent shorting.

14
No. Description Qty. No. Description Qty.
1 Screw 4 15 Motor bracket 1
2Sanding plate 1 16 Motor#755 1
3Backing pad 1 17 Speed control assembly 1
4 Screw 3 18 Switch 1
5 Washer 1 19 Switch dust-proof cover 1
6Balance block 120 Left housing 1
7 Screw 8 21 Screw 2
8Right housing 1 22 Dust outlet 1
9Fixed stand 1 23 O-Ring 1
10 Eccentric shaft 1 24 Dust collection shelf 1
11 Fan 1 25 Dust collection bag 1
12 Washer 1 26 Battery clip assembly 1
13 Rubber mat 2 27 PCB 1
14 Bearing 1 28 Battery 1
PARTS LIST
WARNING: Repairs should be made by an authorized repair center.
Opening this tool could invalidate your warranty.
NOTE: Due to continuous product improvement, we reserve the
right to change the product specication without prior notice.

15
SCHEMATIC DRAWING

16