Wireless audio streaming!
Use any Bluetooth enabled device and listen to your favorite music on this
new iHome station. We’ve adapted the iHome with six 2½" switches to
control tracks forward and backward, volume up and down, pause, and
on/off. The iHome features a dynamic speaker for full range of sounds, dual
alarm clocks; backlight LCD with time, and alarm time. Also has audio input
jack for non-Bluetooth devices (e.g. MP3 Player) and a USB port for
charging your devices. Size: 4½"L x 0"W x 4"H. Requires AC
Transformer (included) and 3 AAA Batteries (included). Weight: 3 lbs.
Operation:
. The Bluetooth iHome requires 3 AAA batteries (Not included). Use
alkaline batteries only (e.g. Duracell or Energizer brand). Do not use
rechargeable batteries or any other type of batteries because they supply
lower voltage and the unit will not perform properly. Never mix old and
new batteries together or different brands or types together.
2. Battery installation: Locate the battery compartment on the bottom of
the unit. Remove the battery cover. Install 3 new “AAA” batteries.
Replace cover. Reference the OEM instructions for setting date, time,
alarm settings ect. Plug the one end of the AC power transformer into the
back of the iHome and the other end in your wall outlet.
3. Please Reference the original manufacture instructions for Bluetooth
pairing of your device and for all of the docking station functions,
features as well as any additional troubleshooting info.
4. This Bluetooth iHome has been adapted with large activation switches
for easy access to the iHome controls. The user can be in command of
the tracks forward and backwards of his chosen album or playlist, control
of the volume up and down, pause, off /on of the unit and charging of the
idevice.
5. This station also has a dynamic speaker for full range of sounds, dual
alarm clocks for separate wake times which allow the user to awaken to
his favorite song. It has a programmable snooze, backlight LCD with
time and alarm time, line-in jack which plays CD, MP3 players and other
audio devices.
Please Reference the original manufacture instructions for all of the
Bluetooth iHome functions and features and any additional
troubleshooting info.
Troubleshooting:
Problem: Bluetooth iHome does not work.
Action #1: Check both connections for the AC power cord.
Action #2: Make sure that there is nothing inhibiting the depression of the
big button switches or holding any of the big buttons down.
Care & Maintenance:
. Keep the Bluetooth iHome clean by wiping it with a slightly damp cloth
when needed.
2. Keep the Bluetooth iHome out of direct sunlight and away from any direct
heat source.
4. Do not drop the Bluetooth iHome on a hard surface and do not expose it to
moisture or immerse it in water.
Rev 3/26/14
