ENACFIRE GEEK User manual

ENAC=IRE - GEEK
TRUE WIRELESS
fp
STEREO HEADPHONES
CA
ENACFIRE GEEK INSTRUCTION

Contents
@ English 01-13
@ Deutsch 14-27
@ Espafiol 28-41

Customer Support
[email protected] (US/CA)
[email protected] (UK)
We will reply to you within 24 hours and 100% solve your issues
Packaging List
W
Earphones x1 Charging Case x1
b O &E
Type-C Charging Manual Warranty Card
Cable x1 x1 x1

Product Overview
1. Charging port
2, Charging case LED light
3. Multifunctional button
4. Earphone LED
5. Earphone mic
6. Acoustic hole
7.L#R logo
8, Magnetic charging pin
9, Speaker

Power On & Pairing
Approach 1 - With Charging Case
1. Take out earphones from the
charging case
2, Select ‘ENACFIRE Geek’ fram
Bluetooth list

Approach 2 - Without Charging Case
1. Power On: Touch the earphones for 1 second.
Release when you hear the prompt sound ‘Power on!
with Blue light on.
touch 1 sec
oO ®
2. Palring: Earphones will pair automatically with Right
earphone Blue and White light flash alternately
3. Select 'ENACFIRE Geek' from the device's Bluetooth
list
Note: Right earphone Is the master earphone

Incoming call
Answer call / End call
Tap the Left / Right earphone once
Reject call
Touch the Left / Right earphone for 2 seconds
Touch for 2 sec

Music
Pause / Play
Tap the Left / Right earphone once to
pause / play music in the music mode > 7 il
(Some phones may require to start
a media player first)
Voice Assistant
Tap the Left / Right earphone 3
times, your device's Voice
Assistant will be activated with
the 'Beep' prompt sound

Next song
Double-tap the Right earphone
Previous song a
Double-tap the Left earphone
Adjust Volume
Touch and hold the Left earphone to decrease volume
Touch and hold the Right earphone to Increase volume
“fs
Note:
Above functions are not supported when the earphone
is used in single. Prompt sound ‘Beep’ will be produced
when the volume reach minimum or maximum level.

Power Off
Mode 1
With Charging Case
Put the earphones back to the charging case, they will power
off automatically.
Note: Put only the Left earphone into the charging case, the
Right earphone will stay connect.
Put only the Right earphone into the charging case, the Left
earphone will disconnect and start pairing.
Mode 2
Without Charging Case
1. Turn off Bluetooth to disconnect the earphones
2. Touch either one earphone for & seconds to power off
both earphones
‘Tauch for Bee!

Single Mode
Single
Mode
Earphone
With Charging
Case
1. Take out Left/ Right earphone from the
charging case
2, Select '—ENACFIRE Geek' from Bluetooth list
Without
Charging Case
1. Make sure both earphones are turn off
2. Touch the Left/ Right earphone for 1
second to turn on. Prompt sound ‘Pairing’
will be produced with Blue and White light
flash alternately
3, Select 'ENACFIRE Geek’ from Bluetooth list
Note: There will be two ‘ENACFIRE Geek’ Bluetooth names
for Left and Right earphones. Please select accordingly.

Charging
Earphones Charging Status
Earphones white LED light on: Charging
Earphones white LED light off: Fully charged
Note: It takes about 1.5 hours to fully charge the earphones
Charging Case Charging Status
Lights on charging case stands for the remaining battery
capacity
Note: It takes about 1.5 - 2 hours to fully charge the
charging case
e 1/4 Battery Left
ee 2/4 Battery Left
eee 3/4 Battery Left
© @ © © Fully Charged

Note
Please follow below steps when both earphones fall to palr
each other or occur connection related Issues
1. Place both earphones to charging case and remain
charging
2. Touch and hold the power buttons of both earphones for
8 seconds until Blue and White lights flash
3. Wait for 5 seconds, take out both earphones from
charging case
4, Delete the ‘ENACFIRE Geek’ Bluetooth name from your
phone and turn off Bluetooth
5, Turn on Bluetooth and click ‘ENACFIRE Geek’ from your
phone

Safety Instruction
Using earphones at high to moderate volumes for
extended perlods of time will result in permanent hearing
damage. It is advised that you keep volume levels moderate
to low at all times for your safety. Do not use while driving,
cycling, operating machinery or performing other activities
that require hearing surrounding sounds. Do not use
earphones in thunderstorm weather, the earphones may
not work properly in the bad weather condition, and may
increase the risk of being hit by lightning. Earphones may
not work properly under high temperature or high
humidity conditions, Do not use any corrosive cleaner/oil to
clean the earphones, If the earphones come in contact with
liquids, quickly wipe away. If submersed in the water, do
not turn the earphones on until it is completely dried.
Tips: Man-made damage and lost are not covered under
warranty. Keep the earphones and the packaging out of
reach of children.

Q&A
Q: Why the music cuts in and out sometimes?
A: Please make sure there is no obstacle between the
earphones and your device. Please make sure there Is no
Microwave oven / Wifi transmitter around you, which are
more likely to produce electromagnetic interference and
result in signal interruption.
Note: Please keep your phone and the earphone as close as
possible to ensure a more stable Bluetooth connection.
Q: What should | do if the earphones stop charging?
A: We recommend you to charge the earphones by using
our cable. If our cable do not work, please try to use
another charging cable or power source to charge the
earphones.
Q: How to contact ENACFIRE Customer Service Tearn?
A: If you have any Issue with the product, please contact us
via [email protected] (US/CA) / moongu@enac-
fireglobal.com (UK). We will reply to you within 24 hours
and 100% solve your issue.
13

NOTE: This equipment has been tested and found to comply with the limits for a
Class 6 digital device, pursuant ta part 16 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radia
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is na
quarantee that interference will not occur in @ particular installation. if this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and an, the user is encouraged ta
‘try to correct the interference by ane or more af the following measures
— Reorient or relocate the receiving antenna.
~ Increase the separation between the equipment and receiver.
—Cannect the equipment into an outlet an a circuit different fram that to which the
receiver is connected
—Consult the dealer ar an experienced radia/TV technician for help
Changes ar modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipme
This device complies with Part 15 of the FCG Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interferenoe received, including interference thet may cause
undesired operation
FCC ID: 2AV33-A305