Encore ENPS-MF1 User manual

ENPS-MF1
1 Port USB Multifunctional Print Server
Product Descriptions:
A. Interface:
USB: One USB 2.0 High speed compliant port, supporting 1.5 Mbps (low
speed), 12 Mbps (full speed) and 480 Mbps (high speed) data transmission rate.
This port automatically detects the make and model of the printer attached to
it.
LAN: Compliant with IEEE 802.3 / 802.2u standard, 10/100 Mbps auto
sensing, RJ 45 (UTP) connector.
* This product does not support use of USB hubs for daisy-chained connection, USB-to-Parallel
connectors, or USB cable extenders.
1

B. Key Software Specifications:
Setup CD Yes (Windows Setup CD-ROM)
Network Operating System Support Windows® 2000/XP and Windows Vista™
Network Protocol Support*UDPTCP/IP
DHCP (client) Support Yes
Management 1. Web interface
2. Windows-based Setup Program
3. Configuration Utility
Firmware Upgradeable 1. Web interface
2. TFTP
MFP Support Printing, Scan, Fax and Card reader
C. Hardware Specifications:
CPU Embedded high-performance RISC-cored SoC processor
Flash 1MB
System Memory 2 MB SDRAM
USB Port USB 2.0 standard compliant host controller
LAN Port 10/100 Mbps, auto-sensing
Reset Button Yes (Reset / Load Factory Defaults)
Power Supply 100-240V input / 3.3V, 2A Output
Dimension 74 (Length) x 63 (Width) x 30 (Height) mm
Weight 57 g (device only)
EMI Certifications CE / FCC Class B
Temperature Operating0 ~ 50°F; Storage-5 ~ 65°F
Humidity Operating0 ~ 70%; Storage0 ~ 80%
The specification is subject to change without prior notice.
2