ENDURAMAXX 136010 User manual

Disclaimer: All goods are sold in accordance with our standard terms and conditions for the sale of goods - available upon request. All prices exclude VAT. Product specifications and prices are
subject to change in line with our commitment to continuous improvement. Capacities and dimensions may vary due to manufacturing process. Colours represented may vary due to printing
process. Tank level graduations have been highlighted for visual effect. Tanks are not supplied from factory with highlighted graduations. E&OE.
Enduramaxx LLP |Outgang Road |The Fen |Baston |PE6 9PT |Telephone: [phone] |Fax: [phone]
www.enduramaxx.co.uk |sal[email protected]o.uk |Registered England & Wales OC370786
LAWN TRAILER SPRAYER KIT
OPERATOR’S
HANDBOOK
VALID FROM OCTOBER 2013
Outgang Road, Baston, PE6 9PT
www.enduramaxx.co.uk
0800
840
4030
F
R
E
E
P
H
O
N
E
©Enduramaxx LLP – Lawn Trailer Sprayer Kit – 04.10.13 Partnership Number OC370786
11
Part Number
136010
ITEM# PART NUMBER QTY DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
2
1
4
1
6
1
1
10
1
4
4
1
2
2
198010
198015
198020
198025
198027
198030
198035
135095
135096
Boom Mount
Frame
Carriage bolt, 5/16-18 x 1”
Front tank mount(For 25 gallon tank)
Bolt, 5/16-18 x 1”
Top Hitch plate
Bottom hitch plate
Nut, serrated, 5/16”
Tongue, 15&25 gallon sprayer
Bolt, 5/16-18 x 1”
Washer, 5/16
Axle, 55L and 95L Sprayer
Tire Assy., 10”
Push nut
Parts List Figure 136010

2
Introduction
The purpose of this manual is to assist you in the assembly, operation and
maintenance of your sprayer or accessories. Please read through this manual
completely too fully understand how to operate and maintain your equipment.
This product has been manufactured to provide years of dependable service; proper
operation and maintenance will ensure its dependability. Keep your manual in a safe,
convenient place for future reference. Always mention the model and part number in
any correspondence.
ASSEMBLY
The Lawn sprayer trailer kit is designed to fit many applications. It has been
specifically designed to attach easily to other Enduramaxx products. The following
instructions are intended for the attachment of a Enduramaxx 55 or 95 Litre spot
sprayer to the trailer kit. Please refer to the trailer figure in this manual for reference
to the following assembly instructions.
Trailer Assembly
Locate trailer frame and place frame upside down on smooth surface.
Locate the trailer axle and position it over the two slotted holes in the center of the
frame. Place two carriage bolts and nuts through the frame and axel. Tighten securely
ensuring trailer axle is square to the frame. Ensure carriage bolts are inserted from
the top of the frame through to the bottom; otherwise bolts will interfere with tank
mounting.
Turn the frame over and place two wheels over the axle. Using a hammer, position the
push nuts over the axle and tap lightly until push nut is seated firmly.
Attach the two boom mounting brackets to the back of the frame using four bolts and
nuts. Tighten securely.
Determine if the trailer frame is going to be mounted to a 55 Litre tank or a 95 litre
tank. The front tank mount is only required for 95 Litre tanks.
Place the front tank mount if required over the frame holes located at the front of
the trailer. Using two Carriage bolts and nuts, bolt the tank mount, frame and tongue
together. Tighten bolts securely.
Using two bolts and nuts, bolt the front hitch plates to the front of the tongue. Tighten
bolts securely. The top hitch plate can be mounted on the top or bottom to allow for
height adjustment to match garden tractor.
Tank mounting
Position sprayer tank over holes in trailer frame. Using the four bolts and washers,
thread all four bolts by hand into the tank. Position tank squarely on frame and
tighten bolts securely.
Boom Mounting
Following directions provided with boom manufacturer, mount boom to boom
brackets on trailer.
1
1
2
3
4
5
6
7
1
1
WARRANTY PARTS SERVICE
Products sold shall be warranted from defects in workmanship and material when
used within the service and scope for which they were designed for a period of one
year from date of purchase. Contact your distributor/ dealer for replacements parts
or warranty work. Please have your original sales receipt or other proof of purchase
date when requesting any warranty work.
To ensure the correct parts are acquired always provide the model number of your
sprayer/attachment and the part number and description obtained from the illustrated
parts breakdown in this manual.
All products are sold in accordance with our terms and conditions of sales of goods
dated 25.09.13. These terms and conditions can be found on our website. They are
also available upon request.