ENER-J Quve-060 Manual

1
1. Parameter:
Model: Quve-060
Rated Voltage: 90V-250V AC
Max. Current: 16A
Wireless Standard: Wi-Fi 2.4Ghz
Material: PC
2. Power up:
ON/OFF operating principle.
The connected appliances work/stop through
live wire power on/o󰀨.

5. Installation:
Install ENERJSMART app into smartphone or
tablet device or scan the Qr code, download
and install into smartphone or teblet device.
Download our
enerjsmart app ENERJSMART
Android iOS
To Download ENERJSMART App
Scan the QR Code

4
Enerjsmart
6. Download an app called Enerjsmart.

5
7. Once app is downloaded, open the app and
select Register.
Enerjsmart

6
8. The app should automatically detect your
country code. If not, please select the country
code for your country of residence.
9. Enter either your email address or phone
number. (If you enter your phone number you
will be sent a verication text message which
you will need in the Next step).

7
10. If you’re setting up using a phone number,
please enter the verication code that
was sent to your phone and your desired
password, then select Conrm.
11. If you’re setting up using an email address
please enter your desired password, and
select Conrm.

8
12. You have now successfully created an
account and you’re now ready to start setting
up your Smart bulbs and xtures.

9
Enerjsmart
13. Select the Plus (+) in the top right corner to
add a device.

10
14. Select type of Device you want to add.
For reference, we are showing with Relay
Switch.

11
15. Connect your Relay switch to a power source.
To enter pairing mode, turn the Relay switch
on and then o󰀨 for 3-5 seconds at a time.
Do this 3 times. The indicator light will begin
blinking rapidly once in pairing mode.
Similarly for other type of devices, there will
be di󰀨erent pairing mode. Ensure device is in
pairing mode for APP to connect with it.

12
16. Connect to your desired Wi-Fi network, enter
your password, then select Conrm.

13
17. If a blue box appears at the top of the screen
it means you’re currently not connected to a
Wi-Fi network.

14
18. Once you select Conrm after entering your
password, the app will start to pair the Relay
switch to your app.

15
19. If you get a message that says “Failed to
Add” it means that the connection has failed.
You may have to enter the Relay switch into
pairing mode again, and repeat steps 11
through 14.

16
20. Once your Relay switch successfully connects
to the app, the below screen will pop up and
you can change the name of your Relay
switch/device.
For Example: 16 Fixture. It’s best to make
this simple so that if you would like to connect
this to your Alexa App or Google Home, it will
be easier for the smart assistant to understand
which light you would like to control.
After naming your Relay switch, select Done.

17
21. You’re now able to control your Relay switch
in the Enerjsmart app.

18
Thank you for choosing ENER-J!
Customer satisfaction is our TOP priority, please let us
know how you felt about yourexperience. Happy? We are
so happy that you are pleased with our product. Feel free
to express your newfound joy! Share your experience by
writing a review.Not Happy? If you are not fully satised
with the item you received, have any problems like
damages, or questions, please contact us. We typically
respond within 24-48 hours.
Caution
Please Note
Products should be installed as per the instructions
mentioned in this manual and also as per current electrical
codes National Electric Code (NEC).
To avoid the risk of re, electrical shock or injury, it
is advisable that the installation is done by a trained
Electrician. Also it is important that mains power supply is
switched o󰀨 before the product is installed or repaired.
It is advisable to keep the manual for future reference.
Wi-Fi frequency is 2.4G and not 5G (5G not supported).
You can do this by contacting your broadband service
provider and requesting to either switch to 2,4G entirely or
split it between 2.4G and 5G.

19
If despite following the process as instructed above, you
still fail to add the device, then possibly there is a rewall
on your Wi-Fi router blocking this device to be connected
to your Wi-Fi Router. In such a case you would need
to disable the rewall, add this device following above
process and once the device is added, enable the rewalls
back again.
Stuck?
Confused?
Contact our Technical Support team on:
T: [phone]
E: [email protected]
Lines are open Mon - Fri (8am to 4pm)