Energica EsseEsse 9 User manual

EsseEsse 9 SIDE BAGS –Rack Kit Assembly instructions
Autohorized Energica Dealers

EsseEsse 9 Side Bags –Rack Kit Assembly instructions
SIDE BAGS AND RACK KIT –ENA003986
CLASS TIGHTENING TORQUE
A 6 Nm
B 30 Nm
C 10 Nm
D 10 Nm

EsseEsse 9 Side Bags –Rack Kit Assembly instructions

REMOVE THE RIGHT PASSENGER FOOTPEG REMOVE THE 2 RIGHT SCREWS OF THE
LICENSE PLATE HOLDER
EsseEsse 9 Side Bags –Rack Kit Assembly instructions

INSERT THE 2 BUSHINGS INSIDE THE
FOOTPEG HOUSING
PUT THE WASHERS ON THE FOOTPEG
SCREWS (B)
EsseEsse 9 Side Bags –Rack Kit Assembly instructions

FIT THE FOOTPEG SCREWS IN ORDER TO
MATCH THE RIGHT BAG HOLDER, THE
BUSHINGS AND THE FOOTPEG
FIT AND SCREW THE RIGHT FOOTPEG
WITHOUT COMPLETELY TIGHTENING
EsseEsse 9 Side Bags –Rack Kit Assembly instructions

SCREW THE RIGHT SIDE OF THE LICENCE
PLATE HOLDER WITHOUT COMPLETELY
TIGHTENING
REMOVE THE LEFT PASSENGER FOOTPEG
EsseEsse 9 Side Bags –Rack Kit Assembly instructions

SCREW T
REMOVE THE 2 LEFT SCREWS OF THE
LICENSE PLATE HOLDER
INSERT THE 2 BUSHINGS INSIDE THE
FOOTPEG HOUSING
EsseEsse 9 Side Bags –Rack Kit Assembly instructions

SCREW T
PUT THE WASHERS ON THE FOOTPEG
SCREWS (B)
FIT THE FOOTPEG SCREWS IN ORDER TO
MATCH THE LEFT BAG HOLDER, THE
BUSHINGS AND THE FOOTPEG
EsseEsse 9 Side Bags –Rack Kit Assembly instructions

SCREW T
FIT AND SCREW THE LEFT FOOTPEG
WITHOUT COMPLETELY TIGHTENING
SCREW THE LEFT SIDE OF THE LICENCE
PLATE HOLDER WITHOUT COMPLETELY
TIGHTENING
EsseEsse 9 Side Bags –Rack Kit Assembly instructions

SCREW T
UNDER THE LICENCE PLATE HOLDER FIT THE
INDICATED SCREW (D) AND TIGHTEN AT
10Nm / 7.4ft lb
TIGHTEN THE 4 FOOTPEGS SCREWS (B) AT
THE TORQUE OF 30Nm / 22.1ft lb
EsseEsse 9 Side Bags –Rack Kit Assembly instructions

SCREW T
TIGHTEN THE 4 LICENCE PLATE SCREWS (C)
AT THE TORQUE OF 10Nm / 7.4ft lb
ASSEMBLE THE 4 PINS ON THE LOWER PART
OF BOTH BAG RACKETS AS SHOWED IN THE
PICTURE
EsseEsse 9 Side Bags –Rack Kit Assembly instructions

SCREW T
TIGHTEN THE 4 PINS AT 6Nm / 4.4ft lb
EsseEsse 9 Side Bags –Rack Kit Assembly instructions