Energizer EZB2A User manual

ORIGINAL INSTRUCTIONS>EN
2.0Ah/4.0Ah LITHIUM ION BATTERY
EZB2A/EZB4A
USER GUIDE
CAUTION: Read this manual before using this machine!

©2022 Energizer. Energizer and certain graphic designs are trademarks of Energizer
Brands, LLC and related subsidiaries and are used under license by Builder SAS.
All other brand names are trademarks of their respective owners. Neither Builder SAS
nor Energizer Brands, LLC is affiliated with the respective owners of their trademarks.

Let’s get started.
You’re excited to power up, so we’ll keep this brief!

CONTENTS
1. SAFETY INSTRUCTIONS.....................................................................................................................5
2. COMPONENTS....................................................................................................................................... 8
3. OPERATION............................................................................................................................................8
4. MAINTENANCE AND STORAGE....................................................................................................... 9
5. TECHNICAL SPECIFICATIONS..........................................................................................................9
6. SYMBOLS EXPLANATION................................................................................................................10
7. DISPOSAL............................................................................................................................................. 10
8. WARRANTY.......................................................................................................................................... 11
9. PRODUCT FAILURE........................................................................................................................... 12
10. WARRANTY EXCLUSIONS.............................................................................................................13
04

1. SAFETY INSTRUCTIONS
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create a
risk of injury and fire.
c) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects that can make a
connection from one terminal to another.Shorting the
battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from
the battery. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
1.1 SPECIFIC SAFETY INSTRUCTIONS

The product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the product
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the product.
 Please read and observe these instructions before using
05

the product.
 The battery pack for this tool has been shipped in a low
charge condition. You should charge the battery pack fully
before use.

Do not incinerate the battery pack even if it is seriously
damaged or can no longer hold a charge.

The battery pack can explode in a fire.

Batteries can explode in the presence of a source of
ignition, such as a pilot light. To reduce the risk of serious
personal injury, never use any cordless product in the
presence of open flame. An exploded battery can propel
debris and chemicals. If exposed, flush with water
immediately.
 Do not crush, drop or damage battery pack. Do not use a
battery pack or charger that has been dropped or received a
sharp blow.
 A damaged battery is subject to explosion. Properly
dispose of a dropped or damaged battery immediately.
 A small leakage of liquid from the battery pack may occur
under extreme usage or temperature conditions. This does
not necessarily indicate a failure of the battery pack. However,
if the outer seal is broken and this leakage comes into contact
with your skin wash the affected area quickly with soap and
water. If the leakage gets in your eyes flush your eyes with
clean water for a minimum of 10 minutes and seek immediate
medical attention.
 Inform the medical staff that the liquid is a 25-35%
solution of potassium hydroxide.

Never attempt to open the battery pack for any reason. If
the plastic housing of the battery pack breaks open or cracks,
06

immediately discontinue its use and do not recharge it.
 Do not store or carry a spare battery pack in a pocket or
toolbox or any other place where it may come into contact
with metal objects. The battery pack may be short-circuited
causing damage to the battery pack, burns or a fire.
 Do not charge the battery in a damp or wet location.
Following this rule will reduce the risk of electric shock.

For best results, charge the battery in a location where the
temperature is more than 10°C but less than 40°C, to reduce
the risk of serious personal injury, do not store outside or in
vehicles.
 Never service damaged battery packs. Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
1.2 RE-CHARGEABLE BATTERIES

Batteries may leak or explode if not charged or handled
correctly. Always observe the following precautions when
handing batteries.
 Ensure that the machine is switched off before removing or
fitting batteries.

Do not use this battery with any other product.
 Do not attempt to fit the battery the wrong way round.

Do not short out, or attempt to dismantle the battery.

Do not expose the battery to flames or excessive heat.
 Do not immerse in or expose the battery to water.
 Do not store or transport the battery with loose metal
objects such as drill and drive bits.
 Never allow the battery to be fully discharged. To avoid
damage to the battery, remove or re-charge the battery when
no charge remains. Store the battery in a cool place when not
07

in use.
 After prolonged use the battery may become hot. Before
removing the battery, switch the machine off and allow the
battery to cool down. Do not use the battery if you notice any
discoloration or distortion of the battery casing.
2. COMPONENTS
1
Battery release catch
2
Charge level indicator
3
Charge level indicator button
3. OPERATION
3.1 CHARGING THE BATTERY PACK
IMPORTANT: The battery pack is not fully charged at the factory. Before attempting to
charge them, thoroughly read all of the safety instructions.

Assure that the charger you use are using matches your battery pack.
 Insert the charger into 220-240V~, 50-60Hz outlet. The indicator light (6) will turn green to
show the power is connected.

Insert the battery pack (4) into the slot of charger (5). Make sure the contact with the charger
is correct.

When charging, the indicator light (6) will turn red.
 When the battery pack fully charged, the indicator light (6) will turn green.
 Frequently monitor the charger and battery pack while connected.
 Unplug the charger and disconnect it from the battery pack when finished.
 Allow the battery pack to cool completely before using it.
 Store the charger and battery pack indoors, out of reach of children.
.
Battery pack
Charger (Not included)
EZB2A
EZCR20V-1
EZB4A
08

NOTE: If the battery does not fit properly, disconnect it and confirm that the battery
pack is the correct model for this charger as shown on the specification chart. Do not
charge any other battery pack or any battery pack that does not securely fit the charger.
NOTE: If battery is hot after continuous use in the tool, allow it to cool down to room
temperature before charging. This will extend the life of your batteries.
NOTE: Use your thumb or fingers to press the battery’s release button in and pull the
battery pack off at the same time.
Battery capacity indicator
There are battery capacity indicators on the battery pack, you can check the capacity status of
the battery if you press the button.
Insert and remove the battery from machine
 To remove the battery: press the battery release latch in and at the same time pull the battery
pack off.

To insert the battery: push the battery pack onto the contacts of the tool.
4. MAINTENANCE AND STORAGE
4.1 MAINTENANCE
The batteries have been designed to provide maximum trouble-free life. However, like all
batteries, they will eventually wear out. DO NOT disassemble battery pack and attempt to
replace the batteries. Handling of these batteries, especially when wearing rings and jewellery,
could result in serious burns.
To obtain the longest possible battery life, remove the battery pack from the charger once it is
fully charged and ready for use.
4.2 STORAGE
Store the battery pack where the temperature is below 27°C.
Store battery packs in a "charged" condition (minimum of 30%-50% charged).
To charge the battery pack after a six months storage period, it is recommended to discharge the
battery about 0%-20% (by running it in a tool) and charge afterwards to maximize the battery
lifetime.
5. TECHNICAL SPECIFICATIONS
Model
EZB2A
EZB4A
Voltage
20V d.c.
20V d.c.
Capacity
2.0Ah
4.0Ah
Charge time
60 minutes
120 minutes
Cell type
Lithium-ion
Lithium-ion
09

6. SYMBOLS EXPLANATION
Do not dispose of old appliances with domestic rubbish.
Conforms to relevant safety standards.
Do not expose batteries to temperatures exceeding 40 degrees.
Do not dispose of batteries in fire. They could explode and cause injury.
Do not dispose of batteries in water.
Recycling.
7. DISPPOSAL
Electric power tools, as well as their accessories and packaging, must each be able
to follow an appropriate recycling pathway. Only for the countries of the European
Union.
Do not throw away your electrical appliance with the household waste! In accordance
with the European Directive 2012/19/EU on waste electrical and electronic equipment
and its implementation in national laws, power tools that can no longer be used must
be separated and follow an appropriate recycling pathway.
10

WARRANTY
The manufacturer guarantees the product against defects in material and workmanship for a period of 2
years from the date of the original purchase. The warranty only applies if the product is for household use.
The warranty does not cover breakdowns due to normal wear and tear.
Due to our policy of continuous product improvement, we reserve the right to alter or change specications
without notice. Consequently, the product may be di󰀨erent from the information contained therein, but a
modication will be undertaken without notice if it is recognized as an improvement of the preceding
characteristic.
READ THE MANUAL CAREFULLY BEFORE USING THE MACHINE.
When ordering spare parts, please indicate the part number or code, you can nd this in the spare parts list
in this manual. Keep the purchase receipt; without it, the warranty is invalid. To help you with your product,
we invite you to contact us by phone or via our website:
• +33 (0)9.70.75.30.30
• https://services.swap-europe.com/contact
You must create a "ticket" via the web platform.
• Register or create your account.
• Indicate the reference of the tool.
• Choose the subject of your request.
• Describe your problem.
• Attach these les: invoice or sales receipt, photo
of the identication plate (serial number), photo
of the part you need (for example: pins on the
transformer plug which are broken).
The manufacturer agrees to replace parts identied as defective by the designated distributor. The
manufacturer does not accept responsibility for the replacement of the machine, in whole or in part, and/or
ensuing damage.
The warranty does not cover breakdowns due to:
• insu󰀩cient maintenance.
• abnormal assembly, adjustment or operations of the product.
• parts subject to normal wear and tear.
The warranty does not extend to:
• shipping and packaging costs.
• using the tool for a purpose other than that for which it was designed.
• the use and maintenance of the machine done in a manner not described in the user manual.
8. WARRANTY
11

WHAT TO DO IF MY MACHINE BREAKS DOWN?
the repairer will refuse the machine.
Go to the store with the complete machine and with the receipt or invoice.
the repairer will refuse the machine.
d) Contact the repair station to make sure it is available before dropping o󰀨 the machine.
For machines with engine failure from manufacturers BRIGGS & STRATTON, HONDA and RATO, please
refer to the following instructions.
Repairs will be done by approved engine manufacturers of these manufacturers, see their site:
• http://www.briggsandstratton.com/eu/fr
• http://www.honda-engines-eu.com/fr/service-network-page;jsessionid=5EE8456CF39CD572AA2AEEDFD
290CDAE
• https://www.rato-europe.com/it/service-network
Please keep your original packaging to allow for after-sales service returns or pack your machine
with a similar cardboard box of the same dimensions.
For any question concerning our after-sales service you can make a request on our website https://
services.swap-europe.com
Our hotline remains available at [phone].
If you bought your product on a website:
a) Empty the fuel tank if your product has one.
b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case,
Go to the repair station with the complete machine packed, accompanied by the purchase invoice and
the station support sheet downloadable after the service request is completed on the SWAP-Europe site.
If you bought your product in a store:
a) Empty the fuel tank if your product has one.
b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case,
c) Create a SWAP-Europe service ticket on the site: https://services.swap-europe.com.When making the
request on SWAP-Europe, you must attach the invoice and the photo of the nameplate (serial number).
9. PRODUCT FAILURE
12

THE WARRANTY DOES NOT COVER:
withdrawn.
• Replacement of consumables.
• The use of non-original parts.
• Breakage of parts following impacts or projections.
• Accessories breakdowns.
• Defects and their consequences linked to any external cause.
• Loss of components and loss due to insu󰀩cient screwing.
• Cutting components and any damage related to the loosening of parts.
• Overload or overheating.
• Poor power supply quality: faulty voltage, voltage error, etc.
• Damages resulting from the deprivation of enjoyment of the product during the time necessary for repairs
and more generally the costs related to the immobilization of the product.
• The use of a product which would show a defect or a breakage which was not the subject of an immediate
report and/or repair with the services of SWAP-Europe.
• Deterioration linked to transport and storage*.
• Launchers beyond 90 days.
• Oil, petrol, grease.
• Damages related to the use of non-compliant fuels or lubricants.
* In accordance with transport legislation, damage related to transport must be declared to carriers within 48
hours maximum after observation by registered letter with acknowledgement of receipt.
This document is a supplement to your notice, a non-exhaustive list.
Information:
Thermal devices must be wintered each season (service available on the SWAP-Europe site).
Batteries must be charged before being stored.
Reminder: The reserves do not exclude the notication by registered letter with acknowledgement within
72 hours.
• The costs of a second opinion established by a third party following an estimate by a SWAP-Europe repair
station.
• Start-up and setting up of the product.
• Damage resulting from normal wear and tear of the product.
• Damage resulting from improper use of the product.
• Damage resulting from assembly or start-up not in accordance with the user manual.
• Breakdowns related to carburetion beyond 90 days and fouling of carburetors.
• Periodic and standard maintenance events.
• Actions of modication and dismantling that directly void the warranty.
• Products whose original authentication marking (brand, serial number) has been degraded, altered or
10. WARRANTY EXCLUSIONS
Attention: All orders must be checked in the presence of the delivery person. In case of refusal by the
delivery person, you must simply refuse the delivery and notify your refusal.
13

NOTES
14

NOTES
15