Energrid VS150X User manual

Energrid VS150X Power Bank
User’s Manual
AudibleVersion
http: // bit.l y /2pco2go
To charge a digital device
1. Connect a USB charging cable to any of the USB Output Ports of VS150X.
2. Connect the digital device being charged with the other end of the USB charging cable.
3. Press the Power Button.
4. Depending on the alert mode selected, VS150X beeps and/or vibrates three times,
where each beep or vibration pulse is followed by a 10-second silence if a normal
connection has once been detected.
5. The digital device is now being charged.
To charge VS150X
1. Connect a USB charging cable to a USB power adaptor. The USB power adaptor with
a minimum output current of 2A that usually comes with a common smartphone or
tablet is good for charging VS150X.
2. Connect the other end of the USB charging cable to the USB Input Port of VS150X.
Power Button
USB Input Port
5V/2.0A
3. Depending on the alert mode selected, VS150X beeps and/or vibrates three times,
where each beep or vibration pulse is followed by a 10-second silence if a normal
connection is once detected.
4. VS150X is now being charged.
[1] USB Output Port
5V/3.0A
To check the battery level of VS150X
[2] USB Output Port
5V/3.0A
1. Press the Power Button.
2. Depending on the alert mode selected, VS150X beeps or vibrates in different patterns
indicating different battery levels of:
0 % - 25% VS150X beeps and/or vibrates once
VS150X 25% - 50% VS150X beeps and/or vibrates twice
50% - 75% VS150X beeps and/or vibrates three times
75% - 100% VS150X beeps and/or vibrates four times
1 2

Energrid VS150X Power Bank
User’s Manual
AudibleVersion
http: // bit.l y /2pco2go
To charge a digital device
1. Connect a USB charging cable to any of the USB Output Ports of VS150X.
2. Connect the digital device being charged with the other end of the USB charging cable.
3. Press the Power Button.
4. Depending on the alert mode selected, VS150X beeps and/or vibrates three times,
where each beep or vibration pulse is followed by a 10-second silence if a normal
connection has once been detected.
5. The digital device is now being charged.
To charge VS150X
1. Connect a USB charging cable to a USB power adaptor. The USB power adaptor with
a minimum output current of 2A that usually comes with a common smartphone or
tablet is good for charging VS150X.
2. Connect the other end of the USB charging cable to the USB Input Port of VS150X.
Power Button
USB Input Port
5V/2.0A
3. Depending on the alert mode selected, VS150X beeps and/or vibrates three times,
where each beep or vibration pulse is followed by a 10-second silence if a normal
connection is once detected.
4. VS150X is now being charged.
[1] USB Output Port
5V/3.0A
To check the battery level of VS150X
[2] USB Output Port
5V/3.0A
1. Press the Power Button.
2. Depending on the alert mode selected, VS150X beeps or vibrates in different patterns
indicating different battery levels of:
0 % - 25% VS150X beeps and/or vibrates once
VS150X 25% - 50% VS150X beeps and/or vibrates twice
50% - 75% VS150X beeps and/or vibrates three times
75% - 100% VS150X beeps and/or vibrates four times
1 2

D17083-UM-E
To select an alert mode
Press and hold the Power Button for two seconds for switching from Sound Mode to
Vibration Mode, or vice versa.
Cautions
●VS150X contains lithium polymer material, please handle with caution.
●Confirm the input voltage and current of the digital device before charging.
●Confirm the output voltage and current of the USB power adaptor before charging
VS150X.
●Do not use VS150X near a fire or in high-temperature condition.
●Do not use VS150X in wet condition.
●Do not disassemble or modify any parts of VS150X and its accessories.
●Do not operate a damaged VS150X.
●VS150X and its accessories are not toys for children and infants.
Technical Support & Customer Service
For technical questions or inquiries, please contact your local authorized dealers or email to:
[e-mail]
3 4