6/8 energysistem.com
Charging the battery
When the battery level is below 10%, the indicator (4) will flash red and you will hear a sound to remind you to charge
the battery.
The status indicator (4) will glow red while charging the device and will turn blue once the charging process has been
completed. Connect the microUSB end of the USB cable provided to the CHARGING PORT (5) of your headphones and
the other USB end to any device with an USB charging port that provides energy (PC, USB wall charger, car charger,
etc) to charge the battery. The charging time is approximately 3 hours.
Important considerations:
Do not store or leave your device completely discharged for a long period of time.
Bluetooth pairing
Once your Headphones 2 Bluetooth are off, press and hold the multifunction button (3) for approximately 2 seconds,
until the status indicator (4) starts flashing blue and red. At this point, your headphones and your Bluetooth device can
be paired. Once "Headphones 2" appears on your devide screen, press "connect". You will hear a sound that confirms
that both devices have been paired correctly.
If you previously paired your Headphones 2 with your music player, they will connect automatically next time. If you
want to synchronize them again, press the multifunction button (3) twice. You will hear a confirmation sound and the
lights will flash red and blue. At this point, your device can be paired once again.
Auto power off
In order to optimize battery life, your Headphones 2 Bluetooth will automatically turn off in the following situations:
After 5 minutes in search mode, if they are not synchronized with another device.
After 30 minutes, if they are synchronized and music is paused.
Bluetooth playback control
Once your Headphones 2 Bluetooth are syncronized, you will be able to control basic playback functions such as turning
up and down the volume and switching to the next or previous track directly from your headphones.
Press the VOLUME + (1) and VOLUME - (2) buttons to turn up and down the volume respectively. You will hear a sound
when reaching the maximum and minimum volume levels.
Press and hold the NEXT button (1) to switch to the next song. You can also press and hold the BACK button (2) to go
back to the previous song.
Press the MULTIFUNCTION button (3) once to pause or resume playback.
If you are using the audio cable instead of the Bluetooth connection, you will have to use your music player to
control music playback and not the headphones.
Call control
Once your Headphones 2 Bluetooth and smartphone are synchronized, you will be able to answer calls thanks to the
built-in microphone (7) while wearing your headphones.
Press the MULTIFUNCTION button (3) to answer an incoming call. If you are listening to music when you receive a call,
playback will pause and you will hear an incoming call sound. You can also press and hold this button for 2 seconds to
reject an incoming call.
Press the MULTIFUNCTION button (3) again to end a call. Playback will resume from the point when the music stopped.
Audio input
If you don't want to use the Bluetooth connection, you can also connect your Headphones 2 Bluetooth to your music
player using the audio cable provided. You don't need to switch on your headphones if you want to use this mode.
Simply connect one cable end to the AUDIO INPUT (6) and the other end to your music player to enable this mode.
