Enerlites DWTS User manual

12
INSTALLATION INSTRUCTIONS
3
DWTS
Air Circulator and Fan Switch
Voltage............................................................................................120VAC, 60Hz
Maximum Fan Load..................................................................1/4th hp or 3 Amps
Fan Time Delay..............................................................................5 to 60 minutes
Minutes per Hour..........................................................................10 to 60 minutes
SPECIFICATIONS
DESCRIPTION
Face Cover Removal and Timer Settings
REMOVAL
Push down on the cover/ push
button to release, then pull away
from main body.
REATTACH
Align the latch pins to the unit, push the
cover/ button against the main body,
then slide up until it's locked into place
Line
Ground
Neutral
Load
Brown
WARNING
Turn OFF circuit breaker or remove fuse(s) and test that power is OFF
before wiring. Wiring the fan switch live can cause serious risk of electrical
shock and/or damage the switch, voiding the warranty. FOR SAFETY,
THIS PRODUCT MUST BE INSTALLED IN A GROUNDED SWITCH BOX.
If you are unfamiliar with methods of installing electrical wiring, secure
the services of a qualified licensed electrician. USE ONLY COPPER WIRE,
DO NOT use aluminum wire with this device.
Use copper wires only. NEUTRAL WIRE IS REQUIRED.
WIRING DIRECTIONS
1. Connect BROWN wire from switch to the FAN wire.
2. Connect BLACK wire from switch to the HOT wire.
3. Connect WHITE wire from switch to the NEUTRAL wire.
4. Connect GREEN wire from switchto the GROUND wire.
Pressing "Fan ON/OFF" switches the fan (and the Blue LED light) ON and
OFF. When the fan is turned ON manually, the countdown timer will run your
fan for your selected period of time, then automatically shut your fan OFF for
you. For optimal use, we recommend adding together the time it takes you to
shower with the time it takes your bathroom to dry off after you shower, then
using that total as your setting for this timer.
This timer runs your fan for a selected amount of time every hour, to help
ensure good indoor air quality (it's also designed to help you more easily
comply with indoor air quality standards). For example, set to "Mode", the
MPH timer will never turn on. Set to "10" the Blue LED indicator will flash
twice, the MPH timer will turn your fan on 10 minutes every hour. Set to "30"
the Blue LED indicator will flash twice, the MPH timer will turn your fan on 30
minutes every hour. Set to "60" the Blue LED indicator will flash twice, the
MPH timer will run your fan for 60 minutes every other hour.
Fan LED Indicator
Blue LED Light: Lets you know when
your fan is on (especially useful for
fans with low sound levels).
Minutes Per Hour (MPH) Timer
Both Timers Work Together
Manual ON: If the MPH timer has your fan ON when you want to use the
countdown timer for a shower or bath, pressing the "Fan ON/OFF" button
twice will cancel the MPH timer and start the countdown timer in its place.
Manual OFF: If the MPH timer has your fan ON, and you manually turn it
OFF, that cancels out the MPH timer for the hour (the MPH timer will resume
normal function after one hour).
The DWTS is a 3 amp, single pole dual timer fan control to help conserve
energy and maintain good indoor air quality. This fan control offers a
countdown timer and a minutes per hour (MPH) timer. Best of all, the two
timers work together. The MPH timer sees when you've used the countdown
timer and knows not to run the fan for a while if you've already done it. If you
want to manually shut the fan off when the MPH timer is running, you can do
that too, just press the fan on/off button. The countdown timer can be set
anywhere from 5 to 60 minutes, and it activates any time you manually turn the
fan on. The MPH timer can be set to anywhere from 10 to 60 minutes and it
automatically runs your fan for a set time every hour to expel stale air and help
you maintain good indoor air quality (just the thing for complying with local
indoor air quality standards, such as ASHRAE 62.2).
FEATURES
•Dual timer fan control includes adjustable countdown timer and
adjustable minutes per hour timer
•Countdown timer allows you to choose how long fan will run
•Minutes per hour timer automatically turns the fan on every hour
•Includes manual bath fan control for immediate ventilation
•Blue LED indicator light activates to let you know fan is turned on
Countdown Timer

TROUBLESHOOTING
The fan is on but the speed is variable:
Check if the device is wired properly. This device requires a NEUTRAL wire
for operation. Often the WHITE wire is used as a LOAD wire. Be sure to test
ALL wires. Also make sure that the HOT and LOAD wires are not reversed.
The fan does not automatically turn on each hour
Check to see if the minute per hour setting not on "Mode"
This device is warranted to be free of material and workmanship defects for 2 years from the
date of purchase. Original receipt or proof of purchase from an authorized retailer must be
presented upon warranty claim. ALL claims must be verified and approved by Enerlites, Inc.
Warranties from other Enerlites products may vary. This warranty is nontransferable and does
not cover normal wear and tear or any malfunction, failure, or defect resulting from misuse,
abuse, neglect, alteration, modification, or improper installation. To the fullest extent
permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end user
customer of Enerlites products for direct, indirect, incidental, or consequential damages even
if Enerlites has been advised of the possibility of such damages. Enerlites’ total liability under
this or any other warranty, express or implied, is limited to repair, replacement or refund.
Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or
any other legal theory.
© 2020 Enerlites Inc. CA,
U.S.A.
WWW.ENERLITES.COM
0209020158-01
WARRANTY INFORMATION
4
56