H3C S5590-HI Series User manual

Contents
1 Product models and technical specifications············································1-2
Product models···············································································································································1-2
Technical specifications··································································································································1-2
S5590-HI switch series ···························································································································1-2
S5590-EI switch series····························································································································1-4
2 Chassis views··························································································2-8
S5590-HI switch series ···························································································································2-8
S5590-EI switch series··························································································································2-12
3 Removable components and compatibility matrixes ······························3-19
Removable power supplies···························································································································3-21
Removable fan trays·····································································································································3-22
Expansion cards············································································································································3-22
Connecting cables to the ports on expansion cards ·············································································3-24
4 Ports and LEDs······················································································4-25
Ports······························································································································································4-25
Console port··········································································································································4-25
Management Ethernet port ···················································································································4-25
USB port················································································································································4-25
SFP port················································································································································4-26
SFP+ port··············································································································································4-28
SFP28 port············································································································································4-31
QSFP+ port···········································································································································4-32
QSFP28 ports ·······································································································································4-34
10/100/1000BASE-T Ethernet port ·······································································································4-36
Combo interface····································································································································4-36
LEDs ·····························································································································································4-36
System status LED································································································································4-36
Power status LED ·································································································································4-36
Mode LED·············································································································································4-37
Management Ethernet port LED ···········································································································4-37
10/100/1000BASE-T autosensing Ethernet port LED···········································································4-37
SFP port LED········································································································································4-38
SFP+ port LED······································································································································4-38
Expansion card status LED···················································································································4-39
Port status LED on the expansion card·································································································4-39
Status LED on a power supply··············································································································4-39
Fan tray status LED on a fan tray ·········································································································4-39
5 Cooling system······················································································5-40

1 Product models and technical
specifications
Unless otherwise stated, power supplies and power modules are used interchangeably in this
document.
Product models
Table1-1 Switch series and models
Switch series Model Product code (PID)
S5590-HI switch
series Non-PoE models
S5590-28T8XC-HI LS-5590-28T8XC-HI
S5590-48T4XC-HI LS-5590-48T4XC-HI
S5590-28S8XC-HI LS-5590-28S8XC-HI
S5590-48S4XC-HI LS-5590-48S4XC-HI
S5590-EI switch
series
Non-PoE models
S5590-28T8XC-EI LS-5590-28T8XC-EI
S5590-48T4XC-EI LS-5590-48T4XC-EI
S5590-28S8XC-EI LS-5590-28S8XC-EI
LS-5590-28S8XC-EI-GL
S5590-48S4XC-EI LS-5590-48S4XC-EI
LS-5590-48S4XC-EI-GL
PoE models
S5590-28P8XC-EI LS-5590-28P8XC-EI
LS-5590-28P8XC-EI-GL
S5590-48P6XC-EI LS-5590-48P6XC-EI
LS-5590-48P6XC-EI-GL
Technical specifications
S5590-HI switch series
Table1-2 Technical specifications
Item S5590-28T8XC-H
I S5590-48T4XC-H I S5590-28S8XC-H I S5590-48S4XC-H I
Dimensions
(H × W × D)
44 × 440 × 400 mm
(1.73 × 17.32 ×
15.75 in)
44 × 440 × 400 mm
(1.73 × 17.32 ×
15.75 in)
44 × 440 × 400 mm
(1.73 × 17.32 ×
15.75 in)
44 × 440 × 400 mm
(1.73 × 17.32 ×
15.75 in)
Weight ≤8 kg (17.64 lb) ≤8 kg (17.64 lb) ≤8 kg (17.64 lb) ≤8 kg (17.64 lb)
Console port 1 × serial console port

Item S5590-28T8XC-H
I S5590-48T4XC-H I S5590-28S8XC-H I S5590-48S4XC-H I
USB port 1
Management
Ethernet port 1
SFP+ port 8 4 8 4
SFP port
4 (Each and its
corresponding
10/100/1000BASE-
T autosensing
Ethernet port form a
combo interface.)
N/A
28 (The four
highest-numbered
SFP ports and their
corresponding
10/100/1000BASE-
T autosensing
Ethernet ports form
combo interfaces.)
48 (The four
highest-numbered
SFP ports cannot be
used when the port
rate mode of the
expansion slots is
mode2.)
10/100/1000B
ASE-T
autosensing
Ethernet port
28 (The four
highest-numbered
10/100/1000BASE-
T autosensing
Ethernet ports and
their corresponding
SFP ports form
combo interfaces.)
48 (The four
highest-numbered
10/100/1000BASE-
T autosensing
Ethernet ports
cannot be used
when the port rate
mode of the
expansion slots is
mode 2.)
4 (Each and its
corresponding SFP
port form a combo
interface.)
N/A
Expansion
slot 2
Power supply
slot 2
Fan tray slot 2
Input voltage
AC input:
•Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz
•Max voltage range: 90 VAC to 264 VAC @ 47 Hz to 63 Hz
HVDC input:
•Rated voltage range: 240 VDC
•Max voltage range: 180 VDC to 320 VDC
Minimum
power
consumption
Single power input:
42 W
Dual power inputs:
47 W
Single power input:
44 W
Dual power inputs:
50 W
Single power input:
43 W
Dual power inputs:
49 W
Single power input:
47 W
Dual power inputs:
55 W
Maximum
power
consumption
Single power input:
136 W
Dual power inputs:
141 W
Single power input:
132 W
Dual power inputs:
136 W
Single power input:
138 W
Dual power inputs:
142 W
Single power input:
152 W
Dual power inputs:
156 W
Chassis
leakage
current
compliance
UL62368-1/EN62368-1/IEC62368-1/UL60950-1/EN60950-1/IEC60950-1/GB4943.1
Melting
current of
power supply
fuse
6.3 A/250 V
Operating
–5°C to +45°C (23°F to 113°F)

Item S5590-28T8XC-H
I S5590-48T4XC-H I S5590-28S8XC-H I S5590-48S4XC-H I
temperature
Operating
humidity 5% RH to 95% RH, noncondensing
Fire
resistance
compliance UL62368-1/EN62368-1/IEC62368-1/UL60950-1/EN60950-1/IEC60950-1/GB4943.1
S5590-EI switch series
Table1-3 Technical specifications for non-PoE switch models
Item S5590-28T8XC-E
I S5590-48T4XC-E I S5590-28S8XC-E I S5590-48S4XC-E I
Dimensions
(H × W × D)
44 × 440 × 360 mm
(1.73 × 17.32 ×
14.17 in)
44 × 440 × 360 mm
(1.73 × 17.32 ×
14.17 in)
44 × 440 × 360 mm
(1.73 × 17.32 ×
14.17 in)
44 × 440 × 360 mm
(1.73 × 17.32 ×
14.17 in)
Weight ≤7 kg (15.43 lb) ≤7 kg (15.43 lb) ≤7 kg (15.43 lb) ≤7 kg (15.43 lb)
Console port 1 × serial console port
USB port 1
Management
Ethernet port 1
SFP+ port 8 4 8 4
SFP port
4 (Each and its
corresponding
10/100/1000BASE-
T autosensing
Ethernet port form a
combo interface.)
N/A
28 (The four
highest-numbered
SFP ports and their
corresponding
10/100/1000BASE-
T autosensing
Ethernet ports form
combo interfaces.)
48
10/100/1000B
ASE-T
autosensing
Ethernet port
28 (The four
highest-numbered
10/100/1000BASE-
T autosensing
Ethernet ports and
their corresponding
SFP ports form
combo interfaces.)
48
4 (Each and its
corresponding SFP
port form a combo
interface.)
N/A
Expansion
slot 1
Power supply
slot 2
Fan tray slot 2
Input voltage
PSR180-12A-F/PSR180-12A-B power supply:
•Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz
•Max voltage range: 90 VAC to 290 VAC @ 47 Hz to 63 Hz
PSR180-12D-B power supply:

Item S5590-28T8XC-E
I S5590-48T4XC-E I S5590-28S8XC-E I S5590-48S4XC-E I
•Rated voltage range: –48 VDC to +60 VDC
•Max voltage range: –36 VDC to +72 VDC
DC power source for the PSR180-12D-B power supply: –48 VDC power source in the
equipment room or an RPS (H3C RPS800-A or RPS1600-A)
Minimum
power
consumption
Single power input:
38 W
Dual power inputs:
45 W
Single power input:
41 W
Dual power inputs:
48 W
Single power input:
39 W
Dual power inputs:
46 W
Single power input:
42 W
Dual power inputs:
49 W
Maximum
power
consumption
Single power input:
108 W
Dual power inputs:
114 W
Single power input:
105 W
Dual power inputs:
108 W
Single power input:
119 W
Dual power inputs:
123 W
Single power input:
137 W
Dual power inputs:
142 W
Chassis
leakage
current
compliance
UL62368-1/EN62368-1/IEC62368-1/UL60950-1/EN60950-1/IEC60950-1/GB4943.1
Melting
current of
power supply
fuse
6.3 A/250 V
Operating
temperature –5°C to +45°C (23°F to 113°F)
Operating
humidity 5% RH to 95% RH, noncondensing
Fire
resistance
compliance UL62368-1/EN62368-1/IEC62368-1/UL60950-1/EN60950-1/IEC60950-1/GB4943.1
Table1-4 Technical specifications for PoE switch models
Item S5590-28P8XC-EI S5590-48P6XC-EI
Dimensions
(H × W × D) 44 × 440 × 400 mm (1.73 × 17.32 × 15.75 in) 44 × 440 × 400 mm (1.73 × 17.32 × 15.75 in)
Weight ≤7 kg (15.43 lb) ≤7 kg (15.43 lb)
Console port 1 × serial console port
USB port 1
Management
Ethernet port 1
SFP+ port 8 6
SFP port 4 (Each and its corresponding
10/100/1000BASE-T autosensing Ethernet
port form a combo interface.) N/A
10/100/1000B
ASE-T
autosensing
Ethernet port
28 (The four highest-numbered
10/100/1000BASE-T autosensing Ethernet
ports and their corresponding SFP ports
form combo interfaces.)
48
Expansion
slot 1

Item S5590-28P8XC-EI S5590-48P6XC-EI
Power supply
slot 2
Fan tray slot 2
Input voltage
•AC power input:
Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz
Max voltage range: 90 VAC to 290 VAC @ 47 Hz to 63 Hz
•HVDC power input:
Rated voltage range: 240 VDC
Max voltage range: 180 VDC to 320 VDC
Minimum
power
consumption
Single power input: 48 W
Dual power inputs: 53 W Single power input: 52 W Dual power inputs: 59 W
Maximum
power
consumption
Single power input: 938 W
Dual power inputs: 1046 W Single power input: 945 W Dual power inputs: 1745 W
Chassis
leakage
current
compliance
UL62368-1/EN62368-1/IEC62368-1/UL60950-1/EN60950-1/IEC60950-1/GB4943.1
Melting
current of
power supply
fuse
•PSR600-54A-B power supply: 10 A/500 V
•PSR920-54A-B power supply: 16 A/250 V
•PSR1600-54A-B power supply: 16 A/250 V
Operating
temperature –5°C to +45°C (23°F to 113°F)
Operating
humidity 5% RH to 95% RH, noncondensing
Fire
resistance
compliance UL62368-1/EN62368-1/IEC62368-1/UL60950-1/EN60950-1/IEC60950-1/GB4943.1
Table1-5 PoE power capacity of the S5590-28P8XC-EI and S5590-48P6XC-EI switches
Power supply
configuration
S5590-28P8XC-EI S5590-48P6XC-EI
Total PoE
power capacity
Max PoE power
capacity per
port
Total PoE
power capacity
Max PoE power
capacity per
port
1 × PSR600-54A-B 450 W 30 W 450 W 30 W
1 × PSR920-54A-B 770 W 30 W 770 W 30 W
1 ×
PSR1600-54A-B
(input voltage: 90
VAC to 176 VAC)
770 W 30 W 770 W 30 W
1 ×
PSR1600-54A-B
(input voltage: 176
VAC to 1290 VAC
or 180 VDC to 320
VDC)
1000 W 30 W 1450 W 30 W

Power supply
configuration
S5590-28P8XC-EI S5590-48P6XC-EI
Total PoE
power capacity
Max PoE power
capacity per
port
Total PoE
power capacity
Max PoE power
capacity per
port
2 × PSR600-54A-B 1000 W 30 W 1020 W 30 W
1 × PSR600-54A-B
and 1 ×
PSR920-54A-B 1000 W 30 W 1020 W 30 W
1 × PSR600-54A-B
and 1 ×
PSR1600-54A-B
(input voltage: 90
VAC to 176 VAC)
1000 W 30 W 1020 W 30 W
1 × PSR920-54A-B
and 1 ×
PSR1600-54A-B
(input voltage: 176
VAC to 1290 VAC)
1000 W 30 W 1260 W 30 W
1 × PSR600-54A-B
and 1 ×
PSR1600-54A-B
(input voltage: 176
VAC to 1290 VAC
or 180 VDC to 320
VDC)
1000 W 30 W 1020 W 30 W
1 × PSR920-54A-B
and 1 ×
PSR1600-54A-B
(input voltage: 176
VAC to 1290 VAC
or 180 VDC to 320
VDC)
1000 W 30 W 1600 W 30 W
1 ×
PSR1600-54A-B
(input voltage: 176
VAC to 1290 VAC)
and 1 ×
PSR1600-54A-B
(input voltage: 176
VAC to 1290 VAC
or 180 VDC to 320
VDC)
1000 W 30 W 1600 W 30 W
2 × PSR920-54A-B 1000 W 30 W 1600 W 30 W
2 ×
PSR1600-54A-B
(input voltage: 90
VAC to 176 VAC)
1000 W 30 W 1600 W 30 W
2 ×
PSR1600-54A-B
(input voltage: 176
VAC to 1290 VAC
or 180 VDC to 320
VDC)
1000 W 30 W 1680 W 30 W

2 Chassis views
S5590-HI switch series
S5590-28T8XC-HI
Figure2-1 Front panel
(1) 10/100/1000BASE-T autosensing Ethernet port (2) 10/100/1000BASE-T autosensing Ethernet port
LED
(3) Console port (CONSOLE)
(4) Mode button
(5) System status LED (SYS)
(6) Mode LED (MODE)
(7) Expansion card status LED 1 (SLOT1)
(8) Expansion card status LED 2 (SLOT2)
(9) USB port
(10) Management Ethernet port LED (ACT/LINK)
(11) Management Ethernet port (MGMT)
(12) SFP+ port LED
(13) SFP+ port
(14) SFP port
(15) SFP port LED
Figure2-2 Rear panel
(1) Grounding screw
(2) Fan tray 1
(3) Expansion card 1
(4) Expansion card 2
(5) Fan tray 2
(6) Power supply 1
(7) Power supply 2
The S5590-28T8XC-HI switchcame with power supply slot 1 empty and power supply slot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-2,
two PSR250-12A1 AC power supplies are installed in the power supply slots.

The S5590-28T8XC-HI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-2, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-28T8XC-HI switch came with two expansion slots each installed with a filler panel. You
can select expansion cards for the switch as required. In Figure2-2, two LSWM2QP2P interface
cards are installed in the expansion slots.
S5590-48T4XC-HI
Figure2-3 Front panel
(1) 10/100/1000BASE-T autosensing Ethernet port (2) 10/100/1000BASE-T autosensing Ethernet port
LED
(3) SFP+ port
(4) Console port (CONSOLE)
(5) Mode button
(6) System status LED (SYS)
(7) Mode LED (MODE)
(8) Expansion card status LED 1 (SLOT1)
(9) Expansion card status LED 2 (SLOT2)
(10) USB port
(11) Management Ethernet port LED (ACT/LINK)
(12) Management Ethernet port (MGMT)
(13) SFP+ port LED
Figure2-4 Rear panel
(1) Grounding screw
(2) Fan tray 1
(3) Expansion card 1
(4) Expansion card 2
(5) Fan tray 2
(6) Power supply 1
(7) Power supply 2
The S5590-48T4XC-HI switch came with power supply slot 1 empty and power supply slot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-4,
two PSR250-12A1 AC power supplies are installed in the power supply slots.
The S5590-48T4XC-HI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-4, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-48T4XC-HI switch came with two expansion slots each installed with a filler panel. You
can select expansion cards for the switch as required. In Figure2-4, two LSWM2QP2P interface
cards are installed in the expansion slots.

S5590-28S8XC-HI
Figure2-5 Front panel
(1) SFP port
(2) SFP port LED
(3) Console port (CONSOLE)
(4) Mode button
(5) System status LED (SYS)
(6) Mode LED (MODE)
(7) Expansion card status LED 1 (SLOT1)
(8) Expansion card status LED 2 (SLOT2)
(9) USB port
(10) Management Ethernet port LED (ACT/LINK)
(11) Management Ethernet port (MGMT)
(12) SFP+ port LED
(13) SFP+ port
(14) 10/100/1000BASE-T autosensing Ethernet port
(15) 10/100/1000BASE-T autosensing Ethernet port LED
Figure2-6 Rear panel
(1) Grounding screw
(2) Fan tray 1
(3) Expansion card 1
(4) Expansion card 2
(5) Fan tray 2
(6) Power supply 1
(7) Power supply 2
The S5590-28S8XC-HI switch came with power supply slot 1 empty and power supply slot 2
installed with a filler panel. You can install one or two power supplies for the switch as required. In
Figure2-6, two PSR250-12A1 AC power supplies are installed in the power supply slots.
The S5590-28S8XC-HI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-6, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-28S8XC-HI switch came with two expansion slots each installed with a filler panel. You
can select expansion cards for the switch as required. In Figure2-6, two LSWM2QP2P interface
cards are installed in the expansion slots.

S5590-48S4XC-HI
Figure2-7 Front panel
(1) SFP port
(2) SFP port LED
(3) SFP+ port
(4) Console port (CONSOLE)
(5) Mode button
(6) System status LED (SYS)
(7) Mode LED (MODE)
(8) Expansion card status LED 1 (SLOT1)
(9) Expansion card status LED 2 (SLOT2)
(10) USB port
(11) Management Ethernet port LED (ACT/LINK)
(12) Management Ethernet port (MGMT)
(13) SFP+ port LED
Figure2-8 Rear panel
(1) Grounding screw
(2) Fan tray 1
(3) Expansion card 1
(4) Expansion card 2
(5) Fan tray 2
(6) Power supply 1
(7) Power supply 2
The S5590-48S4XC-HI switch came with power supply slot 1 empty and power supply slot 2
installed with a filler panel. You can install one or two power supplies for the switch as required. In
Figure2-8, two PSR250-12A1 AC power supplies are installed in the power supply slots.
The S5590-48S4XC-HI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-8, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-48S4XC-HI switch came with two expansion slots each installed with a filler panel. You
can select expansion cards for the switch as required. In Figure2-8, two LSWM2QP2P interface
cards are installed in the expansion slots.

S5590-EI switch series
S5590-28T8XC-EI
Figure2-9 Front panel
(1) 10/100/1000BASE-T autosensing Ethernet port (2) 10/100/1000BASE-T autosensing Ethernet port
LED
(3) SFP port
(4) SFP+ port
(5) Management Ethernet port (MGMT)
(6) Console port (CONSOLE)
(7) Mode button
(8) USB port
(9) System status LED (SYS)
(10) Mode LED (MODE)
(11) Expansion card status LED (SLOT)
(12) Power supply 2 status LED (PWR2)
(13) Power supply 1 status LED (PWR1)
(14) Management Ethernet port LED (ACT/LINK)
(15) SFP+ port LED
(16) SFP port LED
Figure2-10 Rear panel
(1) Grounding screw
(2) Expansion card
(3) Fan tray 1
(4) Fan tray 2
(5) Power supply 1
(6) Power supply 2
The S5590-28T8XC-EI switch came with power supply slot 1 empty and power supplyslot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-10,
two PSR180-12A-B AC power supplies are installed in the power supply slots.
The S5590-28T8XC-EI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-10, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-28T8XC-EI switch came with one expansion slot installed with a filler panel. You can
select an expansion card for the switch as required. In Figure2-10, an LSWM2QP2P interface card is
installed in the expansion slot.

S5590-48T4XC-EI
Figure2-11 Front panel
(1) 10/100/1000BASE-T autosensing Ethernet port (2) 10/100/1000BASE-T autosensing Ethernet port
LED
(3) Management Ethernet port (MGMT)
(4) Console port (CONSOLE)
(5) Mode button
(6) USB port
(7) System status LED (SYS)
(8) SFP+ port
(9) Mode LED (MODE)
(10) Expansion card status LED (SLOT)
(11) Power supply 2 status LED (PWR2)
(12) Power supply 1 status LED (PWR1)
(13) Management Ethernet port LED (ACT/LINK)
(14) SFP+ port LED
Figure2-12 Rear panel
(1) Grounding screw
(2) Expansion card
(3) Fan tray 1
(4) Fan tray 2
(5) Power supply 1
(6) Power supply 2
The S5590-48T4XC-EI switch came with power supply slot 1 empty and power supplyslot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-12,
two PSR180-12A-B AC power supplies are installed in the power supply slots.
The S5590-48T4XC-EI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-12, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-48T4XC-EI switch came with one expansion slot installed with a filler panel. You can
select an expansion card for the switch as required. In Figure2-12, an LSWM2QP2P interface card is
installed in the expansion slot.

S5590-28S8XC-EI
Figure2-13 Front panel
(1) SFP port
(2) SFP port LED
(3) 10/100/1000BASE-T autosensing Ethernet port
LED
(4) Management Ethernet port (MGMT)
(5) Console port (CONSOLE)
(6) Mode button
(7) USB port
(8) System status LED (SYS)
(9) Mode LED (MODE)
(10) Expansion card status LED (SLOT)
(11) Power supply 2 status LED (PWR2)
(12) Power supply 1 status LED (PWR1)
(13) Management Ethernet port LED (ACT/LINK)
(14) SFP+ port
(15) SFP+ port LED
(16) 10/100/1000BASE-T autosensing Ethernet port
Figure2-14 Rear panel
(1) Grounding screw
(2) Expansion card
(3) Fan tray 1
(4) Fan tray 2
(5) Power supply 1
(6) Power supply 2
The S5590-28S8XC-EI switch came with power supply slot 1 empty and power supply slot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-14,
two PSR180-12A-B AC power supplies are installed in the power supply slots.
The S5590-28S8XC-EI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-14, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-28S8XC-EI switch came with one expansion slot installed with a filler panel. You can
select an expansion card for the switch as required. In Figure2-14, an LSWM2QP2P interface card is
installed in the expansion slot.

The S5590-28S8XC-EI switch with PID LS-5590-28S8XC-EI-GL supports shipping with fan trays
and power supplies installed. For the switch to be shipped with fan trays or power supplies installed,
contact the marketing staff.
S5590-48S4XC-EI
Figure2-15 Front panel
(1) SFP port
(2) SFP port LED
(3) Management Ethernet port (MGMT)
(4) Console port (CONSOLE)
(5) Mode button
(6) USB port
(7) System status LED (SYS)
(8) SFP+ port
(9) Mode LED (MODE)
(10) Expansion card status LED (SLOT)
(11) Power supply 2 status LED (PWR2)
(12) Power supply 1 status LED (PWR1)
(13) Management Ethernet port LED (ACT/LINK)
(14) SFP+ port LED
Figure2-16 Rear panel
(1) Grounding screw
(2) Expansion card
(3) Fan tray 1
(4) Fan tray 2
(5) Power supply 1
(6) Power supply 2
The S5590-48S4XC-EI switch came with power supply slot 1 empty and power supply slot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-16,
two PSR180-12A-B AC power supplies are installed in the power supply slots.
The S5590-48S4XC-EI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-16, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-48S4XC-EI switch came with one expansion slot installed with a filler panel. You can
select an expansion card for the switch as required. In Figure2-16, an LSWM2QP2P interface card is
installed in the expansion slot.

The S5590-48S4XC-EI switch with PID LS-5590-48S4XC-EI-GL supports shipping with fan trays
and power supplies installed. For the switch to be shipped with fan trays or power supplies installed,
contact the marketing staff.
S5590-28P8XC-EI
Figure2-17 Front panel
(1) 10/100/1000BASE-T autosensing Ethernet port (2) 10/100/1000BASE-T autosensing Ethernet port
LED
(3) SFP port
(4) SFP+ port
(5) Management Ethernet port (MGMT)
(6) Console port (CONSOLE)
(7) Mode button
(8) USB port
(9) System status LED (SYS)
(10) Mode LED (MODE)
(11) Expansion card status LED (SLOT)
(12) Power supply 2 status LED (PWR2)
(13) Power supply 1 status LED (PWR1)
(14) Management Ethernet port LED (ACT/LINK)
(15) SFP+ port LED
(16) SFP port LED
Figure2-18 Rear panel
(1) Grounding screw
(2) Expansion card
(3) Fan tray 1
(4) Fan tray 2
(5) Power supply 1
(6) Power supply 2
The S5590-28P8XC-EI switch came with power supply slot 1 empty and power supply slot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-18,
two PSR600-54A-B AC power supplies are installed in the power supply slots.
The S5590-28P8XC-EI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-18, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.

The S5590-28P8XC-EI switch came with one expansion slot installed with a filler panel. You can
select an expansion card for the switch as required. In Figure2-18, an LSWM2QP2P interface card is
installed in the expansion slot.
The S5590-28P8XC-EI switch with PID LS-5590-28P8XC-EI-GL supports shipping with fan trays
and power supplies installed. For the switch to be shipped with fan trays or power supplies installed,
contact the marketing staff.
S5590-48P6XC-EI
Figure2-19 Front panel
(1) 10/100/1000BASE-T autosensing Ethernet port (2) 10/100/1000BASE-T autosensing Ethernet port
LED
(3) SFP+ port
(4) Console port (CONSOLE)
(5) Mode LED (MODE)
(6) System status LED (SYS)
(7) Power supply 1 status LED (PWR1)
(8) Power supply 2 status LED (PWR2)
(9) Expansion card status LED (SLOT)
(10) USB port
(11) Mode button
(12) Management Ethernet port LED (ACT/LINK)
(13) Management Ethernet port (MGMT)
(14) SFP+ port LED
Figure2-20 Rear panel
(1) Grounding screw
(2) Expansion card
(3) Fan tray 1
(4) Fan tray 2
(5) Power supply 1
(6) Power supply 2
The S5590-48P6XC-EI switch came with power supply slot 1 empty and power supply slot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-20,
two PSR600-54A-B AC power supplies are installed in the power supply slots.
The S5590-48P6XC-EI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In Figure2-20, two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-48P6XC-EI switch came with one expansion slot installed with a filler panel. You can
select an expansion card for the switch as required. In Figure2-20, an LSWM2QP2P interface card is
installed in the expansion slot.

The S5590-48P6XC-EI switch with PID LS-5590-48P6XC-EI-GL supports shipping with fan trays
and power supplies installed. For the switch to be shipped with fan trays or power supplies installed,
contact the marketing staff.

3 Removable components and
compatibility matrixes
The switch supports removable components. Table3-1 describes the removable components
available for the switch.
Table3-1 Compatibility matrix between switches and removable components
FRU model
S5590-28T8XC-
HI
S5590-28S8XC-
HI
S5590-48T4XC-
HI
S5590-48S4XC-
HI
S5590-28T8XC-
EI
S5590-28S8XC-
EI
S5590-48T4XC-
EI
S5590-48S4XC-
EI
S5590-28P8XC-
EI
S5590-48P6XC-
EI
Removable power supplies
PSR250-12A Supported Supported Not supported Not supported
PSR250-12A1 Supported Supported Not supported Not supported
PSR180-12A-B Not supported Not supported Supported Not supported
PSR180-12A-F Not supported Not supported Supported Not supported
PSR180-12D-B Not supported Not supported Supported Not supported
PSR600-54A-B Not supported Not supported Not supported Supported
PSR920-54A-B Not supported Not supported Not supported Supported
PSR1600-54A-B Not supported Not supported Not supported Supported
Removable fan trays
LSPM1FANSA-S
N Supported Supported Supported Supported
LSPM1FANSB-S
N Supported Supported Supported Supported
Expansion cards
LSPM6FWD Supported
Expansion cards
supported by
expansion slots 1
and 2 depend on
the port rate mode.
For more
information, see
Table3-2.
Supported Supported
LSWM2EC Supported Supported Supported
LSWM2QP2P Supported Supported Supported
LSWM2SP8P Supported Supported Supported
LSWM2ZQP2P Supported Supported Supported
LSWM2ZSP8P Supported Supported Supported
LSWM2SP2PB Supported Supported Supported
LSWM2SP4PB Supported Supported Supported

Table3-2 Expansion card and expansion slot compatibility for the S5590-48T4XC-HI and
S5590-48S4XC-HI switches
Expansion
card
S5590-48T4XC-HI
S5590-48S4XC-HI
Expansion slot 1 Expansion slot 2
mode0 mode1 mode2 mode0 mode1 mode2
LSPM6FWD Supported Not
supported Supported Supported Supported Supported
LSWM2EC Not
supported Supported Supported Supported Supported Supported
LSWM2QP2
P Supported Not
supported Supported Supported Supported Supported
LSWM2SP2
PB Not supported Supported Supported Supported Supported Supported
LSWM2SP4
PB Not supported Supported Supported Supported Supported Supported
LSWM2SP8
P Not supported Not supported Supported Supported Supported Supported
LSWM2ZQP
2P Not supported Not supported Not supported Supported Supported Supported
LSWM2ZSP
8P Not supported Not supported Not supported Supported Supported Supported
The power supplies support asset management. You can use the display device manuinfo
command to view the name, sequence number, and vendor of the power supply you have installed
on the switch.
For non-PoE switches, you can install one power supply, or two power supplies for 1+1 redundancy
on the switch.
For PoE switches, you can install one power supply, or two power supplies for 1+1 redundancy on
the switch. PoE capabilities vary by power supply configuration. When a power supply fails, PoE
capabilities of the switch might decrease. For more information about PoE power capacity, see
Table1-5.
The switch uses removable fan trays. Do not power on the switch if it does not have two fan trays of
the same model installed.
For the S5590-48T4XC-HI and S5590-48S4XC-HI switches, you can use the port-speed-mode
command to configure the port rate mode for an expansion slot. By default, the port rate mode for an
expansion slot is mode0. To have the configuration take effect, you must save the configuration and
restart the switch. For more information about the port-speed-mode command, see Ethernet
interface commands in the command reference for the switch.
The S5590-28P8XC-EI (LS-5590-28P8XC-EI-GL), S5590-48P6XC-EI (LS-5590-48P6XC-EI-GL),
S5590-28S8XC-EI (LS-5590-28S8XC-EI-GL), and S5590-48S4XC-EI (LS-5590-48S4XC-EI-GL)
switches support shipping with fan trays and power supplies installed. For the switch to be shipped
with fan trays or power supplies installed, contact the marketing staff.