ENFORCER VA-2101B-WQ User manual

ENFORCER VIDEO AMPLIFIER
4SECO-LARM U.S.A., Inc.
Power LED indicator not lit • Make sure power is connected to the amplifier.
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2008 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Tel: [phone] Fax: [phone]
E-mail: sales @ seco-larm.com
mi-VA-2X0XB-WQ.docx
Troubleshooting:
Video Amplifier does • Make sure the power, input and output cables are
not function correctly
connected firmly to the distributor.
• Make sure the video input device is turned on.
• Make sure the video output device is turned on.
• Test the coaxial cable between the video input and the
amplifier to make sure it is functional.
• Test the coaxial cable between the video output and the
amplifier to make sure it is functional.
PITSW4
Also Available from SECO-LARM:
Passive VGA Balun Passive Video Balun BNC-to-VGA Converter
EVT-PB1QEVT-SBP-GQ VC-1BAQ
SECO-LARM has a complete line of security products.
Please visit www.seco-larm.com for more information.
VA-2101B-WQ
The ENFORCER VA-2101B-WQ and VA-2404B-WQ Video Amplifiers are the ideal way
to boost the strength of video signals. Using the included 12VDC power adapter, video
signals are amplified for transmission distances of up to 3280’ (1000m). Brightness and
sharpness adjustments can be madeindependently for each channel to provide fine-
tuning of video signals.
VA-2404B-WQ
1 Video Input
1 Video Output 4 Video Inputs
4 Video Outputs

MANUAL
Video Amplifiers
Transmission distance
up to 3280’ (1000m)

ENFORCER VIDEO AMPLIFIER
2SECO-LARM U.S.A., Inc.
Overview:
VA-2101B-WQ
V
A-2404B-WQ
Number of inputs 1 4
Number of outputs 1 4
Maximum range 3280’ (1000m)
Video input level 0.8~1.2Vpp, 75ohms
Video output level 1Vpp, 75ohms
Video bandwidth 10hz-10MHz
Power supply 12VDC
Current consumption 100mA 220mA
Dimensions 5" x 41/8" x 13/8" (127 x 104
x 35
mm)
Weight 4.1 oz (116g) 6.3
oz. (116g)
Features:
•Compatible with both color and B/W signals.
•Transmission distance up to 3,280’ (1,000m).
•Connect to a video camera, multiplexer, DVR
and so on.
•Gold-plated BNC connectors
Specifications:
Dimensions:
•Sharpness and brightness adjustments for
each channel.
•12VDC power adapter included.
•Pass-through circuit: Power output can power
nearby devices.
VA-2404B-WQ
VA-2101B-WQ
11/4"(32mm)
Video in
p
ut
Video out
p
ut
Power In
p
ut
Sharpness
control knobs
Brightness
control knobs
5"(104mm)
41/8"
(104mm)
5"(104mm)
ENFORCER
Power loop out
Power LED
ENFORCER
ENFORCER
ENFORCER VIDEO AMPLIFIER
SECO-LARM U.S.A., Inc 3
Sample Application VA-2101B-WQ:
CCTV
Camera
Display
12VDC Power
adapter (included)
Installation:
1. Mount and install the amplifier where the video inputs and outputs can be easily accessed.
2. Connect the video output of each camera to the female BNC input connector(s) on the amplifier.
3. Connect coax cable from the female output BNC connector(s) to the DVR or display.
4. Connect power to the distributor with the included 12VDC power adapter.
5. Turn on power to the video input and the video output units the amplifier is connected to.
Sample Application VA-2404B-WQ:
VA-2101B-WQ
Brightness and Sharpness
Adjustments:
The ENFORCER VA-2101B-WQ and VA-2404B-WQ
Video Amplifiers have sharpness and brightness
adjustments for each channel. Turn the knobs with a
small screwdriver clockwise to increase the
sharpness or brightness, or counter-clockwise to
decrease them.
Up to 3280’ (1000m)
VA-2404B-WQ
Display
Up to 3280’ (1000m)
CCTV
Cameras
E
NFORCER
E
NFORCER
DVR
Power Loop Out:
The ENFORCER VA-2101B-WQ and
VA-2404B-WQ Video Amplifiers have
the ability to power other 12VDC
devices. Connect other devices to the
Power Loop Out terminal blocks.
NOTE: The current draw of the Video
Amplifiers will lower the amount of
voltage present at the Power Loop Out.
To ensure proper operation of
connected devices, first check the
volta
g
e
p
resent at the terminal blocks.
Brightness
Sharpness
12VDC Power
adapter (included)