Enrock Marine EMCBK1 Operating instructions

EMCBK1 / EMCWT1
Universal Marine Waterproof Radio Cover
INSTALLATION / OWNER’S MANUAL
Limited One Year Warranty
This warranty gives you specific legal rights. You may also have other rights which vary from state
to state.
Enrock warrants this product to the original purchaser to be free from defects in material and
workmanship for a period of one year from the date of the original purchase.
Enrock agrees, at our option, during the warranty period, to repair any defect in material or
workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed
necessary) in exchange without charges, subject to verification of the defect or malfunction and
proof of the date of purchase. Subsequent replacement products are warranted for the balance of
the original warranty period.
Who is covered? This warranty is extended to the original retail purchaser for products purchased
and used in the U.S.A. What is covered? This warranty covers all defects in material and workman-
ship in this product. The following are not covered: installation/removal costs, damage resulting
from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line
voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage
occurring during return shipment of the product.
What to do?
Before you call for service, check the troubleshooting guide in your owner’s manual. A slight
adjustment of any custom controls or connections discussed in your instruction booklet may
save you a service call.
If you require service during the warranty period, you must carefully pack the product
(preferably in the original package) and ship it by prepaid transportation with a copy of the
original receipt from the retailer to an authorized service center.
Please describe your problem in writing and include your name, a USA return shipping address
(P.O. Box not acceptable), and a daytime phone number with your shipment.
For more information and for the location of the nearest authorized service center please
contact us by one of the following methods:
Call us toll-free at 1-844-336-7625
E-mail us at [email protected]
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other
warranties, expressed or implied, including without limitation the implied warranties
of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or
remedy in contract or tort, whether or not arising from the company’s negligence, actual or
imputed. No person or representative is authorized to assume for the company any other liability
in connection with the sale of this product. In no event shall the company be liable for indirect,
incidental or consequential damages.

size：15x20cm
Installation EMCBK1/EMCWT1
1 2
INTRODUCTION
The Enrock Weather Shield has been designed for the marine environment.
When the cover is down and closed, it meets with special gaskets positioned in the
front and rear of the base plate, forming a seal to protect your stereo. The cover
provides quick and easy stereo accessibility.
The Enrock Weather Shield works with most shaft and din style radios.
Parts list:
Weather Shield base and lid assembly (1)
Rear Gasket (1)
1" Phillips head screws (6)
Instruction Manual(1)
Front Gasket
stereo’s
mounting sleeve
Din Stereo
Weather Shield base
and lid assembly
Rear Gasket
INSTALLATION
DIN UNIT INSTALLATION
1) Using the supplied drilling template, trace the opening and drilling
location outline onto the proper mounting location. Cut out and drill the
proper openings. Note: The mounting screws require a 3/32” drilled hole.
2) Position the rear gasket onto the backside of the Weather Shield, using
proper care to align the gasket.
3) Using the supplied Phillips head screws, attach the Weather Shield, using
proper care to align the gasket.
4) Press the front gasket into the front side of the Weather Shield, using
proper care to align the gasket.
5) Insert the stereo’s mounting sleeve in the opening of the base. Secure the
mounting sleeve to the mounting surface by bending the tabs outward
(see below) Note: The mounting sleeve is supplied with your stereo.
6) Connect the stereo wiring harness to the car/boat. Insert the stereo into
the sleeve, making sure the stereo locks into place properly.