Entone Kamai 500 Series User manual

KAMAI 500
DUALBAND WIFI ADAPTER
Quick Start Guide
What’s Included
WARNING: e Kamai 500 Dual-band Wi-Fi Adapter
should not be installed in Desktop/Notebook Computer.
PC/Laptop will not recognized this device when con-
nected to USB port.
Kamai 500
Dual-band Wi-Fi Adapter
Quick Start Guide
Installation
1. Connect the Wi-Fi Adapter to USB port on
Kamai 500 Set-Top-Box.
2. Powering up the Kamai.
3. Congure the Kamai to use Wireless Network.*
Added Range and Performance
For added range and performance, you can turn up the
antenna for increased Wi-Fi performance.
NOTE: You may adjust the angle of the antenna for the
best performance.
COPYRIGHT ©2013 Entone, Inc. All rights reserved. Entone,Kamai and “connecting
the home” are registered trademarks of Entone, Inc. All other trademarks or regis-
tered trademarks belong to their respective owners.
P/N: 99-709704-00 - V1.1
NOTE: Contact your service provider for more details
and instructions about the wireless network congura-
tion.

Declaration of Conformity
To ensure proper use of this product, please read this manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location. To prevent re or shock hazard, do not expose this product to rain or moisture. To reduce the risk of electric shock, DO NOT remove the cover or back. No user serviceable parts are inside.
For servicing refer to qualied personnel. Declaration of Conformity (United States Only) is device complies with Part 15 of the FCC Rules. Operation is subject to the following con- ditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. is equip- ment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communication Commission (FCC) Rules. ese limits are designed to provide reasonable protection against harmful interference in a residential installation. is equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communi- cations. However, there is no guarantee that interference will not occur in a particular installa- tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to a dierent circuit from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. is transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: is equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. is equipment should be installed and operated with minimum distance 20cm between the radiator & your body. For product available in the USA/Canada market, only channel 1~11 can be operated. Selec- tion of other channels is not possible. is device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. • FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. •is device will not permit operations on channels 116-128 for 11na and 120-128 for 11a which overlap the 5600 -5650MHz band.