Entone Amulet User manual

Amulet
HighDefinitionTelevisionReceiver
User’s Guide
P/N: 98-80xxxx-03

COPYRIGHT
©2008 Entone, Inc. All rights reserved. This document contains proprietary information
protected by copyright. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording or otherwise, without the prior written consent of Entone, Inc., 2755 Campus
Drive, Suite 235, San Mateo, CA 94403. U.S.A.
DISCLAIMER
IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM
THE COPYRIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH
COULD RESULT IN DAMAGES OR OTHER REMEDIES.
TRADEMARKS
Entone and the tagline “Connecting the Home” are trademarks of Entone, Inc. All other
trademarks or registered trademarks belong to their respective owners.
CHANGES
The material in this document is for information only and is subject to change without
notice. While reasonable efforts have been made in the preparation of this document to
assure its accuracy, Entone, Inc. assumes no liability resulting from the use of the
information contained herein.
Entone, Inc. reserves the right to make changes in the product design without reservation
and without notification to its users.
P/N: 98-80xxxx-03 May 2008
CUSTOMER SUPPORT AND CONTACT INFORMATION
For Customer Support please call: 650.572.7000
Customer Contact Information:
Entone, Inc.
2755 Campus Drive
Suite 235
San Mateo, CA 94403
U.S.A.
Tel: [phone]
www.entone.com

Copyright ©2008 Entone, Inc. All rights reserved
1
Table of Contents
Declaration of Conformity....................................................................................................................................................2
Preface.................................................................................................................................................................................5
TYPOGRAPHICAL CONVENTIONS......................................................................................................................5
OVERVIEW OF THIS USER’S GUIDE...................................................................................................................5
1.1 Safety Precautions..................................................................................................................................................6
OPERATION AND CARE.........................................................................................................................................6
2.1 Index to Parts and Controls ....................................................................................................................................7
CONTENTS IN THE BOX........................................................................................................................................7
FRONT PANEL AND REAR PANEL.......................................................................................................................8
REMOTE CONTROL................................................................................................................................................9
3.1 Amulet Introduction ...............................................................................................................................................10
ABOUT THE AMULET HIGH DEFINITION TELEVISION RECEIVER...............................................................10
4.1 Connecting the TV.................................................................................................................................................11
CONNECTING THE TV USING COAXIAL CABLE .............................................................................................12
SETTING UP TV TO USE CATV...........................................................................................................................12
CONNECTING THE TV USING RCA COMPOSITE............................................................................................13
CONNECTING THE TV USING HDMI OR COMPONENT.................................................................................14
SETTING HDMI AND COMPONENT OUTPUT RESOLUTION.........................................................................16
SETTING CHANNEL ID.........................................................................................................................................16
5.1 Connecting Audio System.....................................................................................................................................17
6.1 Powering-Up Amulet.............................................................................................................................................19
7.1 Remote Controls ...................................................................................................................................................21
LOADING BATTERIES ..........................................................................................................................................21
CONTROLLING THE AMULET.............................................................................................................................22
CONTROLLING YOUR TELEVISION AND OTHER A/V DEVICES ..................................................................24
8.1 Closed Captioning.................................................................................................................................................25
9.1 Aspect Ratio ..........................................................................................................................................................26
10.1 User Menu.............................................................................................................................................................27
USING USER MENU..............................................................................................................................................28
SETTING HDMI AND COMPONENT OUTPUT RESOLUTION.........................................................................32
SETTING CLOSED CAPTIONING........................................................................................................................32
SETTING FAN SPEED...........................................................................................................................................32
SETTING HPNA......................................................................................................................................................33
SETTING TIVO IR KEYCODE...............................................................................................................................33
11.1 Specifications.........................................................................................................................................................34
12.1 Troubleshooting the Amulet..................................................................................................................................36

Copyright ©2008 Entone, Inc. All rights reserved
2
Declaration of Conformity
To ensure proper use of this product, please read this manual carefully and
retain it for future reference. Should the unit require maintenance, contact an
authorized service location.
WARNING: This symbol indicates the presence of uninsulated dangerous
voltage within the product's enclosure that constitutes a risk of electric shock.
Do not open the product's case.
CAUTION: This symbol indicates you must take care; there is risk of damage
to the equipment or to yourself.
To prevent fire or shock hazard, do not expose this product to rain or
moisture. To reduce the risk of electric shock, DO NOT remove the cover or
back. No user serviceable parts are inside. For servicing refer to qualified
personnel.
Declaration of Conformity (United States Only)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the Federal Communication Commission (FCC) Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment OFF and ON, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the
receiver.
•Connect the equipment to a different circuit from that to which
the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
help.

Amulet High Definition Television Receiver User’s Guide
Copyright ©2008 Entone, Inc. All rights reserved .
3
Part 68 - Compliance Registration
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. A label on the bottom of this equipment contains,
among other information, the Ringer Equivalence Number (REN) and the
product identifier. For products approved after July 23, 2001 the product
identifier is in the format US:AAAEQ##TXXXX. The digits represented by ##
are the REN without a decimal point (e.g. 03 is a REN of 0.3). The REN is
used to determine the number of devices that may be connected to a
telephone line. For earlier products, the REN is separately shown on the
label. If requested, this number must be provided to the telephone company.
Excessive RENs on a telephone line may result in the devices not ringing in
response to an incoming call. In most, but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may
be connected to a line, as determined by the total RENs, contact the local
telephone company. This equipment is designed to connect to the telephone
network or premises wiring using a compatible modular jack that is Part 68
compliant. An FCC compliant telephone cord and modular plug is provided
with the equipment. If this terminal equipment causes harm to the telephone
network, the telephone company may request you to disconnect the
equipment until the problem is resolved. The telephone company will notify
you in advance if temporary discontinuance of service is required. If advance
notification is not practical, the telephone company will notify you as soon as
possible. You will be advised of your right to file a complaint with the FCC if
you believe such action is necessary. If you experience trouble with this
equipment, do not try to repair the equipment yourself. The equipment cannot
be repaired in the field. Contact your ISP for further instructions. The
telephone company may make changes to their facilities, equipment,
operations, or procedures that could affect the operation of this equipment. If
this happens, the telephone company will provide advance notice in order for
you to make the modifications necessary to maintain uninterrupted service. If
your home has specially wired alarm equipment connected to the telephone
line, ensure that the installation of this equipment does not disable your alarm
equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or a qualified installer. This equipment
cannot be used on public coin phone service provided by the telephone
company. Connection of this equipment to party line service is subject to
state tariffs.
Declaration of Conformity (Europe Only)
This product is in conformity with the Council Directives:
•EMC Directive 89/336/EEC
•Low voltage Directive 73/23/EEC
Entone products are designed and tested to meet IEC00065, the standard for
the Safety of Information Technology Equipment. This is the international
standard for these types of products to reduce the risk of product damage
and of personal injury. The standard protects against the following hazards:
•Electric shock
•Hazardous voltage levels
•Fire — Overload, temperature, material flammability
•Energy — Circuit with high energy or potential as burn hazards
•Heat — Accessible part of the product at high temperatures
•Radiation
•Noise