Epomaker TH80 X User manual

QUICK START GUIDE
UK REP
EPORKER
EPOMAKER TH80 X
ESC
TAB
CAPSLOCK A
F12
2
w
s
3
E
4
R
5 6 7
J
8 9
O
L
p
K
DEL
BACKSPACE
ENTER
PGUP
75% Hot-Swap Wired/ Wireless RGB Mechanical Keyboard
with An LED-Screen
Should you require more assistance please email us at [email protected]
COMPLIANT
6.
Made in China
Manufacturer: Shenzhen Changyun Technology CO.,Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road,
Xili Street, Nanshan Disctrict, Shenzhen,Guangdong, CN
Email: [email protected]
Web: www.epomaker.com
EC REP
APEX CE SPECIALISTS LIMITED
unit 3d North Point House, North Point Business Park,
New Mallow Road cork, T23 AT2P, Ireland
Contact: Wells Tel: [phone]
APEX CE SPECIALISTS LIMITED
89 Princess Street, Mancheste, MI 4HT, UK
Contact: Wells E—mail:

WINDOWS SHORTCUTS MACOS SHORTCUTS
FN + Fl
FN + FIO
FN + Fil
FN + F12
FN+I
FN + WIN
Screen Brightness -
Screen Brightness +
Task
Explorer
Mail
My Computer
Previous Track
Play/Pause
Next Track
Mute
Volume -
Volume +
Insert
Home
End
PrtSc
Scroll Lock
Pause
Lock/Unlock Win Key
Fl
FIO
Fli
F12
FN+K
FN+L
Screen Brightness -
Screen Brightness +
Task
Search
Mic
Sleep
Previous Track
Play/Pause
Next Track
Mute
Volume -
Volume +
Insert
Home
End
FUNCTION KEY COMBINATIONS
LIGHT EFFECTS
Turn On/Off Backlights
FN + BACKSPACE
Toggle RGB Effects
Toggle RGB Colors
Backlights Brightness -
Backlights Brightness +
Backlights Speed -
Backlights Speed +
FN+ESC
(HOLD 3S)
FN + KNOB
Reset the Keyboard
Short Press to Switch to BTI;
Long Press to Pair Devices
Short Press to Switch to BT2;
Long Press to Pair Devices
Short Press to Switch to BT3;
Long Press to Pair Devices
Short Press to Switch to 2.4G Mode;
Long Press to Pair Devices
Wired Mode
Enter / Exit the Knob-Screen Interactior

PAIRING BLUETOOTH
Toggle the switch on the top-right corner to make sure that the
keyboard is under the wireless mode:
1. Hold Fn+1/2/3 for 3-5 seconds till the LED screen displays pairing signals, the keyboard is ready
to pair.
2. Turn on your Bluetooth device and find "TH80 X BT5.O" or "TH80 X BT3.O", then connect. When
the keyboard is connected to the Bluetooth device, the LED screen displays that the connection is
done.
3. Press Fn+1/2/3 to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHZ
Toggle the switch on the top-right corner to make sure that the
keyboard is under the wireless mode:
Hold Fn+4 for for 3-5 seconds till the LED screen displays pairing signals, the
keyboard is ready to pair.
Insert the 2.4G dongle to your device, the LED screen displays that the connection is
done.
WIRED MODE
Toggle the switch to the wired mode, press Fn+5 till the the LED screen displays
current status of the keyboard, and the keyboard enters to the wired mode
successfully.
INTERACTION OF THE KNOB AND THE LED SCREEN
Step 1.Press Fn+Knob to set the main display on the screen. Rotate the knob among the static images,
gif, or the keyboard status.
Step 2. Press the knob to confirm the main display and goes to the menu options.
*Step 3. Rotate the knob to choose the menu among "Photo/gif", "Lights", "RGB Color", "Brightness",
"Speed", "OS Mode", "Layer", press the knob to enter the menu, rotate the knob to choose among the
options, press the knob again to confirm and go back to the menu.
Step 4. Press Fn+knob again to exit the interaction. Rotate and press the knob resumes to volume &
mute control.
*Note: if the knob is not pressed or rotated in 5 seconds in Step 3, the display will go back to the main
display. Press the knob again to continue Step 3.
SPECS
MODEL:
KEYS AMOUNT:
SCREEN:
STRUCTURE:
STABILIZER TYPE:
PCB TYPE:
BATTERY CAPACITY:
CONNECTIVITY:
ANTI-GHOST KEY:
POLLING RATE:
COMPATIBILITY:
DIMENSION:
WEIGHT:
EPOMAKER TH80 X
79 Keys
LED
Gasket-like mount
Plate-mounted
3/5-pin Hotswap PCB
4000mAh
Type-C Wired, 2.4 & Bluetooth Wireless
NKRO in all modes
IOOOhz in Type-C Wired & 2.4G modes
WINDOWS/MAC
325 x 135 x 30 mm
Around 0.9kg

0
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
Push Straight
Down
Please be gentle. Be sure
the pins are aligned with
the slots.
Before installing switches, be sure the pins are clean and straight.
n
EPOMAKER
Included
Tools
Switch Puller
Remove Switches
Mechanical
Switch
Example of a switch
as seen from top
after you remove the
keycap to prepare for
switch removal.
Keycap Puller
Logo
Switch Shaft
The Switch Puller tool aligns Vertically to the Switch to
unclip the plastic securing the switch to the plate.
Install Switches
1. Grab your Switch Removal Tool and align the gripping teeth
vertically (on the Y -Axis) at the center of the switch, as shown in
the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until
the switch releases itself from the plate.
3. Using firm but gentle force pull the switch away from the
keyboard using a vertical motion.
2.
3.
4.
Check that all the switch metallic pins are perfectly straight and clean.
Align the switch vertically to have the Gateron logo facing north. The
pins should align themselves to the keyboard PBC.
Press the switch down until you hear a click. This means your switch
clips have attached themselves to the keyboard plate.
Inspect the switch to ensure it's properly attached to your keyboard,
and test it.
Note: If the key doesn't work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing
keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid
damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE
For technical assistance, please email to
[email protected] with your purchase order number and
a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you
purchased your keyboard from a distributor or not from any
official store of Epomaker, please contact them directly for any
additional help.
COMMUNITY FORUMS
Join our community and learn together with
other keyboard enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/r/Epomaker/
WARRANTY
EPOMAKER's Warranty covers any factory defects that might
affect the proper functionality of your purchase. It doesn't
cover any damage that may occur from normal wear and tear.
If your product is defective we will send you a replacement
unit. Replacement units might require you to send the
defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought
from our website (EPOMAKER.com). Your item will not be
covered by your 1 year warranty if the inspection shows any
sign of modification or changes unsupported by the original
product, these include: Changing internal components,
Assembling and reassembling the product, Replacing
Batteries, etc.
We will ONLY cover the item if it is bought from our official
stores. You do not have a warranty with us if you bought the
item from another reseller or likewise. Please contact the store
that you bought your product from to resolve issues.