Epomaker TH68 PRO User manual

EPOMAKER TH68 PRO
65% Hot Swappable RGB 2.4Ghz/Bluetooth 5.0/Wired
Mechanical Gaming Keyboard
Should you require more assistance please email us at [e-mail]

WINDOWS
FN + 1
F1
FN + J
Insert
FN + 2
F2
FN + K
Home
FN + 3
F3
FN + ,<
End
FN + 4
F4
FN + U
PrtSc
FN + 5
F5
FN + I
Scroll Lock
FN + 6
F6
FN + O
Pause
FN + 7
F7
FN + WIN
Lock/Unlock
Win Key
FN + 8
F8
FN + 9
F9
FN + 0
F10
FN + -
F11
FN + =
F12
FN + 1
Screen Brightness -
FN + 2
Screen Brightness +
FN + 3
Task
FN + 4
Siri
FN + 5
FN + 6
FN + 7
Previous Track
FN + ESC
(HOLD 3S)
Reset the Keyboard
FN + ESC
(SHORT PRESS)
`
FN+SHIFT+ESC
~
FN + Q
Short Press to Switch to BT1;
Long Press to Pair Devices
FN + W
Short Press to Switch to BT2;
Long Press to Pair Devices
FN + E
Short Press to Switch to BT2;
Long Press to Pair Devices
FN + R
Short Press to Switch to 2.4G Mode;
Long Press to Pair Devices
FN + B
Battery Check
FN+SPACEBAR
(HOLD)
Check Layer & Mode
FN + Z/X/C/V
Switch among the Layers
1/2/3/4
FN + BACKSPACE
Turn On/Off Backlights
FN + DEL
(SHORT PRESS)
Toggle RGB Effects
FN + DEL
(HOLD 5S)
Record RGB
FN + ↑
Backlights Brightness +
FN + ←
Backlights Speed -
FN + →
Backlights Speed +
FN + PGDN
Toggle RGB Colors
FN + PGUP
Toggle Side Lights
FN + ↓
Backlights Brightness -
FN + 8
Play/Pause
FN + 9
Next Track
FN + 0
Mute
FN + -
Volume -
FN + =
Volume +
MAC
FUNCTION KEY COMBINATIONS LIGHT EFFECTS
PAIRING BLUETOOTH
Toggle the switch in the back to make sure that the keyboard is under
the wireless mode:
1. Hold Fn+Q/W/E for 3-5 seconds till the indicators flashes fast in blue, the keyboard is ready to pair.
2. Turn on your Bluetooth device and find “TH68 PRO BT5.0” or “TH68 PRO BT3.0”, then connect.
When the keyboard is connected to the Bluetooth device, the light on the Q/W/E key stops flashing
and the connection is done.
3. Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHz
Toggle the switch in the back to make sure that the keyboard is under the
wireless mode:
1. Hold Fn+R for for 3-5 seconds till the light flashes fast in green, the keyboard is ready to pair.
2. Insert the 2.4G dongle to your device, the R key stops flashing green and the connection is done.
CHECK BATTERY
Hold Fn+B, the keys from 1! to 0) lights up to show the battery percentage; for example, if the
keys from 1! to 6^ light up when holding Fn+B, it means that the battery life is currently 60%; if
keys of 1!-0) light up, battery life is 100%.
CHECK LAYER AND MODE
Hold Fn+Spacebar, the indicators of Z/X/C/V, Q/W/E/R and W/M light up to show at which layer and
which mode the keyboard is; for example, if the keys of X, E and M light up when holding
Fn+Spacebar, it means that the keyboard is in layer 2 in the Mac mode and connected to BT3 device.
SPECS
MODEL:
KEYSAMOUNT:
STABILIZERTYPE:
PCBTYPE:
BATTERYCAPACITY:
CONNECTIVITY:
ANTI-GHOSTKEY:
POLLING RATE:
COMPATIBILITY:
DIMENSION:
EPOMAKER TH68 Pro
67Keys
Plate-mounted
3/5-pin HotswapPCB
2400mAh
Type-CWired, 2.4&BluetoothWireless
NKROin all modes
1000hz inType-C Wired & 2.4G modes
WINDOWS/MAC
330x120 x35mm
WEIGHT: Around0.98kg
EN

WINDOWS
FN + 1
F1
FN + J
Insert
FN + 2
F2
FN + K
Home
FN + 3
F3
FN + ,<
End
FN + 4
F4
FN + U
PrtSc
FN + 5
F5
FN + I
Scroll Lock
FN + 6
F6
FN + O
Pause
FN + 7
F7
FN + WIN
Lock/Unlock
Win Key
FN + 8
F8
FN + 9
F9
FN + 0
F10
FN + -
F11
FN + =
F12
FN + 1
Screen Brightness -
FN + 2
Screen Brightness +
FN + 3
Task
FN + 4
Siri
FN + 5
FN + 6
FN + 7
Previous Track
FN + ESC
(HOLD 3S)
Reset the Keyboard
FN + ESC
(SHORT PRESS)
`
FN+SHIFT+ESC
~
FN + Q
Short Press to Switch to BT1;
Long Press to Pair Devices
FN + W
Short Press to Switch to BT2;
Long Press to Pair Devices
FN + E
Short Press to Switch to BT2;
Long Press to Pair Devices
FN + R
Short Press to Switch to 2.4G Mode;
Long Press to Pair Devices
FN + B
Battery Check
FN+SPACEBAR
(HOLD)
Check Layer & Mode
FN + Z/X/C/V
Switch among the Layers
1/2/3/4
FN + BACKSPACE
Turn On/Off Backlights
FN + DEL
(SHORT PRESS)
Toggle RGB Effects
FN + DEL
(HOLD 5S)
Record RGB
FN + ↑
Backlights Brightness +
FN + ←
Backlights Speed -
FN + →
Backlights Speed +
FN + PGDN
Toggle RGB Colors
FN + PGUP
Toggle Side Lights
FN + ↓
Backlights Brightness -
FN + 8
Play/Pause
FN + 9
Next Track
FN + 0
Mute
FN + -
Volume -
FN + =
Volume +
MAC
FUNCTION KEY COMBINATIONS LIGHT EFFECTS
PAIRING BLUETOOTH
Toggle the switch in the back to make sure that the keyboard is under
the wireless mode:
1. Hold Fn+Q/W/E for 3-5 seconds till the indicators flashes fast in blue, the keyboard is ready to pair.
2. Turn on your Bluetooth device and find “TH68 PRO BT5.0” or “TH68 PRO BT3.0”, then connect.
When the keyboard is connected to the Bluetooth device, the light on the Q/W/E key stops flashing
and the connection is done.
3. Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHz
Toggle the switch in the back to make sure that the keyboard is under the
wireless mode:
1. Hold Fn+R for for 3-5 seconds till the light flashes fast in green, the keyboard is ready to pair.
2. Insert the 2.4G dongle to your device, the R key stops flashing green and the connection is done.
CHECK BATTERY
Hold Fn+B, the keys from 1! to 0) lights up to show the battery percentage; for example, if the
keys from 1! to 6^ light up when holding Fn+B, it means that the battery life is currently 60%; if
keys of 1!-0) light up, battery life is 100%.
CHECK LAYER AND MODE
Hold Fn+Spacebar, the indicators of Z/X/C/V, Q/W/E/R and W/M light up to show at which layer and
which mode the keyboard is; for example, if the keys of X, E and M light up when holding
Fn+Spacebar, it means that the keyboard is in layer 2 in the Mac mode and connected to BT3 device.
SPECS
MODEL:
KEYSAMOUNT:
STABILIZERTYPE:
PCBTYPE:
BATTERYCAPACITY:
CONNECTIVITY:
ANTI-GHOSTKEY:
POLLING RATE:
COMPATIBILITY:
DIMENSION:
EPOMAKER TH68 Pro
67Keys
Plate-mounted
3/5-pin HotswapPCB
2400mAh
Type-CWired, 2.4&BluetoothWireless
NKROin all modes
1000hz inType-C Wired & 2.4G modes
WINDOWS/MAC
330x120 x35mm
WEIGHT: Around0.98kg
EN

EPOMAKER

EPOMAKER